Originally Posted by beaujo
(Post 11047488)
Give me a pm rob when they out.cheers
|
Boys FYI I will have a set of 2011 stock Alloys ( as new condition no marks ) they also come wrapped with 4 nokian winter tyres with about 1000 miles on them
any of you want any MSG me please before I ebay. Rob |
Yeah I opted for the fogs instead, the original covers are nasty
|
So the STI has now been taken off the Subaru UK website, does that mean no new ones left at IM?
|
Originally Posted by stevie1982
(Post 11046306)
Here is the completed listing mate
http://www.ebay.co.uk/itm/2211679254...84.m1439.l2649 Cost me about £55 plus £11ish tax and duties. Just a word of warning to all that have fitted covers over fogs, I did this to my hawk and turned the fogs on by mistake one day and it very lightly melted the rear of the cover and warped the fog cover a bit, had it been turned on for any length of time I think it would have been a lot worse, I'll therefore be covering the rear of the cover in some heatproof sheeting just in case. |
Originally Posted by Abx
(Post 11048957)
So the STI has now been taken off the Subaru UK website, does that mean no new ones left at IM?
Stock wise - no idea |
Originally Posted by Abx
(Post 11048963)
Ordered cheers bud, wont go on for a while yet as still using the fogs!!
Just a word of warning to all that have fitted covers over fogs, I did this to my hawk and turned the fogs on by mistake one day and it very lightly melted the rear of the cover and warped the fog cover a bit, had it been turned on for any length of time I think it would have been a lot worse, I'll therefore be covering the rear of the cover in some heatproof sheeting just in case. Do wish Subaru hadn't wired them so that to use the rear fog you have to turn the fronts on first. |
prob a anti numpty device Don
Turn off ya fronts back goes off auto, nowt worse than people driving about with rear fog on cos they forgot. |
Or better still remove the fuse..........
http://homepage.ntlworld.com/donald....ont%20fogs.JPG Just checked - circuit FB-9 is Front Fog Relay only. |
Originally Posted by Abx
(Post 11048957)
So the STI has now been taken off the Subaru UK website, does that mean no new ones left at IM?
|
Few pics of ours so far, hope you like?...........
http://i81.photobucket.com/albums/j2...pscf7a5cf2.jpg http://i81.photobucket.com/albums/j2...psfad8a6fe.jpg http://i81.photobucket.com/albums/j2...psc867745e.jpg http://i81.photobucket.com/albums/j2...ps106776a7.jpg http://i81.photobucket.com/albums/j2...ps7526d92d.jpg http://i81.photobucket.com/albums/j2...psb35eca41.jpg Cheers for looking. Mark @ HTAutos:thumb: |
Looking good Mark...:thumb:
|
Originally Posted by Abx
(Post 11048957)
So the STI has now been taken off the Subaru UK website, does that mean no new ones left at IM?
How does the third brake light come out on these cause mine needs cleaned as its full of dust. Some recent pics of mine http://img.photobucket.com/albums/v3...psdd5c17ea.jpg http://img.photobucket.com/albums/v3...ps5bb2eebc.jpg http://img.photobucket.com/albums/v3...psd915a556.jpg http://img.photobucket.com/albums/v3...psf7a36326.jpg http://img.photobucket.com/albums/v3...ps85abc3aa.jpg |
Originally Posted by Martyn19
(Post 11050560)
I went to see about buying a new one about 6 weeks ago and i was told all they had left was 9 silver ones to order.
How does the third brake light come out on these cause mine needs cleaned as its full of dust. Some recent pics of mine http://img.photobucket.com/albums/v3...psdd5c17ea.jpg http://img.photobucket.com/albums/v3...ps5bb2eebc.jpg http://img.photobucket.com/albums/v3...psd915a556.jpg http://img.photobucket.com/albums/v3...psf7a36326.jpg http://img.photobucket.com/albums/v3...ps85abc3aa.jpg Very nice |
Originally Posted by HT_Autos
(Post 11049076)
Few pics of ours so far, hope you like?...........
http://i81.photobucket.com/albums/j2...pscf7a5cf2.jpg http://i81.photobucket.com/albums/j2...psfad8a6fe.jpg http://i81.photobucket.com/albums/j2...psc867745e.jpg http://i81.photobucket.com/albums/j2...ps106776a7.jpg http://i81.photobucket.com/albums/j2...ps7526d92d.jpg http://i81.photobucket.com/albums/j2...psb35eca41.jpg Cheers for looking. Mark @ HTAutos:thumb: Is the top window spoiler a new product ? Like the look of that :thumb: Is it bonded on ? |
Originally Posted by sniffmydiff
(Post 11050610)
Is the top window spoiler a new product ? Like the look of that :thumb:
Is it bonded on ? |
Originally Posted by Martyn19 https://www.scoobynet.com/images/cit...s/viewpost.gif How does the third brake light come out on these cause mine needs cleaned as its full of dust. http://homepage.ntlworld.com/donald.clark/Stoplight.JPG |
Originally Posted by HT_Autos
(Post 11050740)
Maybe, but not sure yet?
|
yeah, crack on mark.....:D:D..:thumb:
|
Small update. As i have got as far ahead as i can with the exterior I thought it time to start inside. Only a small update but I've never been a fan of the silver gear surround so thought I would try this new plastidip stuff out. Looked on the Web and they are out of stock so off to ebay and a £15 tin is now selling for £30 so thought what the hell and got a can.
Anyhow it was nice and easy to remove, so here is the offending item (forgot to get a pick fitted but we all know what it looks like) http://i45.photobucket.com/albums/f6...ps01f97225.jpg Masked it all up, applied a light coat and allowed it to try. Then on went four heavy coats and left it to dry over night. Left it till mid day and took all the tape off with the help of a Stanley blade. I so here it is http://i45.photobucket.com/albums/f6...ps2c0b6158.jpg And here it is fitted along with a genuine duracon sti gear knob as fitted to the jdm sti's. Had one on my type 25 and loved it so decided that I needed another. Any how here it all is fitted. http://i45.photobucket.com/albums/f6...ps9ce439b8.jpg http://i45.photobucket.com/albums/f6...ps4c3adc2a.jpg It's a lot darker in the flesh, the light doesn't help. Anyway anyone thinking of using the stuff, crack on its a nice product to use. Will see how well it t fairs up yet for now I'm happy. Couple more bits due in the mail and that will be it for the inside. Will update you later Regards |
That looks real nice Steve
|
Originally Posted by Jamie330S
(Post 11051071)
That looks real nice Steve
|
Originally Posted by stevie1982
(Post 11051306)
Cheers dude. Almost bottled it when I had it all taped up and had to apply the first coat as not using it before I didn't know what to expect but very happy with the outcome.
|
Originally Posted by Don Clark
(Post 11050773)
What it doesn't mention below is that there is a plastic locating peg/clip that also needs to be released at the forward end of the unit.
http://homepage.ntlworld.com/donald.clark/Stoplight.JPG Cheers. Will give this a go soon |
http://i272.photobucket.com/albums/j...8/CIMG1219.jpg
Here's my 2012 WRX. Sparco Tarmac 18x8 wheels just arrived today and couldn't wait to take a pic! |
Originally Posted by Yeeman19
(Post 11054071)
http://i272.photobucket.com/albums/j...8/CIMG1219.jpg
EHere's my 2012 WRX. Sparco Tarmac 18x8 wheels just arrived today and couldn't wait to take a pic! Do like those alloys. Post some more pix up. |
Originally Posted by salsa-king
(Post 11054097)
Do like those alloys. Post some more pix up.
|
epic fail by me but.......
Guys as some know i have a 60 plate saloon with the horrible looking fake chrome boot trim which i am looking to paint. Been to halfords and they do not have the code in stock so can not mix the paint so i took to the internet to get some, Found the code, found a supplier in Germany as no one in the uk came up on the search only for chip repair so ordered what was classed as a spray can in the right colour code. it turned up today looking like this http://i45.photobucket.com/albums/f6...psbfd48ee5.jpg so i assume it is in fact a spray tin but not the assumption I made as an aerosol spray tin :facepalm2:and requires a paint gun of some kind. question is where can i get one that does not require a full compression set up? Or anyone know of someone in the Berkshire area that could swap it to an aerosol can for me? any advice welcome |
Originally Posted by Yeeman19
(Post 11054112)
Thanks, I'll post some better pics when I get a chance.
|
Originally Posted by stevie1982
(Post 11054220)
epic fail by me but.......
Guys as some know i have a 60 plate saloon with the horrible looking fake chrome boot trim which i am looking to paint. Been to halfords and they do not have the code in stock so can not mix the paint so i took to the internet to get some, Found the code, found a supplier in Germany as no one in the uk came up on the search only for chip repair so ordered what was classed as a spray can in the right colour code. it turned up today looking like this http://i45.photobucket.com/albums/f6...psbfd48ee5.jpg so i assume it is in fact a spray tin but not the assumption I made as an aerosol spray tin :facepalm2:and requires a paint gun of some kind. question is where can i get one that does not require a full compression set up? Or anyone know of someone in the Berkshire area that could swap it to an aerosol can for me? any advice welcome |
All times are GMT +1. The time now is 04:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands