Originally Posted by KK3960
Yes i would be interested in a set of these for my newage, as mentioned previously can we obtain a cost for the rears and do we know if the pad fitment is common so Ferodo or Mintex pads can be fitted ??
Cheers As far as I know most of the big names do a pad to fit these kits but as there is little demand for them over here they'd probably need ordering in specially. |
Originally Posted by Bartop
I'm a possible for these too - are the drilled and grooved discs more expensive ?
Doh - just read the post properly....shame as the drilled look superb :( Also interested in rears btw.. :) |
Originally Posted by Houghton
I asked this on the other thread, but didn't get an answer :(
Does anyone know how the pad contact area compares with 4 pot Brembos as the disc swept area looks a little narrow by comparison? Cheers http://brakepads.wilwood.com/06-illu...ages/7320.html |
Hi Danny - has the list increased as yet? How many ppl on board? And how many ppl will you need for the group buy coz I'm very interested, but short on cash for the next month or so... :wonder:
|
Just started the official list last night on the previous page so just the one on there so far. Plenty of people said they were interested though so just waiting for them to confirm thier interest by adding to the list to see how many we've got.
I'll be happy to order once we have 10 or more kits so if 5 are having front a rears I'd be happy to go with that. If I had to guess it'll probably 2-4 weeks before I'll be talking money. Stick your name down anyway and see how it goes ;) |
Hi Danny,
Another potential for a set of fronts. I've been spending an absolute fortune on the car recently but i do need to sort out some decent stoppers. circa 400bhp with 2-pots and standard pads probably isnt a good idea :) Cheers Kenny |
Add yourself to number 2 then mate ;)
1. rossi_p, rear kit, MY00 (GC8) with BP-10 pads 2. 3. 4. 5. 6. 7. 8. 9. 10. |
Kenny you're a brave man running that power with standard brakes... :eek2:
1. rossi_p, rear kit, MY00 (GC8) with BP-10 pads 2. alex_00s - front kit... got 19"'s so biggest discs poss & BP-10 pads 3. 4. 5. 6. 7. 8. 9. 10. |
1. rossi_p, rear kit, MY00 (GC8) with BP-10 pads
2. alex_00s - front kit... got 19"'s so biggest discs & pads 3. Bartop (possible) Front and Rears, drilled and grooved. 4. 5. 6. 7. 8. 9. 10.[/quote] |
1. rossi_p, rear kit, MY00 (GC8) with BP-10 pads
2. alex_00s - front kit... got 19"'s so biggest discs & pads 3. Bartop (possible) Front and Rears, drilled and grooved. 4. Houghton (possible) fronts for MY97 + BP-10 5. 6. 7. 8. 9. 10. |
Bartop - What car mate?
|
Originally Posted by DannyBoyTurbo
Bartop - What car mate?
|
That word "should" makes me cringe a bit.
I'm still waiting for rear fitment details to come through to see what exactly is required for each model so I'll let you know what it says ;) |
I've got the prodrive Impreza BBK on the front at the moment so I'm pretty confident it will fit ;)
|
Yeah it's not the front's I'm worried about though mate. The rears require a different bracket dependant on year, model, uk/jap so wouldn't be 100% which to order.
I'm sure they'll know though. |
Come on guys. What happened to all those saying they wanted in?
|
I'd a like a rear set for my classic....... but I am short on cash for this month. and a bit of next month :(
|
Originally Posted by DannyBoyTurbo
Come on guys. What happened to all those saying they wanted in?
Danny - Any feedback on the fronts yet? I could wait and fit mine but i'm too impatient! :rolleyes: ------------------------------------------------------------- Ignore me.... I just saw your post on the other thread... |
Originally Posted by Houghton
1. rossi_p, rear kit, MY00 (GC8) with BP-10 pads
2. alex_00s - MY02 front & rear kit with BP-10 pads 3. Bartop (possible) Front and Rears, drilled and grooved. 4. Houghton (possible) fronts for MY97 + BP-10 5. 6. 7. 8. 9. 10. I have 19's on my car, is there any chance of bigger discs? AP do 362mm, do Wilwood do equiv? :wonder: |
Originally Posted by DannyBoyTurbo
Come on guys. What happened to all those saying they wanted in?
Will be able to post real feedback on the rears though. I have bought a set for a 02+ car and am going to try fitting them to a 1993 WRX, I have some 2 pot rear conversion brackets so fingers crossed I should be able to get them on one way or another. Got the drilled, will post pics when they arrive. |
Sounds good Borat, keep us posted.
|
Originally Posted by alex_00s
I have 19's on my car, is there any chance of bigger discs? AP do 362mm, do Wilwood do equiv? :wonder:
|
Originally Posted by rossi_p
Any buyers of the fronts last time want to complete the set?
Danny - Any feedback on the fronts yet? I could wait and fit mine but i'm too impatient! :rolleyes: ------------------------------------------------------------- Ignore me.... I just saw your post on the other thread... |
Danny I was told that the Wilwoods dont have the dust seals on the pistons?
AP's have dust seals on the pistons to stop grim and crud from the 'occassionally wet' and mucky English roads... As Wilwoods are aimed at the US market where there is practically zero rain or grime on their roads they've constructed the calipers without said necessary dust seals... is this right?? :wonder: |
Before I put my name down for a set, what sort of lead time are we looking at till we would see them once you have enough people to get this GB underway.
I would be after a rear kit only for a 93 import. Cheers steve. |
OK had a few customs troubles myself on these which took a few days to clear but I finally have a set of fronts and backs now.
I'm planning on fitting them to a 1993 classic WRX, and the rears are quoted as fitting a 2002+ model. I've had them out for a good inspection and from what I have been able to peice together in my lounge the rears will need a set of 2 pot conversion brackets to fit. I am still unsure as to how the handbrake fits into all of this but i'm as these work with the handbrake set up on the 2 pot clad impreza's, they should also work with a classic impreza handbrake. I do not think these will fit without the 2-pot bracket as the holes are in the wrong place and the calipers also sit further out in the wheel with 2 pot rears. I anyone can remember how to use the <img> tag to get these to appear here automatically please pm me how to do it, can't get it working for some reason. Here are the photo's http://onfinite.com/libraries/975178/552.jpg http://onfinite.com/libraries/975179/552.jpg http://onfinite.com/libraries/975180/552.jpg http://onfinite.com/libraries/975181/552.jpg http://onfinite.com/libraries/975182/552.jpg http://onfinite.com/libraries/975183/552.jpg |
Please tell me how this goes, Borat, as I might be tempted to get a set for MY95 :)
|
I'm off on holiday from sunday for 2 weeks so it will probably be 3 weeks before I can give a definate yes or no as to whether these are compatible or not.
Will keep things updated when I have them fitted. |
Borat those pics are sexual! :eek:
:lol: |
1. rossi_p, rear kit, MY00 (GC8) with BP-10 pads
2. alex_00s - front kit... got 19"'s so biggest discs & pads 3. Bartop (possible) Front and Rears, drilled and grooved. 4. Houghton (possible) fronts for MY97 + BP-10 5. phelpsa (possible) - Fronts + BP-10 6. 7. 8. 9. 10. |
All times are GMT +1. The time now is 12:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands