For sale/ breaking MY95 STI-RA
22 July 2005, 10:35 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: N.E. WALES
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
For sale/ breaking MY95 STI-RA
Car is still complete and running until the motor is sold. Will be getting broken up over the next few weeks. Nice motor, close ratio box with DCCD diff and plated rear RA diff etc etc
Only been imported and registered in April, Was Grade 4 import, Has met with stone wall on N/S A pillar
Loads of extras on car, need the weekend to type list up!
Ideal for full reshell or UK upgrade.
It can be repaired but havnt got the time and space to sort it out.
I would prefer for it to go as a complete car for a sensible offer.
I will post pics on here in the week.
Just gauging the interest.
Based near chester North wales.
cheers
Only been imported and registered in April, Was Grade 4 import, Has met with stone wall on N/S A pillar
Loads of extras on car, need the weekend to type list up!
Ideal for full reshell or UK upgrade.
It can be repaired but havnt got the time and space to sort it out.
I would prefer for it to go as a complete car for a sensible offer.
I will post pics on here in the week.
Just gauging the interest.
Based near chester North wales.
cheers
Last edited by H.Q. RALLY PREP; 23 July 2005 at 08:21 PM.
23 July 2005, 01:26 PM
#2
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: N.E. WALES
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Still havnt got any prices sorted yet but here is a brief list of the mods on top of the sti ra equiptment already fitted.
Apexi ecu mapped by andy f with adjustable boost controller (to suit 95 ron fuel)
P1 oz wheels with new falken tyres (Only covered 2000km since april)
4 pot brake calipers with new discs and carbon metallic pads and prodrive pads available aswell.
decat wrapped downpipe and sti exhaust system.
new motorsport fuel pump
new helix paddle clutch and steel lightened flywheel
hks filter
New radiator fitted week before accident
New genuine subaru fuel gauge sender units fitted
Jap spec roll cage
Group n wheel stud conversion
Mintex 1155 pads in rear brakes and braided hoses fitted.
New genuine subaru coil packs and NGK plugs fitted as recommended by andy before mapping.
Cam belt changed.
cheers mark
Apexi ecu mapped by andy f with adjustable boost controller (to suit 95 ron fuel)
P1 oz wheels with new falken tyres (Only covered 2000km since april)
4 pot brake calipers with new discs and carbon metallic pads and prodrive pads available aswell.
decat wrapped downpipe and sti exhaust system.
new motorsport fuel pump
new helix paddle clutch and steel lightened flywheel
hks filter
New radiator fitted week before accident
New genuine subaru fuel gauge sender units fitted
Jap spec roll cage
Group n wheel stud conversion
Mintex 1155 pads in rear brakes and braided hoses fitted.
New genuine subaru coil packs and NGK plugs fitted as recommended by andy before mapping.
Cam belt changed.
cheers mark
Trending Topics
24 July 2005, 10:59 AM
#9
Scooby Regular
Join Date: Feb 2005
Location: glasgow
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WUZ
Price on the Apexi Power Fc and Boost Control please!
Will pay a quid more than drb5
Russell
Will pay a quid more than drb5
Russell
LOL
Tut tut Dave and you said you would not do it.
Price for the roll cage please and for the engine inc ancilliaries?
Grant
24 July 2005, 11:03 AM
#11
Scooby Regular
Join Date: Sep 2003
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Price for the Apexi ECU and controller please mate?
Also, is the car in white and did you happen to fit an sti v5 high wing spoiler on it? If so, is it still ok and how much is it up for?
Ta
Also, is the car in white and did you happen to fit an sti v5 high wing spoiler on it? If so, is it still ok and how much is it up for?
Ta
24 July 2005, 11:13 AM
#12
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: N.E. WALES
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sti-spec-a
LOL
Tut tut Dave and you said you would not do it.
Price for the roll cage please and for the engine inc ancilliaries?
Grant
Tut tut Dave and you said you would not do it.
Price for the roll cage please and for the engine inc ancilliaries?
Grant
Do you want clutch, flywheel, turbo, intercooler, full loom to suit the fifth injector, ecu mapped to suit engine etc, etc
Ps i already have an offer on the ecu though and plenty of reserves!!!
rollcage £100
cheers mark
24 July 2005, 11:15 AM
#13
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: N.E. WALES
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jumbomechanic
Price for the Apexi ECU and controller please mate?
Also, is the car in white and did you happen to fit an sti v5 high wing spoiler on it? If so, is it still ok and how much is it up for?
Ta
Also, is the car in white and did you happen to fit an sti v5 high wing spoiler on it? If so, is it still ok and how much is it up for?
Ta
cheers mark
25 July 2005, 10:53 PM
#16
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: N.E. WALES
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Here we go then........
Helix sprung centre clutch and genuine cover and bearing( 40 miles on plate)
£150
Steel lightweight flywheel
£100
4 pot brake calipers and discs & carbon met. & prodrive pads £300
Rear brake calipers, discs and new Mintex 1155 pads £100
Braided hoses x4 £20
Sti closed deck engine no ancillaries £900
Sti-ra gearbox with electronic center diff £850
Sti-ra rear plated diff £350
Propshaft £30
P1 OZ Racing 17” (Graphite Grey) wheels and excellent falken tyres £450
Apexi ECU and manual boost controller £350
Full car Wiring loom to suit fifth injector etc £100
New radiator and twin fans £100
Sytec motorsport fuel pump £60
Decat downpipe (wrapped) and sti system £100
Speedometer converter for cable drive £30
Sti grey velour full interior inc. door cards (no rips or burns) £250
Pr of rear lights £10
O/S Headlight £10
O/S alloy bottom arm £20
Sti alloy castor blocks Pr £15
Sti RA Alloy Bonnet £100
Sti RA lightweight bootlid inc high level spoiler £80
Knocklink inc remote led mod £130
Hks panel filter with airbox and MAF sensor £35
Pr front shafts £60
Pr rear shafts £60
Doors £25ea
4 N/new coil packs (1 month old) £100
Fuel tank sender units (gen Subaru, 1 month old) £90
Intercooler and blue sti pipework £40
Turbo £100
Rear bumper £40
Sti RA 16” wheels x4 £60
Starter motor £30
Alternator £30
P/steering pump and pipe work £20
Inlet manifold complete with fifth injector £50
Sti Carbon fibre front strut brace £40
Sti instrument cluster with center diff display £30
Quickshift gearlever with linkage £25
Boost gauge c/w pod and fit. Kit £20
Sti Nardi steering wheel and boss £50
Large red mudflap kit and alloy mounting brackets x4 £20
Japanese road spec Rollcage £100
Front and rear hub/flange assemblys. With Gp N stud & nuts £80
Please use e-mail as i cant empty my inbox quick enough and having to delete messages!!!!!!!
cheers mark
Nr chester N.wales
Helix sprung centre clutch and genuine cover and bearing( 40 miles on plate)
£150
Steel lightweight flywheel
£100
4 pot brake calipers and discs & carbon met. & prodrive pads £300
Rear brake calipers, discs and new Mintex 1155 pads £100
Braided hoses x4 £20
Sti closed deck engine no ancillaries £900
Sti-ra gearbox with electronic center diff £850
Sti-ra rear plated diff £350
Propshaft £30
P1 OZ Racing 17” (Graphite Grey) wheels and excellent falken tyres £450
Apexi ECU and manual boost controller £350
Full car Wiring loom to suit fifth injector etc £100
New radiator and twin fans £100
Sytec motorsport fuel pump £60
Decat downpipe (wrapped) and sti system £100
Speedometer converter for cable drive £30
Sti grey velour full interior inc. door cards (no rips or burns) £250
Pr of rear lights £10
O/S Headlight £10
O/S alloy bottom arm £20
Sti alloy castor blocks Pr £15
Sti RA Alloy Bonnet £100
Sti RA lightweight bootlid inc high level spoiler £80
Knocklink inc remote led mod £130
Hks panel filter with airbox and MAF sensor £35
Pr front shafts £60
Pr rear shafts £60
Doors £25ea
4 N/new coil packs (1 month old) £100
Fuel tank sender units (gen Subaru, 1 month old) £90
Intercooler and blue sti pipework £40
Turbo £100
Rear bumper £40
Sti RA 16” wheels x4 £60
Starter motor £30
Alternator £30
P/steering pump and pipe work £20
Inlet manifold complete with fifth injector £50
Sti Carbon fibre front strut brace £40
Sti instrument cluster with center diff display £30
Quickshift gearlever with linkage £25
Boost gauge c/w pod and fit. Kit £20
Sti Nardi steering wheel and boss £50
Large red mudflap kit and alloy mounting brackets x4 £20
Japanese road spec Rollcage £100
Front and rear hub/flange assemblys. With Gp N stud & nuts £80
Please use e-mail as i cant empty my inbox quick enough and having to delete messages!!!!!!!
cheers mark
Nr chester N.wales
Last edited by H.Q. RALLY PREP; 25 July 2005 at 11:44 PM.
25 July 2005, 11:15 PM
#18
Scooby Regular
iTrader: (6)
Join Date: Oct 2004
Location: Aberdeenshire
Posts: 1,944
Likes: 0
Received 0 Likes
on
0 Posts
How much for the clutch including flywheel? Presume its a sti one thats just been lightened further? Also after the lower centre console that runs between the front seats to the rear if in good nick. (mines scuffed a fair bit). Is the steering rack on good nick and is it a 13:1 ratio?
Regards,
Doug.
Regards,
Doug.
25 July 2005, 11:42 PM
#19
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: N.E. WALES
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Hi, forgot to put that on the list!
Never presume, all this is proper parts, not cheap shoddy stuff, it is a pukka steel job direct from japan, not something thats been done in a lathe and needs a goverment health warning on it!!!!!
pic as follows.......
£100 for the flywheel
And yes the centre console is tidy but the centre diff controller is in it aswell so it may be minus the roller switch.
cheers mark
Never presume, all this is proper parts, not cheap shoddy stuff, it is a pukka steel job direct from japan, not something thats been done in a lathe and needs a goverment health warning on it!!!!!
pic as follows.......
£100 for the flywheel
And yes the centre console is tidy but the centre diff controller is in it aswell so it may be minus the roller switch.
cheers mark
25 July 2005, 11:48 PM
#20
Scooby Regular
iTrader: (6)
Join Date: Oct 2004
Location: Aberdeenshire
Posts: 1,944
Likes: 0
Received 0 Likes
on
0 Posts
If you can wait till the end of the month I'll take the flywheel off your hands.
Any idea what power/torque the clutch is rated at?
The console is for a ver.6 type r. Do you know if they are the same? Im not bothered about the switch. Straight swap with the one ive got cause its all scuffed at the back from passengers clown feet.
Cheers,
Doug.
Any idea what power/torque the clutch is rated at?
The console is for a ver.6 type r. Do you know if they are the same? Im not bothered about the switch. Straight swap with the one ive got cause its all scuffed at the back from passengers clown feet.
Cheers,
Doug.
Last edited by doug2507; 25 July 2005 at 11:51 PM. Reason: description
26 July 2005, 06:42 PM
#24
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: N.E. WALES
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
apoligies...........
Hello all, I am not being rude by not replying to e-mails, it just that iv'e had over 30 since i posted the list up last nite!!!!!!!!
As i have already said the car is still complete and will remain intact till the engine is sold or a deposit taken on the unit. So could you all be patient on the other parts request but keep them coming as i will deal with them in the order they are received so only please e-mail as it is easier for me to sort out. I am currently negociating wit a bloke over the engine so fingers crossed it shouldnt be long till sale time
Just to answer a couple of simple questions i have received:
rear lights are not all clear at the bottom as these were not fitted to the version 2's and they would be on e-bay selling for mega money.
The wheels are a bit scuffed as they had done 50'000 miles on my mates P1 before i had them but the tyres are only 6 weeks or so old and done minimal mileage. Everyone seems to be fascinated with the flywheel and is in high demand. I will be fairwith all parts and i will contact all of you in the order i received the messages.
I will also post pics later this week on the most popular items for reference.
Please use the e-mail for requests if possible............
Cheers mark
As i have already said the car is still complete and will remain intact till the engine is sold or a deposit taken on the unit. So could you all be patient on the other parts request but keep them coming as i will deal with them in the order they are received so only please e-mail as it is easier for me to sort out. I am currently negociating wit a bloke over the engine so fingers crossed it shouldnt be long till sale time
Just to answer a couple of simple questions i have received:
rear lights are not all clear at the bottom as these were not fitted to the version 2's and they would be on e-bay selling for mega money.
The wheels are a bit scuffed as they had done 50'000 miles on my mates P1 before i had them but the tyres are only 6 weeks or so old and done minimal mileage. Everyone seems to be fascinated with the flywheel and is in high demand. I will be fairwith all parts and i will contact all of you in the order i received the messages.
I will also post pics later this week on the most popular items for reference.
Please use the e-mail for requests if possible............
Cheers mark
27 July 2005, 05:47 PM
#29
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: N.E. WALES
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Hi, Well still inundated with e-mails again, I still have everything, nothing has moved!
i will contact you all in order of message received. But ive had a lot of interest in most parts except the engine is yet to go.
Cheers mark
E-mail only please.......ta
i will contact you all in order of message received. But ive had a lot of interest in most parts except the engine is yet to go.
Cheers mark
E-mail only please.......ta