Selling up sale
20 July 2010, 02:37 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 1999
Posts: 7,957
Likes: 0
Received 0 Likes
on
0 Posts
Selling up sale
On behalf of a friend:
Selling up pretty much everything you could want for a high power build.
The shell has now gone, so the bits are definitely to be sold.
Will compile a full list soon, but to get the ball rolling, feel free to pm if there's anything you specifically need.
We have.
1 x set of STi 3 heads, gas flowed and ported by SMG Tuning with DH22 (ish) profile cams.
1 x set of AVCS heads, gas flowed and ported by SMG Tuning with Spec C cams.
1 x Life Racing F88 ECU.
1 x EJ22T block with Wiseco pistons, Crower rods, EJ25 crank, bearings, ingredients to make a high power 2.35. All new. Needs building obviously!
1 x Type RA gearbox with DCCD and quaife front diff (not sure of final drive).
1 x Type RA gearbox stock centre, and open rear diff, unknown front diff.
1 x Greddy/Misubishi/Garret hybrid, 360 degree thrust bearing, complete with custom pipework, inc. 4/2/1 headers and trhee port solenoid. Freshly rebuilt.
1 x BNIB PPG 5MT gear set, straight cut first and second, semi third and force and stock helical fifth.
various brand new engine internals.
1 x EJ20 CDB with good crank and STI forged pistons, needs to be stripped.
Exedy twin plate clutch BNIB (Hiper).
Defi gauges, Boost, OP, OT, iirc. 60mm, green, with good pod for classic, all new (later type controller).
pm if there's anything specific you are interested in. I only know for sure that there is no intercooler for sale.
Selling up pretty much everything you could want for a high power build.
The shell has now gone, so the bits are definitely to be sold.
Will compile a full list soon, but to get the ball rolling, feel free to pm if there's anything you specifically need.
We have.
1 x set of STi 3 heads, gas flowed and ported by SMG Tuning with DH22 (ish) profile cams.
1 x set of AVCS heads, gas flowed and ported by SMG Tuning with Spec C cams.
1 x Life Racing F88 ECU.
1 x EJ22T block with Wiseco pistons, Crower rods, EJ25 crank, bearings, ingredients to make a high power 2.35. All new. Needs building obviously!
1 x Type RA gearbox with DCCD and quaife front diff (not sure of final drive).
1 x Type RA gearbox stock centre, and open rear diff, unknown front diff.
1 x Greddy/Misubishi/Garret hybrid, 360 degree thrust bearing, complete with custom pipework, inc. 4/2/1 headers and trhee port solenoid. Freshly rebuilt.
1 x BNIB PPG 5MT gear set, straight cut first and second, semi third and force and stock helical fifth.
various brand new engine internals.
1 x EJ20 CDB with good crank and STI forged pistons, needs to be stripped.
Exedy twin plate clutch BNIB (Hiper).
Defi gauges, Boost, OP, OT, iirc. 60mm, green, with good pod for classic, all new (later type controller).
pm if there's anything specific you are interested in. I only know for sure that there is no intercooler for sale.
Last edited by Adam M; 20 July 2010 at 02:57 PM.
20 July 2010, 06:14 PM
#3
Scooby Regular
iTrader: (26)
Join Date: Dec 2008
Location: london
Posts: 2,635
Likes: 0
Received 0 Likes
on
0 Posts
1 x EJ22T block with Wiseco pistons, Crower rods, EJ25 crank, bearings, ingredients to make a high power 2.35. All new. Needs building obviously!
Exedy twin plate clutch BNIB (Hiper).
1 x set of AVCS heads, gas flowed and ported by SMG Tuning with Spec C cams.
PM me with prices
Exedy twin plate clutch BNIB (Hiper).
1 x set of AVCS heads, gas flowed and ported by SMG Tuning with Spec C cams.
PM me with prices
20 July 2010, 07:57 PM
#4
Scooby Regular
Thread Starter
Join Date: Aug 1999
Posts: 7,957
Likes: 0
Received 0 Likes
on
0 Posts
all PMs replied to.
Am sorry to say the typical answer is please contact the seller direct.
I have provided his email in the pm, but he's reluctant to post it blindly.
When prices are decided they will be posted to the thread. In the meantime, this "teaser" was meant to be a heads up as to what he is selling.
Hope that's all ok.
