ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Member's Gallery (https://www.scoobynet.com/members-gallery-5/)
-   -   MY 2011 Saloon / Hatch, show yourselves! Pics & chat (https://www.scoobynet.com/members-gallery-5/900070-my-2011-saloon-hatch-show-yourselves-pics-and-chat.html)

abre 24 December 2013 08:22 AM

Mint may be an issue, I have 2 sets 15 months old and all beginning to blister on back of spokes even after spending hours polishing & sealing them before driving on them... Dealer putting warranty claim in!
The paint on them is s**t.
BTW they are made by Enkei, have seen quite a few sets for sale on here & fleabay... Good luck in your search

Have a good one everybody

salsa-king 24 December 2013 08:30 AM

At the right price it'll be worth spending to get them refurbished then you could have them any colour you want knowing they're fully powder coated properly.

LUCKO 24 December 2013 08:42 AM

very true salsa

how much are they new, i suppose i dont want to know :eek:

salsa-king 24 December 2013 10:33 AM

GT1's

http://www.ebay.co.uk/sch/i.html?_tr...at=0&_from=R40


GT2's
http://www.ebay.co.uk/sch/i.html?_od...lloys&_sacat=0


In Nottm I've paid £240 to have my 17" STi alloys powder coated Orange ;)
https://farm4.staticflickr.com/3667/...d3947fa5_c.jpg

terzoscooby 24 December 2013 11:02 AM

The Standard fit dunlops don't help either as they do not protect the rims. You cannot even put them on the floor without them scratching. I would recommend going onto Goodyear F1s when you get a set as rim protector stands outboard of the rim so saves on curbing. It also transformed my handling.

salsa-king 24 December 2013 12:15 PM

Or get some Rota's. They look cool on the hatch and saloon.

abre 24 December 2013 03:09 PM


Originally Posted by terzoscooby (Post 11301736)
The Standard fit dunlops don't help either as they do not protect the rims. You cannot even put them on the floor without them scratching. I would recommend going onto Goodyear F1s when you get a set as rim protector stands outboard of the rim so saves on curbing. It also transformed my handling.

Any other views on good tyres, going to be changing my Dunlops soon. Looking for something with good summer performance (that'd be wet & dry then :D ) and a little quieter than the standard fit :eek: F1s get good reports but wondered what the rest of you are using?

Have a great Christmas
Andrew

salsa-king 24 December 2013 03:16 PM

Vredestein Tyres get a good review, also good on price as well.

http://www.camskill.co.uk/m61b0s0p0/...yres_-_18_inch

Abx 24 December 2013 11:02 PM

Vreds all the way, paid about £119 a corner for 18's iirc, good all round tyre that I will certainly buy again!

bigh221 31 December 2013 03:37 PM

Pick up my Saloon on Friday :-)

http://i330.photobucket.com/albums/l...I/IMG_1430.jpg
http://i330.photobucket.com/albums/l...I/IMG_1432.jpg
http://i330.photobucket.com/albums/l...I/IMG_1431.jpg
http://i330.photobucket.com/albums/l...I/IMG_1433.jpg
http://i330.photobucket.com/albums/l...I/IMG_1426.jpg
For HT Auto's how much for the subtle boot lip spoiler sprayed up and fitted please? and best exhaust for an upgrade?
Best regards and happy new year to all
Neil

Don Clark 31 December 2013 03:57 PM


Originally Posted by bigh221 (Post 11308328)
Pick up my Saloon on Friday :-)

For HT Auto's how much for the subtle boot lip spoiler sprayed up and fitted please? and best exhaust for an upgrade?
Best regards and happy new year to all
Neil


AFAIK
Mark doesn't do any spraying anymore as he's too busy manufacturing :D

Littleted 31 December 2013 03:59 PM

looks like my old one :) ML60RAU

Wonder who has that now

ahh so parkway bought it

http://www.parkwayspecialistcars.co....0-bhp-upgrade/

who got it ?

bigh221 31 December 2013 04:24 PM

Littleted,

Reg starts YR10, unless the reg you quoted was a private one?

Regards
Neil

bigh221 31 December 2013 04:24 PM


Originally Posted by Don Clark (Post 11308344)
AFAIK
Mark doesn't do any spraying anymore as he's too busy manufacturing :D

Ok mate cheers, will find somewhere local in Hampshire

Littleted 31 December 2013 05:01 PM


Originally Posted by bigh221 (Post 11308372)
Littleted,

Reg starts YR10, unless the reg you quoted was a private one?

