ST170 calipers
25 July 2003, 12:16 PM
#1
As title, i have aquired some brand new calipers, carriers, pads and bolts from the focus st170's, when used with the focus st170 300mm discs they will fit mk3, 4, 5 and 6 escorts ( 3 & 4's require a 14mm washer between the caliper and hub )
and Mk3, 4, 5, and 6 fiesta's ( straight on ) all you need to do is to drill out the hub from 10mm to 12mm where the caliper bolts go as these use larger bolts.
£200 for a pair.
Discs are around £110 per pair from fords or £62 if you know someone who can get discount!!
Oh, and these will fit under 16" rims!!
fitting: Drilling the hub is literally just a case of running a 12mm drill bit through the holes that are already there, i usually go through first with an 11mm bit then 12!!
All you need is a battery drill and a 11 and 12mm drill bit, once your discs are off, remove the calipers, and where the bolts go through to hold the caliper, these are the ones you drill out!!
Really is that simple
and Mk3, 4, 5, and 6 fiesta's ( straight on ) all you need to do is to drill out the hub from 10mm to 12mm where the caliper bolts go as these use larger bolts.
£200 for a pair.
Discs are around £110 per pair from fords or £62 if you know someone who can get discount!!
Oh, and these will fit under 16" rims!!
fitting: Drilling the hub is literally just a case of running a 12mm drill bit through the holes that are already there, i usually go through first with an 11mm bit then 12!!
All you need is a battery drill and a 11 and 12mm drill bit, once your discs are off, remove the calipers, and where the bolts go through to hold the caliper, these are the ones you drill out!!
Really is that simple
Thread
Thread Starter
Forum
Replies
Last Post