Hybrid GT30, Samco 3" Induction Hose & RCM Induction Kit & Up pipe!
#1
Scooby Regular
Thread Starter
Join Date: Jul 2003
Location: Behind the wheel of a Time Attack R33 GTR
Posts: 5,734
Likes: 0
Received 0 Likes
on
0 Posts
Hybrid GT30, Samco 3" Induction Hose & RCM Induction Kit & Up pipe!
All of the below will be available from mid february, so at the moment i am giving people the oppty to snap them up!!
Im selling this turbo as ive gone for something different. This is a large standard position GT30 based turbo, not for the faint hearted. This is ideally suited to 2.5 or 2.33 builds or high revving 2.0 builds. This will give you an almighty shove when you hit 4000 rpm and will continue to impale you to the seat until the redline.
With the correct supporting mods this is a 450bhp turbo @ ~1.8bar, My car is running at approx ~400 at 1.55bar and over 400lbft from 4200rpm. My car achieves 1 bar at 3000 rpm on UK heads, with a better setup it may even spool sooner than that too. It has a polished compressor cover and a ported inlet. This is Internally gated so is literally a "BOLT ON" turbo
I has an uprated 1.25bar actuator. This is a 55lb/min turbo so can flow plenty of air if you give it the chance.
£750 o.n.o complete with braided oil line and water lines. (£830 o.n.o with the induction hose below)
This turbo is at present having the cover converted to 3" which means that it will flow even better than is mentionned above!!
I also have a 3" Red Samco "Big Bore" induction hose to complement it. £100
Finally i will also have an RCM 80mm Maf Tube and Cone Filter for sale. £110
Finally Part 2! I will also have a heatwrapped 50mm (2") decat up pipe £70
Collection or meeting halfway can be arranged or postage at an arranged cost.
Im selling this turbo as ive gone for something different. This is a large standard position GT30 based turbo, not for the faint hearted. This is ideally suited to 2.5 or 2.33 builds or high revving 2.0 builds. This will give you an almighty shove when you hit 4000 rpm and will continue to impale you to the seat until the redline.
With the correct supporting mods this is a 450bhp turbo @ ~1.8bar, My car is running at approx ~400 at 1.55bar and over 400lbft from 4200rpm. My car achieves 1 bar at 3000 rpm on UK heads, with a better setup it may even spool sooner than that too. It has a polished compressor cover and a ported inlet. This is Internally gated so is literally a "BOLT ON" turbo
I has an uprated 1.25bar actuator. This is a 55lb/min turbo so can flow plenty of air if you give it the chance.
£750 o.n.o complete with braided oil line and water lines. (£830 o.n.o with the induction hose below)
This turbo is at present having the cover converted to 3" which means that it will flow even better than is mentionned above!!
I also have a 3" Red Samco "Big Bore" induction hose to complement it. £100
Finally i will also have an RCM 80mm Maf Tube and Cone Filter for sale. £110
Finally Part 2! I will also have a heatwrapped 50mm (2") decat up pipe £70
Collection or meeting halfway can be arranged or postage at an arranged cost.
Last edited by Neilo; 03 January 2007 at 10:23 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM