is that with or without pod?

Without a pod, all the details of what’s included are in the first post in this thread it’s just the prices that have changed :thumb:

Just thought i would add that i have found Nick from gaugeplace and he is selling the adaptors still on ebay, he can do them for £27 delieverd now if you contact him direct, i have his details which i can pass onto anyone, well worth buying it would seem rather than the sandwhich plates

are these guages still available? im wanting

oil temp
oil pressure
boost guage

does this include everything need to fit?

PM sent :thumb:
All the info of whats included etc is in the posts :)

Hey folks, just after reading a few of your comments and my oil pressure gauge has been doin exactly the same thing jumpin about etc? I got hold of danny who's sending me out another oil pressure gauge. What should i be replacing or looking at? Aslo has anyone got any pics of the wiring to give the gauges a permanent live so they dont screem eveytime you turn them on?

Cheers

Are we still getting any discount?. im after in green,

Boost, oil pressure, oil temp, water temp, water temp hose adapter thing.



If we are still getting any discount anyone got a number to ring etc. Ready to go now.

Drop Danny at Xyber an email see what he has in stock.
We can get 10% off marked prices :thumb:

Solution to dodgy oil pressure gauge
 

A few posts back I asked about a solution to a problem I had with my oil temp gauge (needle erratic or not working at all). The solution was to replace the sender unit with a replacement from Nick (Gaugeplace). I called him and he was good enough to send out a replacement for a tenner. Swapped it over and the gauge has been behaving ever since.

Thanks to Julie for the original tip.

just ordered me set:thumb:

pm me the details

i would like to buy a set next month for a blobeye scoob ! wheres the best place to get the pod from ( to go above the heaters) 55 blob

If you mean to replace the clock pod the ATI one from Scoobyparts in Bedford is popular, that's what me and my mate got, fits no problem.

Hiya notfub.. Brilliant news on your gauge being sorted..Well guess what? mine is doing it again ! I can't believe it, thought, well hoped it was a dodgy connection but nope.. Glad you got yours going though, I'll drop Nick a line... Julie

We can still get 10% off these gauges.
The full price is now £114.90 so with the discount £103.41 delivered
Go onto Xybers website enter the discount code is "scoobynet_stepperpromo" in the web site when you order and it will give you the discount.
Then can you email Danny danny@globalennovations.com just to tell him I have passed the code on to you and to confirm which gauges you want :thumb:
If you need any other info look through the first few pages lots of info there :thumb:

Was looking on google yest to see what I could find out about Gaugeplace and I saw an recent "old" post on Surrey Scoobies about a guy on ebay who sold Prosport Gauges too. I mailed him yest and he had a new sensor bought it for a £11.00 delivered so fingers crossed that's me sorted.. I think I've just been unlucky with mine as a lot of other people who bought them on the GB have had no issues with theirs, the way it goes sometimes ?

this place sells all the sensors
Stepper Motor/Peak Series : RSpec.co.uk, Performance products for performance cars

best one i got so far
[IMG]http://i144.photobucket.com/albums/r...dew/gauges.jpg[/IMG]

maydew - where did you get your gauge holder, it looks wicked.

Do these gauges come with the sensors/adapters I will need or where do i get them from? I'm looking at Boost, Oil Pressure & Oil Temp.

I have seen lots of dash top pods on ebay but they all say 01-04, I have the version 9 with the new style dash, does anyone know if these will fit?

Chris

:thumb:

yep comes with everythin needed to fit.

pod was from scooby world but to be honest yeah it looks good outside but underneath the fixings where poor,pull off sharp and it would off landed on your lap. i took the heater vent out and bolted it down instead of using the cheap tat fixings that came with it as they were doing nothing.

heres vid and pic
SNV80653.flv video by maydew - Photobucket


i retained the clock from the oem pod and mounted it in the single din unit
[IMG]http://i144.photobucket.com/albums/r...w/SNV80654.jpg[/IMG]

this pod fits upto 2007:thumb:.


dont get me wrong pods looks wicked ,i used 1 13mm nut and bolt (use instead of the clip at the front corner(heater vent out and you get full access to tighten) ,and 2 small strips of foam on the back prongs to stop any rattles

Hi all.... Just a quick one.... finally fitted the gauges almost 6 months after buying them but couldn't quite work out where the exhaust gas temp sensor should be fitted.

Has anyone else bought one of these and fitted it? Any tips or ideas?

Just going to order boost, oil temp & oil pressure gauges; what's the standard measurement you guys get? Bar or PSI?

personal choice i always get bar...



i have fitted my exhaust gas temp sensor in the up pipe just before the turbo, where the factory one is if you have a cat in place(newage),you will need an adaptor tho
"10) ADAPTOR 1/8NPT (F) TO M12x1.25 (M) SHORT STYLE"

https://www.europaspares.com/INSTRUM...EADS_2007.html

Anyone got a decent guide to fit the normal boost oil temp / pressure on a new age STI ?

http://https://www.scoobynet.com/int...ure-boost.html
Hi, maybe this will help, It's for a classic but maybe you could use it as a rough guide
Cheers
James

are these gauges dimable at all?

just ordered mine, cant wait to get them fitted!!

Cheers ScoobyNet!:)

No not dimmable. You can have either white or amber illumination.

Thanks for your reply mate... Although it is a newage it has been decatted all the way through.... Do I still need this adaptor? :wonder:

Is there a factory fit standard exhaust gas temp?!? :confused: