clubby

I changed the set up on my Sti7 and have the following for sale:-

D15 Unichip - Fits Nissans 2001 onwards, and Subaru's 2001 onwards.
Dawes Device - Fits just about anything wit a Turbo.

Unichip - £80 ono
Dawes Device £20 ono

E mail me per profile, or on Scoobynet.

[Edited by clubby - 4/30/2003 1:58:37 PM]

mbushy007

So would the unichip fit my wrx01 if so how do i fit it and how much extra BHP can i expect?

clubby

It should fit your WRX01. How much extra bhp - I don't know is the short answer, any answer would be a guess. I had it fitted to my Sti 7, along with a full decat and the Dawes.

It got 314bhp on the rollers at Powerstation Cheltenham, whereas standard car puts out 265bhp. How much of that was the chip and how much the exhaust is anyones guess.

To fit, there are 8 wires that need soldered into the right place. I would let a specialist with Delta Dash do that part, but I cant imagine it would take more than couple of hours tops.

mbushy007

if u can find out that it fits then i will definately have it off u

mbushy007

I will have the dawes as well if it fits

clubby

mbushy007

I just spoke to Dastek (0845 3454045), who sold the chip, and they tell me they are 95% sure it will fit your car. Apparently there were a few 01 WRX's that used the old 2000 model ECU, I didnt know that (and I used to have one).

I just sold the Dawes Device to a guy whose collecting it in 45 minutes, sorry. Jamie Whitfield Racing will do you a nice new one for £50 according to their website.

Let me know what you think.

clubby

mbushy007

Any ideas how much roughly it will be to fit

Cheers Mate

mbushy007

Come on the chat and we can speak easier

mbushy007

BTTT

clubby

Sorry m8, I'm not registered for chat. Call me if you want on 07900 828008.

I would think it'll cost less than £100 to fit. I saw it being removed from my car, and it took less than 20 mins to remove it and resolder in the cut connections.

clubby

mbushy007

Any ideas who i could get to fit it?

5 Type R

Just remember that a Unichip is designed to be mapped specifically to each individual car.
I wouldnt recommend simply fitting a Unichip that was mapped for another car, even if it was the same model.

£80 is a great price but make sure you take it straight to be mapped for your individual car.

In my experience the best mapper for the Unichip by far is Mark at Owen Developments (www.owendevelopments.co.uk)

Speak with Dino on 01865 820580

DTH

YHM

exesspeed

Hi are you now saying the unichip will fit any car but it will need mapping as we know if this is the case and its the unichip ive been serfing the net for info then i will take it for £80 no prob, ive not seen diff unichips for diff cars, but have seen them fitted to all make,s would you please tell me where you got it so i can confirm this before i buy something that isnt for my car, 94 sti. thanks mark , WOULD YOU BE KIND ENOUGH TO HOLD ON TO IT TILL TOMORO SO I CAN CALL THEM, DO YOU HAPPEN TO HAVE oops cap,s on.the modle no or the exact name of the uni chip as i thought there was only 1 plus a boost controller for it as well.

clubby

exesspeed - yhm
dth - yhm

5typeR - I spoke to the suppliers today, and they told me it will slot into any 2001 on Subaru or Nissan. Whether it could be remapped for anything else I dont know.

exesspeed

ok thanks called them too and from 94 on to 2001 jap cars need as they called it a grade A unichip .then from2001 on it needed a drade 12 OR a12 ,I THINK THATS WHAT THEY SAID, so the one off yours should be the 12 one but if it isnt and its the a veresion i will have it no prob, thanks.mark

clubby

Sold to DTH

Thanks everyone for the interest.

Clubby

5 Type R

A D15 Unichip for a post 2001 scoob will definately not work on an earlier model scooby.............

It something to do with the Crank Position Sensor Configuration being different and therefore making it totally incompatible.

clubby

DTH has a 2001 WRX, so shouldnt be a problem for him.

5 Type R

Excellent. Just make sure it gets mapped as soon as poss