AP 4 pot calipers & Prodrive WRC 305mm discs & bells to fit classic - cheap
#1
\m/ ^_^ \m/
Thread Starter
AP 4 pot calipers & Prodrive WRC 305mm discs & bells to fit classic - cheap
Right, this is one for the DIYers amongst us i got the calipers from an MGF cup car so the mounting holes were in the wrong place, i've done all the hard work and had brackets made up to mount them to the impreza hubs but you need to take an grinder to the hub to make some clearance for the caliper not to foul. They also come with a like new set of Yellow stuff EBC pads.
The discs & bells came from Prodrive themselves but i stupidly bought 2 of the same side discs so one will be the wrong way round on the car but i've done trackdays with them and they've worked superbly so it's not really a problem unless you intend to do 30 laps at full racing speed, then you might start to have a problem with cooling i've had a spacer ring made that you can see in the pictures to get the discs to line up with the calipers and a ring made to get them to sit on the hubs.
You will need to run a 5mm spacer on the front at the very least for them to clear the spokes, i had 46mm offset 16" Volks TE37 rims and they just cleared by a couple of mm's (see photo) I'm not after a massive amount so open to offers for them as it involves work that some people might not want to go through to get them to fit, a weekend's work at most
The discs & bells came from Prodrive themselves but i stupidly bought 2 of the same side discs so one will be the wrong way round on the car but i've done trackdays with them and they've worked superbly so it's not really a problem unless you intend to do 30 laps at full racing speed, then you might start to have a problem with cooling i've had a spacer ring made that you can see in the pictures to get the discs to line up with the calipers and a ring made to get them to sit on the hubs.
You will need to run a 5mm spacer on the front at the very least for them to clear the spokes, i had 46mm offset 16" Volks TE37 rims and they just cleared by a couple of mm's (see photo) I'm not after a massive amount so open to offers for them as it involves work that some people might not want to go through to get them to fit, a weekend's work at most
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Matt_182
Wheels, Tyres & Brakes
19
07 October 2015 01:05 PM
piehole1983
Wheels, Tyres & Brakes
5
09 September 2015 06:34 PM