Loads of nice parts, check these out!
09 February 2006, 10:13 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2001
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Loads of nice parts, check these out!
I am returning my Uk 98 turbo to standard :-(
so I have the following parts for sale…………..
HKS 2 bar boost gauge white background, silver bezel £ 90.00
Backlit in green to match classic dash. Includes grey RH
corner pod
APS Front mount I/C Approx 1 year old good condition
Includes all pipework and brackets. Also brand new
compressor discharge hose to suit. I/C is finished in silver
will fit 97/98 cars and possibly others £ 600.00
APS 3.5 inch Race exhaust system with splitter removed from
downpipe, No cats, parts will not interchange with standard
exhaust. 4.5” angled exit tail, noise bung included.
Some scratches on centre section and a dent on bottom of
backbox. (caught on a speed bump) Will fit all Imprezas
classic or newage Huge flow 3.5” pipework can support rotated
mount turbo with extra parts available from APS £ 650.00
Injectors 740cc Nismo multi spray, bought from Andy F
These are direct fit to phase 2 rails and I also have adaptor kit
to fit phase 1 rails £ 300.00
SX regulator with push on fittings, includes pressure gauge
anodised red. Also inc fuel rail adaptor £ 150.00
TD05/06 20g turbo built by Andy F includes water and oil pipes £ 600.00
OMP steel strut brace for classic, adjustable, red £ 35.00
Please PM with your interest
If you require postage that will be extra depending on weight
Thanks for looking
George
so I have the following parts for sale…………..
HKS 2 bar boost gauge white background, silver bezel £ 90.00
Backlit in green to match classic dash. Includes grey RH
corner pod
APS Front mount I/C Approx 1 year old good condition
Includes all pipework and brackets. Also brand new
compressor discharge hose to suit. I/C is finished in silver
will fit 97/98 cars and possibly others £ 600.00
APS 3.5 inch Race exhaust system with splitter removed from
downpipe, No cats, parts will not interchange with standard
exhaust. 4.5” angled exit tail, noise bung included.
Some scratches on centre section and a dent on bottom of
backbox. (caught on a speed bump) Will fit all Imprezas
classic or newage Huge flow 3.5” pipework can support rotated
mount turbo with extra parts available from APS £ 650.00
Injectors 740cc Nismo multi spray, bought from Andy F
These are direct fit to phase 2 rails and I also have adaptor kit
to fit phase 1 rails £ 300.00
SX regulator with push on fittings, includes pressure gauge
anodised red. Also inc fuel rail adaptor £ 150.00
TD05/06 20g turbo built by Andy F includes water and oil pipes £ 600.00
OMP steel strut brace for classic, adjustable, red £ 35.00
Please PM with your interest
If you require postage that will be extra depending on weight
Thanks for looking
George
Last edited by GBruce; 28 February 2006 at 09:39 PM.
10 February 2006, 08:47 AM
#3
Scooby Regular
Join Date: Feb 2006
Location: In The Middle
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Hi George
May be interested in the boost guage and possible knock sensor.
Do you have any pics of the guage?
Also, whereabouts are you located?
Thanks mate
Russ
May be interested in the boost guage and possible knock sensor.
Do you have any pics of the guage?
Also, whereabouts are you located?
Thanks mate
Russ
10 February 2006, 08:56 AM
#4
Intercooler - Might be interested, how easy are these things to fit. I know the bumper needs modding, but what else needs to be done ? Or is is a simple case of mechano and bolting all the various pipes etc together. Any cutting to metal work needed.
Any pics would be appreciated: robin_dixon@btopenworld.com
Any pics would be appreciated: robin_dixon@btopenworld.com
10 February 2006, 10:29 AM
#5
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Don't think George gets on here until the evenings...
He is in the South East but I am sure things can be posted.
Rob,
Only the bumper needs cutting / trimming.. it is the same intercooler as I have on my car. Very strong intercooler (no mesh needed) and very efficent cooling etc..
Simon
He is in the South East but I am sure things can be posted.
Rob,
Only the bumper needs cutting / trimming.. it is the same intercooler as I have on my car. Very strong intercooler (no mesh needed) and very efficent cooling etc..
Simon
10 February 2006, 12:24 PM
#6
Scooby Regular
Thread Starter
Join Date: Dec 2001
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Simon :-)
Just a quick visit to see how things are going, I will reply to all PM and questions tonight when I have more time.
Items will be offered to first person who showed interest by PM or post then down the line if they dont want etc.
I am in Canterbury, Kent
Thanks
George
Just a quick visit to see how things are going, I will reply to all PM and questions tonight when I have more time.
Items will be offered to first person who showed interest by PM or post then down the line if they dont want etc.
I am in Canterbury, Kent
Thanks
George
10 February 2006, 05:27 PM
#7
Scooby Regular
Thread Starter
Join Date: Dec 2001
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Rob evo5
There is a front picture and an engine bay shot of the i/c here, I will send one of the parts separate. No metal parts on your car have to be cut to fit this kit.
http://bbs.scoobynet.co.uk/showthrea...loon+with+mods
Rodintee,
I'll get a picture for you :-)
George
There is a front picture and an engine bay shot of the i/c here, I will send one of the parts separate. No metal parts on your car have to be cut to fit this kit.
http://bbs.scoobynet.co.uk/showthrea...loon+with+mods
Rodintee,
I'll get a picture for you :-)
George
Trending Topics
10 February 2006, 06:22 PM
#9
Scooby Regular
Thread Starter
Join Date: Dec 2001
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
The manifold has been wrapped previously but cracked around the collector joint which has been welded. I has also lost it's shine but that's what happens when its under a car getting splashed by water/salt and road grime
Thanks George
Thanks George
12 February 2006, 09:14 PM
#17
Scooby Regular
Thread Starter
Join Date: Dec 2001
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
I am returning my Uk 98 turbo to standard :-(
so I have the following parts for sale…………..
HKS 2 bar boost gauge white background, silver bezel £ 90.00
Backlit in green to match classic dash. Includes grey RH
corner pod
APS Front mount I/C Approx 1 year old good condition
Includes all pipework and brackets. Also brand new
compressor discharge hose to suit. I/C is finished in silver
will fit 97/98 cars and possibly others £ 600.00
APS 3.5 inch Race exhaust system with splitter removed from
downpipe, No cats, parts will not interchange with standard
exhaust. 4.5” angled exit tail, noise bung included.
Some scratches on centre section and a dent on bottom of
backbox. (caught on a speed bump) Will fit all Imprezas
classic or newage Huge flow 3.5” pipework can support rotated
mount turbo with extra parts available from APS £ 650.00
Injectors 740cc Nismo multi spray, bought from Andy F
These are direct fit to phase 2 rails and I also have adaptor kit
to fit phase 1 rails. As these are the multi spray
design they give a nice smooth idle like OE despite their flow, unlike some
older design 550cc 740cc injectors. £ 300.00
SX regulator with push on fittings, includes pressure gauge
anodised red. Very good condition, still have box
includes fuel rail adaptor £ 150.00
TD05/06 20g turbo built by Andy F includes water and oil pipes
Done approx 5000 miles, was one of the first, had complete overhaul
when converted £ 600.00
OMP steel strut brace for classic, adjustable, red £ 35.00
Please PM with your interest
If you require postage that will be extra depending on weight
Thanks for looking
George
so I have the following parts for sale…………..
HKS 2 bar boost gauge white background, silver bezel £ 90.00
Backlit in green to match classic dash. Includes grey RH
corner pod
APS Front mount I/C Approx 1 year old good condition
Includes all pipework and brackets. Also brand new
compressor discharge hose to suit. I/C is finished in silver
will fit 97/98 cars and possibly others £ 600.00
APS 3.5 inch Race exhaust system with splitter removed from
downpipe, No cats, parts will not interchange with standard
exhaust. 4.5” angled exit tail, noise bung included.
Some scratches on centre section and a dent on bottom of
backbox. (caught on a speed bump) Will fit all Imprezas
classic or newage Huge flow 3.5” pipework can support rotated
mount turbo with extra parts available from APS £ 650.00
Injectors 740cc Nismo multi spray, bought from Andy F
These are direct fit to phase 2 rails and I also have adaptor kit
to fit phase 1 rails. As these are the multi spray
design they give a nice smooth idle like OE despite their flow, unlike some
older design 550cc 740cc injectors. £ 300.00
SX regulator with push on fittings, includes pressure gauge
anodised red. Very good condition, still have box
includes fuel rail adaptor £ 150.00
TD05/06 20g turbo built by Andy F includes water and oil pipes
Done approx 5000 miles, was one of the first, had complete overhaul
when converted £ 600.00
OMP steel strut brace for classic, adjustable, red £ 35.00
Please PM with your interest
If you require postage that will be extra depending on weight
Thanks for looking
George
Last edited by GBruce; 28 February 2006 at 09:42 PM.
