FOR SALE, instant bass....
17 June 2002, 10:53 AM
#1
Scooby Regular
Thread Starter
Join Date: Aug 1999
Posts: 1,208
Likes: 0
Received 0 Likes
on
0 Posts
Well, gonna get rid of some stereo gear 
to help fund other projects so the following is for sale:
Philips DAP6040 Mosfet Amplifier
4x110 \ 2x220 \ 1x440 watt RMS
£100 ******SOLD********
2x Infinity Kappa 12" Quartz injection moulded Subwoofers
£60 each.
Custom built MDF dual Subwoofer box. Self built, you could bury a relative in this, it's *very* sturdy, you can stand on this with ease, airtight, carpeted in Rockford Fosgate lining.
Built for a Citroen ZX 5door, a "perfect" fit, but should fit in larger cars. If anyone is interested I'll post measurements.
£50, and I'll throw in power distribution block, power cable, fuseholders etc.
Alternatively,
Both subs for £100, or subs *and* box £130.
[Edited by ianc - 6/26/2002 8:58:01 AM]
to help fund other projects so the following is for sale:Philips DAP6040 Mosfet Amplifier
4x110 \ 2x220 \ 1x440 watt RMS
£100 ******SOLD********
2x Infinity Kappa 12" Quartz injection moulded Subwoofers
£60 each.
Custom built MDF dual Subwoofer box. Self built, you could bury a relative in this, it's *very* sturdy, you can stand on this with ease, airtight, carpeted in Rockford Fosgate lining.
Built for a Citroen ZX 5door, a "perfect" fit, but should fit in larger cars. If anyone is interested I'll post measurements.
£50, and I'll throw in power distribution block, power cable, fuseholders etc.
Alternatively,
Both subs for £100, or subs *and* box £130.
[Edited by ianc - 6/26/2002 8:58:01 AM]
18 June 2002, 01:35 PM
#6
Scooby Regular
Thread Starter
Join Date: Aug 1999
Posts: 1,208
Likes: 0
Received 0 Likes
on
0 Posts
Some Amp info here...
I ran it at 2x220 and was *very* pleased with it.
Maximum output power: 4x110 W
* MOSFET switched mode power supply
* Continuous output power (DIN 45324/THD 10%).4x110 W (bridged 2x220 W)
* Frequency range: 5 Hz-100 kHz
* Electronic low- and high-pass filters: 60/80/100/120 Nz for each pair.
* 2 ohm 10% THD Stereo: 4x110 W
* Input sensitivity (line input) variable front: 0.3-2.0 Volt
* Signal-to noise ratio (A-weighted): > 100 dB
* Size 1 x W x H (mm): 300 x 267 x 56
There's a Tri-mode also where you can run a pair of speakers and a bridged sub output, but don't have the figures to hand for that.
...oh, and still have the box for it.
[Edited by ianc - 6/18/2002 1:38:58 PM]
I ran it at 2x220 and was *very* pleased with it.
Maximum output power: 4x110 W
* MOSFET switched mode power supply
* Continuous output power (DIN 45324/THD 10%).4x110 W (bridged 2x220 W)
* Frequency range: 5 Hz-100 kHz
* Electronic low- and high-pass filters: 60/80/100/120 Nz for each pair.
* 2 ohm 10% THD Stereo: 4x110 W
* Input sensitivity (line input) variable front: 0.3-2.0 Volt
* Signal-to noise ratio (A-weighted): > 100 dB
* Size 1 x W x H (mm): 300 x 267 x 56
There's a Tri-mode also where you can run a pair of speakers and a bridged sub output, but don't have the figures to hand for that.
...oh, and still have the box for it.
[Edited by ianc - 6/18/2002 1:38:58 PM]
Trending Topics
21 June 2002, 09:21 AM
#10
Scooby Regular
Thread Starter
Join Date: Aug 1999
Posts: 1,208
Likes: 0
Received 0 Likes
on
0 Posts
All figures are RMS, Philips (nor me) go in for the "lets quote PMPO or some other figure that makes it look better than it is"
As for under the seat of a scoob, not sure, let me see if I can give you some measurements...
here we go - Size 1 x W x H (mm): 300 x 267 x 56
or, it's about "yay-big"
[Edited by ianc - 6/21/2002 9:22:17 AM]
As for under the seat of a scoob, not sure, let me see if I can give you some measurements...
here we go - Size 1 x W x H (mm): 300 x 267 x 56
or, it's about "yay-big"
[Edited by ianc - 6/21/2002 9:22:17 AM]
26 June 2002, 08:58 AM
#21
Scooby Regular
Thread Starter
Join Date: Aug 1999
Posts: 1,208
Likes: 0
Received 0 Likes
on
0 Posts
Notice price drop:
2x Infinity Kappa 12" Quartz injection moulded Subwoofers
£60 each.
Custom built MDF dual Subwoofer box. Self built, you could bury a relative in this, it's *very* sturdy, you can stand on this with ease, airtight, carpeted in Rockford Fosgate lining.
Built for a Citroen ZX 5door, a "perfect" fit, but should fit in larger cars. If anyone is interested I'll post measurements.
£50, and I'll throw in power distribution block, power cable, fuseholders etc.
Alternatively,
Both subs for £100, or subs *and* box £130.
IC
2x Infinity Kappa 12" Quartz injection moulded Subwoofers
£60 each.
Custom built MDF dual Subwoofer box. Self built, you could bury a relative in this, it's *very* sturdy, you can stand on this with ease, airtight, carpeted in Rockford Fosgate lining.
Built for a Citroen ZX 5door, a "perfect" fit, but should fit in larger cars. If anyone is interested I'll post measurements.
£50, and I'll throw in power distribution block, power cable, fuseholders etc.
Alternatively,
Both subs for £100, or subs *and* box £130.
IC
01 July 2002, 11:57 AM
#25
Scooby Regular
Thread Starter
Join Date: Aug 1999
Posts: 1,208
Likes: 0
Received 0 Likes
on
0 Posts
Emailed ya, yes recieved the cheque on Friday, put it in on sunday, should clear this week and I'll get to the post office saturday morning and get it off to you.
If I can get to a post office earlier (once the cheque has cleared ) then I'll get it out sooner, I'll let you know when.
IC
If I can get to a post office earlier (once the cheque has cleared
) then I'll get it out sooner, I'll let you know when.IC
Thread
Thread Starter
Forum
Replies
Last Post
gazzawrx
Non Car Related Items For sale
13
17 October 2015 06:51 PM