Adam
Am sorry to say the typical answer is please contact the seller direct.
I have provided his email in the pm, but he's reluctant to post it blindly.
When prices are decided they will be posted to the thread. In the meantime, this "teaser" was meant to be a heads up as to what he is selling.
Hope that's all ok.
Adam
Trending Topics
21 July 2010, 09:23 PM
#10
Scooby Regular
iTrader: (15)
Join Date: Jul 2009
Location: Somewhere halfway between heaven and hell, some call it earth!
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
1 x EJ22T block with Wiseco pistons, Crower rods, EJ25 crank, bearings, ingredients to make a high power 2.35. All new. Needs building obviously!
Exedy twin plate clutch BNIB (Hiper).
1 x set of AVCS heads, gas flowed and ported by SMG Tuning with Spec C cams.
Second that for a PM with total price please
Exedy twin plate clutch BNIB (Hiper).
1 x set of AVCS heads, gas flowed and ported by SMG Tuning with Spec C cams.
Second that for a PM with total price please
27 July 2010, 11:51 AM
#17
Scooby Regular
Thread Starter
Join Date: Aug 1999
Posts: 7,957
Likes: 0
Received 0 Likes
on
0 Posts
Christian, seriously, shut up! these are genuine people genuinely annoyed by Moray's failure to respond.
It's not a joke to them so quit jumping on the bandwagon.
Am going to ask permission to post Moray's email address, then I wash my hands of this!
It's not a joke to them so quit jumping on the bandwagon.
Am going to ask permission to post Moray's email address, then I wash my hands of this!
27 July 2010, 01:06 PM
#18
Scooby Senior
Join Date: Jun 1999
Posts: 3,410
Likes: 0
Received 0 Likes
on
0 Posts
Hi Guys,
My friend Adam kindly decided to place the advert for the car parts as soon as my RA was sold, unfortunately, however, the timing wasn't ideal and has caught me in an extremely busy month.
The parts are, indeed, for sale. At the moment I have no definite pricing on most of the items as I have not had time yet to ferret out what they all cost me as I have been extremely busy for the past few weeks.
I hope to get enough time to get some prices listed within the next couple of days. I apologise for not having replied to your emails sooner, I wanted to have something useful to tell you before replying, unfortunately the week just kept getting more busy for me.
To save Adam any further grief, please contact me directly on moraymackenzie (at) gmail (dot) com.
Cheers,
Moray
My friend Adam kindly decided to place the advert for the car parts as soon as my RA was sold, unfortunately, however, the timing wasn't ideal and has caught me in an extremely busy month.
The parts are, indeed, for sale. At the moment I have no definite pricing on most of the items as I have not had time yet to ferret out what they all cost me as I have been extremely busy for the past few weeks.
I hope to get enough time to get some prices listed within the next couple of days. I apologise for not having replied to your emails sooner, I wanted to have something useful to tell you before replying, unfortunately the week just kept getting more busy for me.
To save Adam any further grief, please contact me directly on moraymackenzie (at) gmail (dot) com.
Cheers,
Moray
11 August 2010, 12:48 PM
#25
Scooby Senior
Join Date: Jun 1999
Posts: 3,410
Likes: 0
Received 0 Likes
on
0 Posts
Prices for some of the kit:
PPG Synchro gearkit for 5MT, gears 1-4. 1-2 Straight cut, 3-4 helical, BNIB, £2300.
Exedy Hyper Twin Plate Clutch and flywheel kit for 5MT, BNIB, £1150.
EJ20 CDB with STI forged pistons and good crank, needs stripping and cleaning, £500
STI 3 heads with warm cams, SMG ported, Not been run since porting, £1100
More prices to follow.
PPG Synchro gearkit for 5MT, gears 1-4. 1-2 Straight cut, 3-4 helical, BNIB, £2300.
Exedy Hyper Twin Plate Clutch and flywheel kit for 5MT, BNIB, £1150.
EJ20 CDB with STI forged pistons and good crank, needs stripping and cleaning, £500
STI 3 heads with warm cams, SMG ported, Not been run since porting, £1100
More prices to follow.
Last edited by MorayMackenzie; 11 August 2010 at 12:58 PM. Reason: additional item
Thread
Thread Starter
Forum
Replies
Last Post
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
trapper2013
ScoobyNet General
6
30 October 2015 03:10 PM
