What product did you use on the floor of your garage in the end?

Any in-car videos from the track day mate?

How have you connected the braided line for the feed to the connector (3), as this is a clip type connection as standard?

Have you used a worm drive type clip?

http://i2.photobucket.com/albums/y17...rs/tankcon.jpg

Thanks

One of these mate

http://i2.photobucket.com/albums/y17...ps70e406c5.jpg

Glad to see your keeping it Lee :thumb:

How were the dunlops?

Did you try use the original plastic clip at all, i'm thinking of pushing it inside the new teflon braided line and using a worm drive clip to tighten the seal.

Thanks

I used red primer and grey paint from work fantastic stuff il get the codes for you if you like industrial paint tho so won't be cheap !

The X08 were a lot better than the X22 these went off to quick I'd like to try some kumos and pirrelis

The picture shows the correct push on connector same as the standered hose clip but with provision for the adapter for braided lines

http://i2.photobucket.com/albums/y17...4B3DB4A3D7.jpg

Dropped a boo boo mate thought I had switched on to record with a green light and I should have pressed it again for red light ...! Gutted when I got home from Cadwell !!!!

I'm at Mallory on the 13 oct fingers crossed for some nice incar video this time.

Yes keeping it starting the big engine build over winter for a transplant next year 600 is the figure !!!!!

I found a mint Sti standered seat and fitted it tonight with sabelt 4 point harness can give some rides now and remove for sprints

http://i2.photobucket.com/albums/y17...4E424691D0.jpg

http://i2.photobucket.com/albums/y17...4E93C31EC3.jpg

http://i2.photobucket.com/albums/y17...4E57786028.jpg

Just read the whole thread from the beginning, i have to say Lee, im loving how the car has turned out, what a fantastic job you have done.
You should be pleased with your accomplishment, and its good to see you getting the fruits from your labour now!
Well done mate :thumb: :notworthy :notworthy

Don't know what to say .... Thanks mate loved every minute of it

Mallory booked and paid for looks a nice track can't wait till the 13th oct

second set of rotas picked up today, new wet tyres put on ready for mallory park just a few checks to do pick up new trailer on the 6th and good to go

http://i2.photobucket.com/albums/y17...3C54D053A7.jpg

New tow horse bought , not the best looking van but has a good engine and box and tows very well, just had it cleaned in cab area with an engine steam clean from the very helpful polish valeters down the road .

Before the engine had been steam cleaned

http://i2.photobucket.com/albums/y17...ABA40F000E.jpg

And after

http://i2.photobucket.com/albums/y17...ABAD3CCCEE.jpg

http://i2.photobucket.com/albums/y17...ABB876AF4D.jpg

http://i2.photobucket.com/albums/y17...AB9EE89094.jpg

Trailer to pick up tommorow check it over before I hand over my hard earned then all ready for Mallory next saturday .

My own trailer at last got it for a good price spent the day sussing out wiring problem only had indicators now everything works.

Had to order the led type stop tail as these are a sealed unit and won't end up like the ones already on (lamps rusted in holder) new led fogs ordered too and new side reflectors quick lick of paint (weather permitting ) tommorow wheels gone in for shot blasting then spray new tyres brakes to service all before next sat I do put myself under pressure!!

Glad you are keeping the car Lee :thumb:
After all the hard work you have put in.

Cheers Steve , had a moment of what shall I do , but sorted things out yeh too much time and effort has gone into it plus really looking forward to Mallory next saturday , back at Blyton on the 11th nov then may put the car away till spring next year but at least now I'm set up with van and trailer of my own do not relying on others can do what I please .

The pic above was as I picked it up and now after a little spruce up it took me nearly 4 hrs to prep then paint turned out 100% better I think

http://i2.photobucket.com/albums/y17...1D3125CB07.jpg

Looks much better!

And the lights work now !

Took the trailer wheels to work and asked a very nice man if he would shot blast them for me which he did wasn't expecting them back till tommorow but he did them straight away (i owe him a few beers a the Xmas party)!!!

http://i2.photobucket.com/albums/y17...780D71430B.jpg

All primed front and rear ready for silver paint tommorow then lacquer

http://i2.photobucket.com/albums/y17...781A8BAAFD.jpg

You don't hang about do you!

ive learnt in life no-one is going to do it for you so you need to succeed yourself ,i set my self little goals and try to achieve every day ,whether it be at work or play plus it stops me from going to the pub and waisting my hard earned by pissing it up the wall.

doing something you dont enjoy time drags but doing something you enjoy time fly's by !!

and i am a practical person just love it really keeps me busy mate