Regards
Neil


No it wasn't mine, although the link I posted was mine, looks like Psrkway got that also..

like the coments about mine pristine example LOL :)

bigh221 31 December 2013 05:26 PM


Originally Posted by Littleted (Post 11308419)
No it wasn't mine, although the link I posted was mine, looks like Psrkway got that also..

like the coments about mine pristine example LOL :)

Why? Is it not pristine

Littleted 31 December 2013 05:44 PM

it was looked after. I suppose when you have the car for 3 years you know where to look

bigh221 31 December 2013 06:11 PM

Anything particular too look out for on these models, mine is standard ?

Littleted 31 December 2013 06:45 PM

check tyres, if there still original dunlops, id done 30k in mine and they were ready for a change Tracked on the inside, they also make noise if Tracked that sounds like bearing going, Run hand round inside of tyre to see if its stepped

buy yaself a Pioneer headunit they sound awesome in the car, compared to normal,

Also if its standard why does it have ProR sticker on ? they give these out when you get the remap 320 or 340 by the looks of your exhaust, its standard so maybe 320R hiding in there ?

terzoscooby 31 December 2013 06:56 PM

Check boot for rust. There is a warrantee upgrade on the number plate light fitting. Only done if rust starts on boot. Get 4 wheel alignment done to.

bigh221 31 December 2013 07:05 PM


Originally Posted by Littleted (Post 11308545)
check tyres, if there still original dunlops, id done 30k in mine and they were ready for a change Tracked on the inside, they also make noise if Tracked that sounds like bearing going, Run hand round inside of tyre to see if its stepped

buy yaself a Pioneer headunit they sound awesome in the car, compared to normal,

Also if its standard why does it have ProR sticker on ? they give these out when you get the remap 320 or 340 by the looks of your exhaust, its standard so maybe 320R hiding in there ?

Car is ex demo so maybe the dealer plonked the PRO-R sticker on, dealer I'm buying from says there is no paperwork supporting an upgrade, I'm sure he would raise the price if there was.

Cheers for the tips all :)

Don Clark 31 December 2013 08:04 PM


Originally Posted by bigh221 (Post 11308575)
Car is ex demo so maybe the dealer plonked the PRO-R sticker on, dealer I'm buying from says there is no paperwork supporting an upgrade, I'm sure he would raise the price if there was.

Cheers for the tips all :)

Check the bottom of the "B" pillars, where the VIN plate is for an additional sticker for 320R or 340R upgrades.

bigh221 31 December 2013 08:15 PM


Originally Posted by Don Clark (Post 11308645)
Check the bottom of the "B" pillars, where the VIN plate is for an additional sticker for 320R or 340R upgrades.

Ok will do that cheers

Abx 01 January 2014 11:19 AM

Mine is a 320r and also had no paperwork to support the upgrade or any stickers, I spoke with IM to confirm and they sent me out a cert for my piece of mind.

bigh221 01 January 2014 11:30 AM


Originally Posted by Abx (Post 11308974)
Mine is a 320r and also had no paperwork to support the upgrade or any stickers, I spoke with IM to confirm and they sent me out a cert for my piece of mind.

Thanks for that abx, will check with IM when I pick it up Friday, anyone else fitted the subtle boot lip spoiler? Rough cost for color coding please :-)

T5NYW 01 January 2014 02:22 PM

IIRC The only sticker they put on is the 97ron sticker on the inside of fuel flap.

Tony

Don Clark 01 January 2014 04:47 PM


Originally Posted by Abx (Post 11308974)
Mine is a 320r and also had no paperwork to support the upgrade or any stickers, I spoke with IM to confirm and they sent me out a cert for my piece of mind.


Originally Posted by T5NYW (Post 11309177)
IIRC The only sticker they put on is the 97ron sticker on the inside of fuel flap.

Tony

Originally all you got was a fuel flap sticker and a PPP style certificate.

BUT, Tony will probably remember now :D that on our visit to Unity in Peterborough the WRX STi in the workshop sported a black on silver VIN style sticker as well, on thebase of the B pillar ............ can't remember if it was 340R or 320R tho'

LUCKO 02 January 2014 03:40 AM

bigh221

If you plan on upgrading the standard wheels on your new car I would be interested in the standard ones

Long shot but thought I'd ask

bigh221 02 January 2014 08:41 AM


Originally Posted by LUCKO (Post 11309833)
bigh221

If you plan on upgrading the standard wheels on your new car I would be interested in the standard ones

Long shot but thought I'd ask

No worries LUCKO, if I change will keep you in mind :-)

impreza80 04 January 2014 11:30 AM

sti saloon
 
Hi, I'm a scooby net newly.
I have a rear end damaged 2010 sti saloon I need some parts, drivers side rear light some trims and some rear suspension parts. Anyone know anyone in the UK that might have these parts as I am struggling?
Any help would be appreciated.
Many thanks


All times are GMT +1. The time now is 06:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands