ScoobyNet.com - Subaru Enthusiast Forum
Page 3 of 7
« First
2
3
4
Last »
Show 30 post(s) from this thread on one page

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Subaru Parts (https://www.scoobynet.com/subaru-parts-451/)
-   -   Breaking Hi spec JDM bugeye STI with twinscroll setup (https://www.scoobynet.com/subaru-parts-451/851908-breaking-hi-spec-jdm-bugeye-sti-with-twinscroll-setup.html)

The Pink Ninja 27 September 2010 07:04 PM



I don't have any pic's of it unfitted as this was on the car when I imported it, I don't want to split it as the bumper will have holes in it where the diffuser fixings are so the bumper would be no good to me if I removed the diffuser.
You could just have the whole thing painted to match your car then sell your bumper :D
Alright m8, No problem but if it is the genuine OEM rear diffuser it uses the holes that are already in the bumper on the underneath as far as i am aware :thumb:

scoobymoz 27 September 2010 07:13 PM
Originally Posted by stiwrxv7 (Post 9623200)
Alright m8, No problem but if it is the genuine OEM rear diffuser it uses the holes that are already in the bumper on the underneath as far as i am aware :thumb:
Yes it's a genuine subaru item.
I've not had the rear diffuser off before but I have had the front splitter off the car before and the bumper has holes drilled in it for some of the fixings so I'm assuming the rear one will be the same.

scoobymoz 27 September 2010 07:51 PM
Fron't brembo setup SOLD pending payment to BugEyedTony via TTS

scoobymoz 27 September 2010 08:59 PM
Front STI grill SOLD to lian blyth via TTS

Cannon Fodder 28 September 2010 03:30 PM
Bump for a top seller, really pleased with the Samco air filter hose, ancillary hoses, coolant hoses and Zerosports radiator panel. :thumb:

All as good as new and delivered quickly. :notworthy

scoobymoz 29 September 2010 11:41 AM
Originally Posted by Cannon Fodder (Post 9624694)
Bump for a top seller, really pleased with the Samco air filter hose, ancillary hoses, coolant hoses and Zerosports radiator panel. :thumb:

All as good as new and delivered quickly. :notworthy
Thanks mate ;) I aim to please :) all the part's on my car are in good condition if they weren't I would say as I don't want to waste my time or anyone else's :thumb:


Bump.

scoobymoz 29 September 2010 08:41 PM
pm's replied to.

scoobymoz 30 September 2010 11:59 AM
All pm's replied to.

scoobymoz 01 October 2010 08:13 AM
pm's replied to.

scoobymoz 01 October 2010 07:56 PM
Bump.

FB Tuning 01 October 2010 08:11 PM
Price on the complete twin-scroll set up please.

Manifold, turbo, sump, pickup pipe,dipstick + tube, exhaust system and all bracketry + turbo pipework

Great-One 01 October 2010 08:24 PM
Anyone thinking of buying from Dave dont hesitate, top guy and describes his items spot on :)

Cheers Dave hope to deal with you again soon matey.

LUCKO 01 October 2010 11:08 PM
condition of bootlid/spoiler?
immaculate i presume and original paint?

scoobymoz 02 October 2010 08:16 AM
Originally Posted by fiestaboy (Post 9630594)
Price on the complete twin-scroll set up please.

Manifold, turbo, sump, pickup pipe,dipstick + tube, exhaust system and all bracketry + turbo pipework
I'll pm you with prices for the above.

Originally Posted by Great-One (Post 9630623)
Anyone thinking of buying from Dave dont hesitate, top guy and describes his items spot on :)

Cheers Dave hope to deal with you again soon matey.
Thanks :thumb:

Originally Posted by LUCKO (Post 9630877)
condition of bootlid/spoiler?
immaculate i presume and original paint?
It's in mint condition without a mark on it, it's been painted but it 100% a top job I wouldn't stand for any thing less, if you want me to send you some pic's drop me a pm with your email address.

SkydiveMacca 02 October 2010 09:06 AM
I know you said you wouldn't, but if you split, how much for the intake manifold?

Also, how much for the flocked dash?

Thanks :-)

scoobymoz 02 October 2010 04:18 PM
Originally Posted by SkydiveMacca (Post 9631114)
I know you said you wouldn't, but if you split, how much for the intake manifold?

Also, how much for the flocked dash?

Thanks :-)
I'm now going to split the turbo setup and inlet parts form the engine.
If you pm me your email address I'll send you some pic's of it.

The price of the dash is in my list but i may split the dash from the other parts.

martin850 02 October 2010 04:24 PM
How chrome handles are there mate 2 or 4? Thanks

scoobymoz 02 October 2010 04:39 PM
Originally Posted by martin850 (Post 9631594)
How chrome handles are there mate 2 or 4? Thanks
There are 4 interior door handles.

Cannon Fodder 02 October 2010 04:43 PM
Me again ;), do you have the under bonnet heat matting and clips for sale?

PM me a price. :thumb:

scoobymoz 02 October 2010 04:52 PM
Originally Posted by Cannon Fodder (Post 9631616)
Me again ;), do you have the under bonnet heat matting and clips for sale?

PM me a price. :thumb:
Welcome back :lol1: Yes I still have it on the car. I'll pm you my number now ;)

martin850 02 October 2010 07:50 PM
Originally Posted by scoobymoz (Post 9631612)
There are 4 interior door handles.
Sorry to sound daft but are they all chrome? Cheers :thumb:

Rammi shaa 02 October 2010 08:36 PM
hi m8 what turbo you got on it ????/ price

#also pink injectors???? price3

thanx

scoobymoz 03 October 2010 10:27 AM
Originally Posted by martin850 (Post 9631902)
Sorry to sound daft but are they all chrome? Cheers :thumb:
Yes all 4 of them are chrome.

Originally Posted by Rammi shaa (Post 9631984)
hi m8 what turbo you got on it ????/ price

#also pink injectors???? price3

thanx
The turbo is a IHI VF37 twinscroll, pm me if you still require a price.

scoobymoz 04 October 2010 09:26 AM
Bump.

Tomwrx 04 October 2010 10:52 AM
rich is looking for a vf37 mate.
https://www.scoobynet.com/wanted-18/...ust-setup.html

scoobymoz 04 October 2010 02:03 PM
Originally Posted by Tomwrx (Post 9634591)

I've already spoke to him. Thanks anyway :thumb:

LUCKO 04 October 2010 02:50 PM
im looking for a complete decat 3" system for a twin scroll jdm sti8, wyg?

scoobymoz 04 October 2010 09:00 PM
Originally Posted by LUCKO (Post 9634992)
im looking for a complete decat 3" system for a twin scroll jdm sti8, wyg?
It's a full 3" H&S system with a 4" slash cut tailpipe.
Pm me your email address and I'll send you some pic's

scoobymoz 05 October 2010 08:16 AM
All pm's replied to.

stiphil 05 October 2010 01:51 PM
dumpvalve arrived this morning. fitted lunch time, works fine.:). Cheers mate.


All times are GMT +1. The time now is 08:36 PM.
Page 3 of 7
« First
2
3
4
Last »
Show 30 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands