HKS Super Sequential Blow Off Valve.
#1
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
Probably not Im afraid.... It mate straight to the front of the square type intercooler. Doubt it would fit the slanted type.
See above pic, which 'should' be working now!
James.
[Edited by James_Harvey - 6/1/2003 12:57:01 PM]
See above pic, which 'should' be working now!
James.
[Edited by James_Harvey - 6/1/2003 12:57:01 PM]
#2
![Cool](https://www.scoobynet.com/images/icons/icon6.gif)
To fit new age STi, but suspect it will fit any model where the dump valve mates directly to the intercooler.
Been on car for one week only.
Boxed, as good as new, £240 ovno.
Cheers,
James.
[Edited by James_Harvey - 5/28/2003 4:35:01 PM]
Been on car for one week only.
Boxed, as good as new, £240 ovno.
Cheers,
James.
[Edited by James_Harvey - 5/28/2003 4:35:01 PM]
#7
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
this is a noisy job
I have one, if you time it right [drivig past bus stops etc] you can get people to jump & scream.
looks nice under the bonnet as its shiny, been told you can get different vanes to change the sounds.
mine is on at 93 wrx
I have one, if you time it right [drivig past bus stops etc] you can get people to jump & scream.
looks nice under the bonnet as its shiny, been told you can get different vanes to change the sounds.
mine is on at 93 wrx
Trending Topics
#8
![Talking](https://www.scoobynet.com/images/icons/icon10.gif)
i just bought one for a wrx and put it on my uk spec with relatively no probs. it needed a reducer from the intercooler whoch was about 35mm to a 20mm pipe onto the bov. Sounds really nice if u ease off at about 3000 cos u get a chirp and chatter. If u boot it and let off u get a short high pitch chirp....eitherway it's a lot of fun :-)
#9
![Smile](https://www.scoobynet.com/images/icons/icon7.gif)
Its like a whistle at low boost, with a whistle and chatter at high boost if that makes sense. It has a purble inner. I belive you can buy others that change the noice.
It also has an adapter for converting to recirc. This will require extra hoses and reducers which I don't have. Nothing extra needed for VTA though!
Nice and shiny and looks good under the bonnet![Smile](https://www.scoobynet.com/images/smilies/smile.gif)
Also of the usual high HKS quality.
This version has a mounting plate that screws straight on the front of the Intercooler using the stock allen bolts.
Piece of cake to fit!
Hope that helps,
James.
It also has an adapter for converting to recirc. This will require extra hoses and reducers which I don't have. Nothing extra needed for VTA though!
Nice and shiny and looks good under the bonnet
![Smile](https://www.scoobynet.com/images/smilies/smile.gif)
Also of the usual high HKS quality.
This version has a mounting plate that screws straight on the front of the Intercooler using the stock allen bolts.
Piece of cake to fit!
Hope that helps,
James.
#17
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
Bought on a whim at JapFest. Prefer the sound of the Blitz that I already have. HKS = Whistle, Chirp. Blitz - Whoosh.
There is nowt wrong or sus with it, just the sound didn't suit my tastes![Smile](https://www.scoobynet.com/images/smilies/smile.gif)
This is a bargain for somebody, these are £290 new!
James.
There is nowt wrong or sus with it, just the sound didn't suit my tastes
![Smile](https://www.scoobynet.com/images/smilies/smile.gif)
This is a bargain for somebody, these are £290 new!
James.
Thread
Thread Starter
Forum
Replies
Last Post