EJ20 and EJ25
21 February 2005, 08:41 PM
#1
Scooby Regular
Thread Starter
Join Date: May 2003
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
EJ20 and EJ25
As well as the tuning and styling parts detailed on another thread I also have
A stripped but complete 1997 EJ20 ( UK ) engine, needs crank and a rod ( yes number 3 surprise, surprise ). Heads are fine as is the block, oil pump water pump, inlet manifold etc, but no Turbo.
And
An EJ25 complete bottom end all built and ready to go. ( A 2.5 project that didn't get into the car ).
Also a pair of heads from a mark 1 STI, with cams.
I'm open to offers on any of this. Sensible of course.
Cheers
Ivan
A stripped but complete 1997 EJ20 ( UK ) engine, needs crank and a rod ( yes number 3 surprise, surprise ). Heads are fine as is the block, oil pump water pump, inlet manifold etc, but no Turbo.
And
An EJ25 complete bottom end all built and ready to go. ( A 2.5 project that didn't get into the car ).
Also a pair of heads from a mark 1 STI, with cams.
I'm open to offers on any of this. Sensible of course.
Cheers
Ivan
21 February 2005, 08:47 PM
#2
Scooby Regular
Thread Starter
Join Date: May 2003
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
22 February 2005, 10:59 PM
#8
Scooby Regular
Thread Starter
Join Date: May 2003
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Sorry that was misleading, the pistons ( as far as I know ) did not come from an EJ257 however all measurements and weights are identical to one which did come from an EJ257.
Thought I had better be pedantic rather than sorry?
Ive
Thought I had better be pedantic rather than sorry?
Ive
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Car Parts For Sale
2
13 March 2016 05:24 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM