TEK1 ECU - MY99/00
12 September 2003, 10:19 AM
#1
MY99/00 ECU remapped to TEK1 for improved drivability and performance.
This ECU is much improved Vs an AE802 and a slight improvment over an AE801 with better fuelling and a touch more boost.
What this ECU does have tho' is an ECUTEK Liscence installed.
This will enable the mapper to upgrade to TEK2 or 3 without having to charge the Liscence fee (which get's paid to ECUTEK).
I have been quoted a £300 reduction on a remap, if this ECU is used as the base i.e £350+VAT instead of £650+VAT.
Price £200 with exchange AE800/AE801/AE802
OR £250 outright.
Both prices include 'Special Delivery Postage'.
This ECU is much improved Vs an AE802 and a slight improvment over an AE801 with better fuelling and a touch more boost.
What this ECU does have tho' is an ECUTEK Liscence installed.
This will enable the mapper to upgrade to TEK2 or 3 without having to charge the Liscence fee (which get's paid to ECUTEK).
I have been quoted a £300 reduction on a remap, if this ECU is used as the base i.e £350+VAT instead of £650+VAT.
Price £200 with exchange AE800/AE801/AE802
OR £250 outright.
Both prices include 'Special Delivery Postage'.
12 September 2003, 08:48 PM
#3
O.K no takers yet, so lets talk perfromance figures :
Vehicle : Subaru Impreza MY00
Modification : ITG Filter, Decat Centre, TSL Grp'N' BackBox, Standard downpipe.
ECU : Standard AE802
Performance : 226.5BHP @ 6380rpm / 210lb/ft
Same Vehicle, Same Rolling Road
ECU : AE802 Remapped to TEK1 by Merv @ PE
Performance : 248BHP @ 6400rpm / 218lb/ft
And as mentioned above the TEK1 can be taken to TEK2 or 3 at a considerable saving.
Vehicle : Subaru Impreza MY00
Modification : ITG Filter, Decat Centre, TSL Grp'N' BackBox, Standard downpipe.
ECU : Standard AE802
Performance : 226.5BHP @ 6380rpm / 210lb/ft
Same Vehicle, Same Rolling Road
ECU : AE802 Remapped to TEK1 by Merv @ PE
Performance : 248BHP @ 6400rpm / 218lb/ft
And as mentioned above the TEK1 can be taken to TEK2 or 3 at a considerable saving.
....
Trending Topics
14 September 2003, 08:56 PM
#13
ScoobyDaz,
If you have a standard Ae802 fitted, which an MY00 probably has, then yes. It should give similar improvements to those detailed abaove i.e 20 more BHP and a bit more torque.
An Ae801 will give improvements over an Ae802 (there's plenty of other topics on here about that subject) and this ECU is slightly better then an Ae801 with the added bonus of a pre-installed ECUTEK Liscence, should you wish to go further at a later date.
If you have a standard Ae802 fitted, which an MY00 probably has, then yes. It should give similar improvements to those detailed abaove i.e 20 more BHP and a bit more torque.
An Ae801 will give improvements over an Ae802 (there's plenty of other topics on here about that subject) and this ECU is slightly better then an Ae801 with the added bonus of a pre-installed ECUTEK Liscence, should you wish to go further at a later date.
15 September 2003, 11:12 PM
#19
Scooby Regular
Join Date: Oct 2002
Location: north wales
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
Hi Scott,
Thanks for the reply the other day, but i'm afraid the missus has suspended all spending on the scoob, while i do up the attic.
Sorry mate,
James.
Thanks for the reply the other day, but i'm afraid the missus has suspended all spending on the scoob, while i do up the attic.
Sorry mate,
James.
09 December 2003, 11:05 PM
#25
Scooby Regular
Join Date: Oct 2002
Location: north wales
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
Hi Scott,
Even though you say this would cost about £350+vat to get upgraded to a Tek 2 cos of the license, it has still worked out better for you to buy Peccys (in another thread) Tek 2 re-map rather than get yours re-mapped. I may be way of the mark here and apologise if i am, but if i was interested in a Tek 2 i would be better of getting one of them rather than buying your Tek 1 and getting it re-mapped as you suggest in this post, unless the price was dropped a bit.
Selling it the way you are seems an expensive way of getting a Tek 2.
I am considering one of these options at the moment you see, so i'm not just disputing your sale just working out figures.
No offence meant mate.
Scott YHM.
James.
[Edited by scoobyfella - 9/12/2003 11:06:00 PM]
Even though you say this would cost about £350+vat to get upgraded to a Tek 2 cos of the license, it has still worked out better for you to buy Peccys (in another thread) Tek 2 re-map rather than get yours re-mapped. I may be way of the mark here and apologise if i am, but if i was interested in a Tek 2 i would be better of getting one of them rather than buying your Tek 1 and getting it re-mapped as you suggest in this post, unless the price was dropped a bit.
Selling it the way you are seems an expensive way of getting a Tek 2.
I am considering one of these options at the moment you see, so i'm not just disputing your sale just working out figures.
No offence meant mate.
Scott YHM.
James.
[Edited by scoobyfella - 9/12/2003 11:06:00 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM