Hi Shaun,

The new Billet wheels are no bigger than the wheels they replace, some are actually smaller ! :eek:

They are 33% lighter which helps spool up and response.

The new aerodynamic blade design helps them flow more air which makes more power at the same boost levels as their non billet brothers, so win win situation :thumb:

Cheers
Kev

Hi Kev,
Thanks for the response.

I have done a bit of research on it now. :)

will keep a look out for the 35 results if i can get a billet 35 with .82 housing to spool as quick as my standard 35 with .63 think i will be having one.More power and same spool yes please

Hi,
Kev can you please clarify if the sc36 results are with billet or non billet internals? If it is non billet what is expected of the billet version?

Thanks

Hi,
the one tested is the non billet version, we wont receive the billet 36 untill late Jan.

We will have to wait and see what it performs like but if the other billet results are anything to go by it should be good :thumb:

cheers
Kev

Sexy looking turbos these!

Hi,
they have arrived :thumb:

Attachment 53199

GT35/82 XTR billet

Testing time :D

Cheers
Kev

I wonder who makes that compressor cover?

I guess this means I'll be seeing you soon then Kev!

Covers are made by that bloke off "Hawaii five 0"...... book`em Danno.

???

http://i694.photobucket.com/albums/v...0_20080117.jpg


The Man Him self Steve McGarrett! :D

What car will you be testing the 35/82 xtr billet on kev/adam ?,very interested in one for mine.

Oooh that is pretty :)

Hi,
we are going to test the turbo on a back to back basis using a car owned by a customer of ours, to be fair not sure of the exact engine spec but I am sure he will post it up soon :D

The plan is to run the car on our dyno with its standard GT35R, adjust the map if it needs adjusting and get an accurate figure to work from, we will then remove the turbo, replace it with the billet version and go again. :thumb:

Our customer has invited Paul from Zen to map the car on our dyno, this will give us independent results, hopefully good ones :luxhello:

Thanks for your interest.

cheers
Kev

And here's the spec boys and girls ;)

https://www.scoobynet.com/garage/199...MadHammer.html

Wow monster turbo

Cool,kev could you let me know the date if possible i would like to pop up and see this,kev is mine the 82 housing or the .63 matey ?.

Hurry up and tell me how good this is as I may not bother trying to sell my ecu :D



Kev how good are the billet range as compared to the ones say fitted to mikeys old car???

Always trying to catch me up mate ;)

Is that right, I'm only 1mph behind your topspeed run with less power ;) My 1/4's are crap as I admit I can't change gear but top speed is an idea on the cars power ;)

bit off topic but what 1/4's are you both running ?,i did an 11.5 @ 126mph,no launch or anti lag and that was with low boost 1.6 bar. in a newage.

Your doing better than me as I can only manage 11.9 @ 127mph and thats been done a few times :(

10.55 backed up with 10.56 with poor 60fts @ 1.75+ !

YouTube - Clive Fulcher 10.55 Scooby shootout Scooby Sprint
YouTube - Clive Fulcher 10.56 second run Scooby shootout Scooby Sprint

Steve, agreed you were not far behind mate but I backed out of it early ;) I will give you the bigger balls award if you take it over 170 ! Sy did 178 taking it to the absolute limit of the runway.

Hi Steve,

if you look back through this thread you will see the printouts showing the difference on the pink car, reg M79 YWE :thumb:

It is amazing what the billet wheel does :D

Cheers
Kev

has the billet sc46 come in yet and if so any idea of when you will be testing it chhers dave

Hi,

the first SC46 billet turbo's will be with us late next week :thumb:

Testing will begin straight away :D

Cheers
Kev

Hi,
we are testing with Clive and Paul Thurs 4th Feb.

I dont know who you are so cannot comment on the exhaust housing on your turbo, :confused: sorry.

Cheers
Kev

Adam/Kev, reading through this thread has given me renewed 'hope' for my turbo options. I have a Zen built 2.0 with STi 3/4 pistons and STi v.9 rods, ACL bearings, etc.... BUT... still has the v.1 WRX hydro heads :(.

My motor should be good for this side of 400bhp and the main players WERE a 20g or 18g. But I'm not too sold on their inconsistant top end performance/figures.

Would the SC42, or even the SC46, outperform either in spool and top end? Would the billet SC46 spool the same or better than the non-billet SC42 - indeed is there going to be a SC42 billet anytime soon, too?! Also, how would the FP HTA68 fair against any of the SC42/46 turbos?

Basically, my brief - if possible, on my soft cams - is to try to attain 400 (or as close as) but with as early spool times as poss (don't we all?)... and it looks like a SC46 billet or SC42 could do it!...

Any help/advice is appreciated

...I'm getting ahead of myself re the SC46 billet - will have to wait till next week. :D

Hi,

I was going to mention that :D

The spool on the billet 46 will hopefully be better than the SC42 with a much higher top end than the standard SC46, if this is the case we will cease to do the SC42 :thumb:

The SC46 runs a 46 llb wheel, hence its name, the billet one will run a 49 llb wheel but the wheel will be 33% lighter therefore spool should be improved along with top end performance, win win we hope. :eek:

Hope that kind of answers your questions

cheers
Kev