Peugeot Mi16 Engine
25 June 2003, 11:07 AM
#1
Scooby Newbie
Thread Starter
Join Date: May 2003
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Am selling my 1.9 Mi16 engine from my 405.
The engine has done 32K miles since a full professional rebuild, which included new crankshaft, con rods and pistons etc. Also had a new clutch fitted at the same time. Has also recently had new plugs, leads, coil, rotor arm and cap and idle speed control valve.
Have receipt for nearly £2600 for the engine rebuild + plus receipts for all of the bits. Engine has had regular oil changes with castrol oil and genuine Peugeot filters.
Will sell for £450 with all ancillaries including wiring loom + ECU etc and recent new alternator. Also have green induction kit.
[Edited by Scoobie_Dave - 6/25/2003 5:52:15 PM]
The engine has done 32K miles since a full professional rebuild, which included new crankshaft, con rods and pistons etc. Also had a new clutch fitted at the same time. Has also recently had new plugs, leads, coil, rotor arm and cap and idle speed control valve.
Have receipt for nearly £2600 for the engine rebuild + plus receipts for all of the bits. Engine has had regular oil changes with castrol oil and genuine Peugeot filters.
Will sell for £450 with all ancillaries including wiring loom + ECU etc and recent new alternator. Also have green induction kit.
[Edited by Scoobie_Dave - 6/25/2003 5:52:15 PM]
25 June 2003, 08:04 PM
#5
Scooby Newbie
Thread Starter
Join Date: May 2003
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Hi, its from a 91' 405Mi16 so its the alloy block model, am selling bits seperately. You can have the gearbox with it, but its not the Mi16 gearbox as the ratio's are wrong (I bought a replacement gearbox from a salvage yard as mine was starting to whine a bit, fitted the replacement and it wasnt the right ratio's but after spending 2 days changing it I didnt bother changing it again)
Trending Topics
26 June 2003, 12:08 PM
#9
Scooby Newbie
Thread Starter
Join Date: May 2003
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
Yes the engine will fit into a 205, have helped fit one into a friends E reg 1.6 Gti. The 6 speed gearbox will fit, but apparently you will lose a bit of steering lock in one direction as the 6 speed box is a bit longer than the 5 speed.
Dave
Yes the engine will fit into a 205, have helped fit one into a friends E reg 1.6 Gti. The 6 speed gearbox will fit, but apparently you will lose a bit of steering lock in one direction as the 6 speed box is a bit longer than the 5 speed.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM