All clear of fuel lines now

http://i2.photobucket.com/albums/y17...s/fuelines.jpg

Started on the rear doors today to cut away excess weight ,and came up with a great idea to support the glass in place pics show this.
I re installed the bracket for the window slider, this is the one that carries the wheel mounted on the end of the window,i then drilled a 6mm hole after getting final position of glass so when i placed a bolt in the hole it stopped the window (wheel) from sliding down and bingo perfect fit so will be doing this to the other side tommorow.

http://i2.photobucket.com/albums/y17...oorbracket.jpg

http://i2.photobucket.com/albums/y17...s/reardoor.jpg

Removed the last rear door this morning to cut out finally got the window tint off with a heat gun ,it helped a bit then thinners to wipe away residue

http://i2.photobucket.com/albums/y17...windowtint.jpg

I then set too on the long awaited bulkhead and parcel shelf, firstly made a template out of cardboard then copied onto 2mm black plastic and cut out, nice fit really !

http://i2.photobucket.com/albums/y17...s/bulkhead.jpg

http://i2.photobucket.com/albums/y17...arcelshelf.jpg

I will fasten these in place when interior has been painted should be getting a primer coat on this weekend i hope if Dave's up for it (fingers crossed) !

sure am baz,be there after work :thumb:

What today or sat il bell you mate ?

Thanks your a star !

Cars going in for paint today removing all the doors and got 3 hrs masking up to do before dave comes round armed with his compressor and spray gun should be a good result ,white primer today then final coates later il post pics of the day later.

Nice one early bird, keep up the good work ;)

He do barrow jobs? might need someone to paint my project pug.

http://smg.photobucket.com/albums/v1...Pug%20Project/

Well it all started about 8am for me my job was to remove the doors and mask up ready for primer today ,so no overspray would affect the exterior paint.

Never masked a car before but once i got into it it was quite theraputic !

Anyhow il let the pictures do the talking just want to say a big thank you to dave for coming round since being up since 4am and already done a shift ,to then come to the workshop and do some more for me thanks again another top job just cant wait untill tuesday now to get the final paint on.

http://i2.photobucket.com/albums/y17/leecalcars/a1.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a3.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a5.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a2.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a4.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a6.jpg

It was then time to take the car to another workshop to blow out all the dust and panel wipe the areas to be sprayed.

http://i2.photobucket.com/albums/y17/leecalcars/a7.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a8.jpg

Then with full coat of primer tried to take a few shots to get full coverage im well pleased with it ,Dave you should do this for a living made it look easy.

http://i2.photobucket.com/albums/y17/leecalcars/a17.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a18.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a19.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a20.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a21.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a22.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a23.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a9.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a10.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a11.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a12.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a13.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a14.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a15.jpg

http://i2.photobucket.com/albums/y17/leecalcars/a16.jpg

Had a great day progress atlast looking forward now to finishing paint then move on to the next stage.

Final coates of 2 pack brilliant White going on on Tuesday , then remove all masking and reinstate all door rubbers and doors maybe even get the glass back in till I can get hold of some lexan windows .

Looks fantastic fella. Seeing pics like that makes me want to do my inside.
Keep up the great work.

Thanks, There's a young lad down the garage he has toyota starlet all interior has been taken out and painted black looks mint with his rear brace and harnesses if you dont mind loosing the back seats then go for it.

Car's in for final paint tommorow on the interior , more pics to post !

Well i must say a big thank you to my mate dave yet again he has excelled himself in the progression on my project .

A quick rubdown of primer then a clean down with panel wipe before blowing away any last dust before paint and what an outcome you couldnt get this finish from a tin !

http://i2.photobucket.com/albums/y17/leecalcars/sp0.jpg

http://i2.photobucket.com/albums/y17/leecalcars/sp1.jpg

Then onto painting the swaet was pouring of him ....OH bless !

