Throwing in the towel sale
#1
Throwing in the towel sale
I've thought long and hard about this and if I am honest I'm still not 100% sure I'm doing the right thing. However, I got made redundant in feb and with employemnt not forthcoming I cant see the car getting finished anytime soon and really cant justify all that cash tied up in what is currently a driveway ornament. Plus I'm sick and tired of driving a £400 peice of shyte so I would like to buy a newer standard Impreza (would ideally like a bog stock Hawkeye STI ).
I'm going to list it all and if I reach the overall figure I want for everything then I'll sell up. If you're interested put your names down with the parts your interested in. Prices are negotiable but dont expect to get them if you're taking the pi55!!
Rolling Shell Complete with doors glass bonnet boot wings all freshly painted (underneath too) £2,500
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150
Just to make it clear i'm testing the water with this. The majority of this gets sold or none of it does. So put your names down folks.
Cheers
Daz
I'm going to list it all and if I reach the overall figure I want for everything then I'll sell up. If you're interested put your names down with the parts your interested in. Prices are negotiable but dont expect to get them if you're taking the pi55!!
Rolling Shell Complete with doors glass bonnet boot wings all freshly painted (underneath too) £2,500
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150
Just to make it clear i'm testing the water with this. The majority of this gets sold or none of it does. So put your names down folks.
Cheers
Daz
#5
Scooby Regular
iTrader: (9)
Join Date: Apr 2010
Location: WIGAN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
Rolling Shell Complete with doors glass bonnet boot wings all freshly painted (underneath too) £2,500
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40 NEILB1 PLEASE
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40 NEILB1 PLEASE
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150
Last edited by NEILB1; 13 August 2010 at 03:32 PM.
Trending Topics
#11
Scooby Regular
iTrader: (12)
Join Date: Jan 2009
Location: Co. Durham
Posts: 2,291
Likes: 0
Received 0 Likes
on
0 Posts
I would like these please
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50 (if joz doesnt want them)
If you could do a deal for them posted that would be great
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50 (if joz doesnt want them)
If you could do a deal for them posted that would be great
#13
Scooby Regular
iTrader: (10)
Rolling Shell Complete with doors glass bonnet boot wings all freshly painted (underneath too) £2,500
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40 NEILB1 PLEASE
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500 GRAHAMC - PMd for more info
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150 GRAHAMC - PMd for more info
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40 NEILB1 PLEASE
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500 GRAHAMC - PMd for more info
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150 GRAHAMC - PMd for more info
#14
Scooby Newbie
iTrader: (2)
Join Date: Mar 2010
Location: Finland
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Rolling Shell Complete with doors glass bonnet boot wings all freshly painted (underneath too) £2,500
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40
Safety devices bolt in roll cage 450 yhPM about this
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40
Safety devices bolt in roll cage 450 yhPM about this
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150
#22
Scooby Regular
iTrader: (24)
Join Date: Oct 2009
Location: Aberdeen
Posts: 2,604
Likes: 0
Received 0 Likes
on
0 Posts
Rolling Shell Complete with doors glass bonnet boot wings all freshly painted (underneath too) £2,500
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80 SteveMoir Please if it fits a blob sti
Swirl Pot -6 fittings 40
walbro 40 NEILB1 PLEASE
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500 GRAHAMC - PMd for more info
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150 GRAHAMC - PMd for more info
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80 SteveMoir Please if it fits a blob sti
Swirl Pot -6 fittings 40
walbro 40 NEILB1 PLEASE
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500 GRAHAMC - PMd for more info
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150 GRAHAMC - PMd for more info
Last edited by stevemoir; 14 August 2010 at 04:44 PM. Reason: red