dazdavies

iTrader: (22)

I've thought long and hard about this and if I am honest I'm still not 100% sure I'm doing the right thing. However, I got made redundant in feb and with employemnt not forthcoming I cant see the car getting finished anytime soon and really cant justify all that cash tied up in what is currently a driveway ornament. Plus I'm sick and tired of driving a £400 peice of shyte so I would like to buy a newer standard Impreza (would ideally like a bog stock Hawkeye STI ).

I'm going to list it all and if I reach the overall figure I want for everything then I'll sell up. If you're interested put your names down with the parts your interested in. Prices are negotiable but dont expect to get them if you're taking the pi55!!


Rolling Shell Complete with doors glass bonnet boot wings all freshly painted (underneath too) £2,500
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150

Just to make it clear i'm testing the water with this. The majority of this gets sold or none of it does. So put your names down folks.

Cheers

Daz

joz8968

iTrader: (13)

- I'll have the Whiteline rear DLs if you go for it.

- Do the fuel rails come with Aeroquip parallel hose set-up too, ready to hook up to an FPR?

- Might be interested in the StopTech kit too...

stef_2010

iTrader: (3)

Dont sell, hold out you'll find work soon enough

If it makes you feel any better I drive about a £400 peice of **** aswell when Im not using the impreza

sandyRS16i

iTrader: (13)

I would take the front Stoptech brakes - have a few Q's about them.

NEILB1

iTrader: (9)

Rolling Shell Complete with doors glass bonnet boot wings all freshly painted (underneath too) £2,500
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40 NEILB1 PLEASE
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150

dunx

iTrader: (3)

Swirl pot please.

Also posted on 22B.

dunx

Classic-Scott

I would be interested in the morettes.

Has the O/S one got the vent in it?

Still think you should battle throught it though!!!

Cheers Scott

steve_ra_v-ltd

iTrader: (4)

what make is the fmic & is there pipes etc with it? put me down for it mate dependant on the answers to the questions thanks

Terminator X

iTrader: (7)

Sorry to hear that fella your build thread in projects is a great read!

TX.

C8 DHC 04WRX

iTrader: (13)

Cosworth baffle plate please

Jamz_

iTrader: (12)

I would like these please

whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50 (if joz doesnt want them)

If you could do a deal for them posted that would be great

prodriverules

iTrader: (52)

don't do it daz,ive been driving a L reg 306[£125 lol] the past 3 months while im building mine and it wont be completed anytime soon mate seriously,you'd never forgive yourself when work comes up and your back on the straight and narrow

grahamc

iTrader: (10)

Rolling Shell Complete with doors glass bonnet boot wings all freshly painted (underneath too) £2,500
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40 NEILB1 PLEASE
Safety devices bolt in roll cage 450
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500 GRAHAMC - PMd for more info
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150 GRAHAMC - PMd for more info

Eikka

iTrader: (2)

Rolling Shell Complete with doors glass bonnet boot wings all freshly painted (underneath too) £2,500
Flocked Dash 100
interior complete 300
044 fuel pump Fitted but 0 miles 80
Swirl Pot -6 fittings 40
walbro 40
Safety devices bolt in roll cage 450 yhPM about this
p1 spots 100
morrettes 150
whiteline front ARB 22mm 75
whiteline rear arb 22mm 75
whiteline rear droplinks 50
Alloy front Wishbones (pair) 100
Stop tech 330mm Brakes DS2500 500
Ultralight A-tech 18's wheels and tyres 400
Hi Flow billet fuel rails and -6 fittings 100
1000cc Top Feed injectors 350
Front mount turbo manifold and wastegate, exhaust, sump with oil drain, custom Rad and mounting bracket £1000
Garrett GT35R 500
Built short motor (Strengthened EJ257 block, Cosworth Pistons, Pauter rods, HI flow hi pressure RCM oil pump, acl bearings with 14mm Stud conversion complete with studs all 0 miles) £4000
2.5 AVCS heads Supertech Valves, double springs and Titanium retainers complete with pulleys rocker covers and cambelt covers (drilled for 14mm headstuds 1000
6pd gear box (non DCCD) prop rear diff linkage and gearknob £2,500
rear R180 Shafts pr £150
front shafts 75
SX FPR 100
strut brace Etech front 30
cosworth baffle plate 100
H4 Bi Xenon kit 50
Front mount Intercooler 150

joz8968

iTrader: (13)

I DO want them LOL

scoobyschef

iTrader: (6)

how would the turbo compare to a md321t on a 2.0 build

dazdavies

iTrader: (22)

It would murder it but wouldnt spool as quick. It also needs custom up and down pipes.

This isn't going anywhere until I have buyers for the engine and box at bare minimum.

joz8968

iTrader: (13)

Yeah no worries daz - good luck in whichever way it goes...

phil739

iTrader: (30)

i would be interested in the morrettes and fpr

frayz

iTrader: (7)

Gutted to see it go Daz

CRonson7

iTrader: (4)

pm sent daz, gutted to see it go

stevemoir

iTrader: (24)

updated for me wanting the 044 fuel pump

need4speeduk

iTrader: (26)

Someone ban Daz from all the forums quickly before he does something silly.

DOOOOOOOOOOONT DO IT

stevemoir

iTrader: (24)

forgot to ask mate have you got the swirl pot set up for the 044 aswell

cheers

steve

super_ted

iTrader: (30)

don't do it!

scoobyschef

iTrader: (6)

glad you have had re think daz and seen the light, now mods can we delete this thread incase he has a funny turn again

jim

Arch

iTrader: (59)

Good decision. Put a cover over it and return to it when the time is right

joz8968

iTrader: (13)

In the words of Private Ryan: "Daz don't do it! You're a young man...!!!" lol

Jamz_

iTrader: (12)

gus sti8

iTrader: (5)

044 and swirl pot please daz and inlet mani Jdm one int it