http://i2.photobucket.com/albums/y17/leecalcars/sp2.jpg

http://i2.photobucket.com/albums/y17/leecalcars/sp3.jpg

http://i2.photobucket.com/albums/y17/leecalcars/sp4.jpg

http://i2.photobucket.com/albums/y17/leecalcars/sp5.jpg

http://i2.photobucket.com/albums/y17/leecalcars/sp7.jpg

http://i2.photobucket.com/albums/y17/leecalcars/sp8.jpg

http://i2.photobucket.com/albums/y17/leecalcars/sp9.jpg

Then we removed the masking and panel wiped any overspray not that theres was much .

http://i2.photobucket.com/albums/y17...lcars/sp10.jpg

http://i2.photobucket.com/albums/y17...lcars/sp11.jpg

http://i2.photobucket.com/albums/y17...lcars/sp12.jpg

http://i2.photobucket.com/albums/y17...lcars/sp13.jpg

http://i2.photobucket.com/albums/y17...lcars/sp14.jpg

http://i2.photobucket.com/albums/y17...lcars/sp16.jpg

http://i2.photobucket.com/albums/y17...lcars/sp17.jpg

http://i2.photobucket.com/albums/y17...lcars/sp18.jpg

http://i2.photobucket.com/albums/y17...lcars/sp19.jpg

looks good mate, but white is the heaviest colour lol, take it the coilys are staying with you then ?

Yes mate worked out good in the end fly out to spain for 5mths job end of july ......sorry il see how they are on my first outing if im not happy with them then you have first refusal.

love it... great wk mate ;)

looking great mate. Good lad dave is, top bloke :notworthy


cage looks the dogs bollocks mate too, done a cracking job

Cheers Baz !

When you popping down for a look ?

A few small jobs out the way riveted parcel shelf cover in today so no glare on the rear screen with the white paint.

http://i2.photobucket.com/albums/y17...celshelf-1.jpg

Spoiler going on tommorow it's huge !

Back on with the door rubbers and then refit the doors if I have time then swirlpot and fuel pump will be fitted ready to measure AN fittings to order from areoquipe .

330mm k sport front brake kit going on next week as I'm not too busy with work so can get a few jobs done to push it along a bit.

Il post pics tommorow of progress (love Saturdays down the garage).

Firstly i masked off boot ready for marking out fixing points for spoiler brackets 8 holes had to be drilled to fasten them ,i used 6mm s/s bolts so as never to rust.

http://i2.photobucket.com/albums/y17/leecalcars/ff1.jpg

The spoiler had very poor mounting points so i used a rivet cup with 8mm thread as extra support firstly drilling out to 11mm to crimp lug in place.

http://i2.photobucket.com/albums/y17/leecalcars/ff2.jpg

http://i2.photobucket.com/albums/y17/leecalcars/ff3.jpg

8mm bolts have made it very sturdy job done

http://i2.photobucket.com/albums/y17...lcars/ff10.jpg

http://i2.photobucket.com/albums/y17/leecalcars/ff5.jpg

http://i2.photobucket.com/albums/y17/leecalcars/ff6.jpg

http://i2.photobucket.com/albums/y17/leecalcars/ff7.jpg

http://i2.photobucket.com/albums/y17...lcars/ff17.jpg

Had time to refit the doors and clean the glass

http://i2.photobucket.com/albums/y17...lcars/ff12.jpg

http://i2.photobucket.com/albums/y17...lcars/ff11.jpg

I had to cut some of the door trim plastics so they would fit behind cage

http://i2.photobucket.com/albums/y17...lcars/ff13.jpg

http://i2.photobucket.com/albums/y17...lcars/ff16.jpg

http://i2.photobucket.com/albums/y17...lcars/ff18.jpg

that rear wing is awesome!

Wasnt sure at first when i bought it but now fitted i like it !

Went up and saw this last week - it's looking good.

That rear spoiler makes mine look tiny!

Maybe see you at Cadwell Monday night?

Hello Dan , il ring you in the week for a few bits !:thumb:

Hi mate...love the project
i saw this when i went to pick mine up from john(the mica blue classic with clutch problems:p)
This is the way i want to go with mine so might fancy a chat next time im down there
Cheers
Chris:thumb:

yes mate no problem, some clutch you bought there it must have moved about 10mm on spinning the shaft where did you buy that from ?

Yeh just pop down im there most days .:thumb:

It was the first and last time i order off ebay!!!!!...and yea ill pop over when im next there mate