Lee nice Recaro,love this seat
Jura |
Removed inter cooler pipes ready for heat wrapping
http://i2.photobucket.com/albums/y17...s/f30eb24b.jpg Soaked the tape in water as its easier to apply got the 2" black heat wrap from Alan at AS Performace great price for 50ft http://i2.photobucket.com/albums/y17...s/4473721e.jpg First one wrapped quite impressed really plus it will help better with charge temps http://i2.photobucket.com/albums/y17...s/5bd4cbcf.jpg |
|
Thanks Ryan for making a bracket for inter cooler pipe work that goes down behind the radiator to keep it away from the fan blades spot on job and works a treat.
http://i2.photobucket.com/albums/y17...s/6c484a8f.jpg Looks the dogs mate thanks http://i2.photobucket.com/albums/y17...s/da627b56.jpg http://i2.photobucket.com/albums/y17...s/8438f610.jpg A pic of the car after its first run in over 15 mths needs a bit of setting up but that's Duncan's job bleed the brakes as pedal is still abit spongy then on to trailer to head for RCM http://i2.photobucket.com/albums/y17...s/f4ed0a28.jpg |
|
|
Gave the car a clean today ready for transporting to Hinckley for remap with Duncan on Tuesday
http://i2.photobucket.com/albums/y17...s/7893199c.jpg http://i2.photobucket.com/albums/y17...s/2dde096d.jpg http://i2.photobucket.com/albums/y17...s/016b6a3d.jpg http://i2.photobucket.com/albums/y17...s/51fb50ab.jpg |
Looking good lee, well done for getting it done.
Best of luck for Tuesday mate :thumb: |
Yeah fella looking really nice! All worth it in the end, Congrats mate... All the best for tuesday, bet you can't wait! :D
|
I see you got the graphics done in the end!
|
Fair play Lee it's been a long road but you have got there in the end,all the best for Tuesday mate:thumb:
|
Cheers for the comments chaps
Rob - I did but I suppose it came to me in the end fortunately there is a company next door to where I was working and a handy guy on the PC thanks anyhow rob could do with some door squares and logos if your up for it mate? Ryan - it had been a long road but I'm no millionaire funds have been available due to working hour after hour weekend after weekend but yeh finally there well I suppose there's something else to do going to get it tested soon then taxed and insured so I can drive it to local tracks the trailer further afield thanks fit your support mate fingers crossed no problems on Tuesday GEZ- I wouldn't have if it wasn't for a special friend .... Nudge nudge ! Cheers pal appreciate it Winston- it seems an age ago when I was down yours in Chester picking up the bonnet turned out well don't you think ? Has yours been broken now then ? |
Looking good Lee and really all the best on the Tuesday:thumb:
Jura |
Originally Posted by leecalcars
(Post 10659824)
Winston- it seems an age ago when I was down yours in Chester picking up the bonnet turned out well don't you think ?
Has yours been broken now then ? Yeah the green one's well and truly forgotten about now mate, concentrating on this one now! - https://www.scoobynet.com/projects-4...riverules.html :thumb: |
Well had a hectic final day down the workshop brakes are now spot on and feel solid thanks Tim for pointing out that I had put the rear callipers on the wrong side and explained to me the bleed nipple should be at the top !!! Doh learning all the time.
So after changing those over then to set the resr camber which has been set as a starter to 1.5 deg neg camber with 0.5 on the front with 4 wheel alignment now done aswell it was onto the trailer it went ready for the 3hr drive to Hinckley! I must say I've probably learnt more in the last 2 visits from Tim than in the last 10 years of ownership !!! If you need help he's very helpfully and knowledgeable and would recommend Tim aka (subbus) to anyone thanks for all your help appreciate it. Also thanks to Ryan for sealing all holes in the front arches and making some great inner wings pics up later but again spot on job thanks ! http://i2.photobucket.com/albums/y17...s/23f7b16f.jpg http://i2.photobucket.com/albums/y17...s/fc262ae0.jpg http://i2.photobucket.com/albums/y17...s/68fd19a8.jpg Ready for tommorow for Duncan's magic |
Godspeed! :thumb:
|
Originally Posted by JTaylor
(Post 10661035)
Godspeed! :thumb:
|
Hope mine turns out half as good as your well done :thumb:
|
Hope mine turns out half as good as your well done :thumb:Good luck tomorrow :thumb:
|
I started seriously watching this project when the shell headed off to Custom Cages, noone goes to that trouble & expense unless they are serious.
Hope you get the results you are hoping for tomorrow. |
Originally Posted by leecalcars
(Post 10661149)
? Sorry
http://en.m.wikipedia.org/wiki/Godspeed |
|
Thanks guys it's the first time tnite I've been able to relax knowing the car is all done and no more stressing steady drive up tommorow and hope it holds together .
Not looking for massive power but 350 would be nice , the car has been set up DI should perform well on track . Thanks for all your support just need to find a disc now to download the whole project but I'm sure it's not going to end here just sorting out a few track days at my local to tracks then enter a few sprints later on . Thanks again all for watching Lee |
http://i2.photobucket.com/albums/y17...s/ffa63b69.jpg
http://i2.photobucket.com/albums/y17...s/53499c29.jpg http://i2.photobucket.com/albums/y17...s/3ac2b54f.jpg Made 352bhp and 405 lb/ft today at RCM but had a fuel issue I need to sort out running lean we even had RCM flow check the injectors and they where fine seems to be a blockage somewhere so il be removing all pipe work and cleaning out also going to check the filter is fitted the right way ! Still think its a fuel rail issue but dunc mentioned there's still a bit left but was unsafe to do anymore runs untill this particular problem is solved . Met olly clarke and all the staff at RCM very friendly and helpfully bunch Thanks to Duncan who always puts in 100% even under pressure hope to get this problem rectified and get it back ASAP bit gutted to say the least ! |
That a good result bud hope you get it sorted soon.
+1 for Duncan's hard work seen him running arround and putting 100%. |
Dude, despite what people say to your face all new builds have teething issues. Anyone that does this amount of work on a car will encounter problems in the early days.
Look at what you've done, stand back and realise what a massive achievement you have accomplished so far. Chin up, tiny fuel issue is nothing in the grand scheme of things. I think you should be very proud, well done. :) |
Thanks frayz on the long drive back last night I did feel as though IDE lost the championship , I'm not gona let an issue like this affect me cheers il get there all the joys of modding and learning I suppose:thumb:
|
looks ace mate :thumb:
|
Found the problem the little feckers .....!!!!!!
Spot the difference http://i2.photobucket.com/albums/y17...s/8176e42e.jpg |
Booked on the rollers again at RCM next Thursday lets hope this is it!
All the fuel lines have been cleaned including rails , found that the larger O ring that seals the rail to the manifold somehow found its way into my bench and was fitted with the others I ordered from Carl davey . This is obviously the wrong one coupled with a not so tight fuel rail so sucking in more air than fuel hey presto car runs lean !!! Ordered new set of injector o rings again from Carl davey and re booked another session with Duncan next thursday |
All times are GMT +1. The time now is 02:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands