Turbo Dynamics MD304 Hybrid Turbo 2 months old
#1
Scooby Regular
Thread Starter
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
This turbo has done 2000 miles on my car and has been fitted since 4/11/02.
On AP22 it produces about 280 BHP at the wheels at 1.3 bar, which equates to 350-360 BHP flywheel.
I have been using it with 550cc injectors, FMIC and Ecutek ECU.
The oil was changed when it was fitted and it has had fully synthetic oil, with careful warm up and cool down.
It is based on an IHI VF series turbo with P18 exhaust housing.
It typically produces 1 bar at about 2900-3200 RPM in 5th gear depending on your car and mods.
It is supplied with a 1 bar acutator as standard. It is off the car and ready to ship. Gaskets are not included - you can usually get away with reusing turbo and downpipe gaskets once.
I am switching to something more powerful
in my mad quest for endless power ![Roll Eyes (Sarcastic)](https://www.scoobynet.com/images/smilies/rolleyes.gif)
The turbo is off the car presently and could be shipped next week.
It comes with its Turbo Dynamics birth certificate.
Here are some photos including my AP22 logs at 1.3 bar
(car was not launched in 1st gear and I was very slow with the gearchanges - not the power curve which hits 280 at the wheels in 3rd and 4th gear).
![](http://www.johnbanks.dsl.pipex.com/MD304powerrun.jpg)
![](http://www.johnbanks.dsl.pipex.com/MD304.1.jpg)
![](http://www.johnbanks.dsl.pipex.com/MD304.2.jpg)
http://shop.scoobynet.co.uk/Product.asp?ProductID=573
Here are details of the new product in the Scoobyshop.
On AP22 it produces about 280 BHP at the wheels at 1.3 bar, which equates to 350-360 BHP flywheel.
I have been using it with 550cc injectors, FMIC and Ecutek ECU.
The oil was changed when it was fitted and it has had fully synthetic oil, with careful warm up and cool down.
It is based on an IHI VF series turbo with P18 exhaust housing.
It typically produces 1 bar at about 2900-3200 RPM in 5th gear depending on your car and mods.
It is supplied with a 1 bar acutator as standard. It is off the car and ready to ship. Gaskets are not included - you can usually get away with reusing turbo and downpipe gaskets once.
I am switching to something more powerful
![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
![Roll Eyes (Sarcastic)](https://www.scoobynet.com/images/smilies/rolleyes.gif)
The turbo is off the car presently and could be shipped next week.
It comes with its Turbo Dynamics birth certificate.
Here are some photos including my AP22 logs at 1.3 bar
![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
![](http://www.johnbanks.dsl.pipex.com/MD304powerrun.jpg)
![](http://www.johnbanks.dsl.pipex.com/MD304.1.jpg)
![](http://www.johnbanks.dsl.pipex.com/MD304.2.jpg)
http://shop.scoobynet.co.uk/Product.asp?ProductID=573
Here are details of the new product in the Scoobyshop.
#7
Scooby Regular
Thread Starter
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
Thanks for the offer. A friend recently bid £650 for one with five times the mileage and was not successful - I believe it went for the £750-800 mark. Would take £750 to do the deal today, otherwise I will see what other bids arrive.
Trending Topics
#8
Scooby Regular
Join Date: Dec 2000
Location: A land of lap-dancers and Lanson Black Label
Posts: 9,400
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
John - excuse my limited knowledge but could this be a "bolt on" modification to a more or less standard MY99 UK car? ie TMIC/standard ECU etc etc
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM