Ecutec Tek 2
29 March 2007, 10:11 AM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2004
Location: Ashford, Middx
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Ecutec Tek 2
I'm selling my Ecutec Tek 2 ECU upgrade for MY 99-00 cars. It's Ecutek's "off the shelf" ECU, increasing boost, fuel, ignition etc. On my RB5 it made 291bhp with a full decat.
It's the whole box that is in the passenger footwell so you just unplug the original one and plug this one in!
£275.00
Cheers
Jon
It's the whole box that is in the passenger footwell so you just unplug the original one and plug this one in!
£275.00
Cheers
Jon
29 March 2007, 10:50 AM
#2
Scooby Regular
iTrader: (2)
Join Date: May 2006
Location: Fareham, Hants
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Tek2 ECU
HI there.
Could you supply me with the exact details (make, type, etc) of your car and the mods you were running please?
I'm very interested but want to make sure that it would be compatible with my car before going ahead with the purchase.
Also who mapped the ECU?
Many thanks
Ben
Could you supply me with the exact details (make, type, etc) of your car and the mods you were running please?
I'm very interested but want to make sure that it would be compatible with my car before going ahead with the purchase.
Also who mapped the ECU?
Many thanks
Ben
Last edited by Useless; 29 March 2007 at 10:51 AM. Reason: ...
29 March 2007, 11:00 AM
#3
Scooby Regular
Thread Starter
Join Date: Nov 2004
Location: Ashford, Middx
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
99 Impreza turbo RB5 (no difference to a normal UK car engine wise).
TSL decat downpipe
TSL decat centre section
Prodrive back box
Green panel filter
Andy F TD04 hybrid turbo
It's not a map that is done to a specific car, but an "off the shelf" unit. There's one guy with an RB5 that's running 340bhp with this ECU and the fuelling is still correct for that.
It was supplied by Power Engineering in Uxbridge, where it made 291bhp on the rollers.
Rgds
Jon
TSL decat downpipe
TSL decat centre section
Prodrive back box
Green panel filter
Andy F TD04 hybrid turbo
It's not a map that is done to a specific car, but an "off the shelf" unit. There's one guy with an RB5 that's running 340bhp with this ECU and the fuelling is still correct for that.
It was supplied by Power Engineering in Uxbridge, where it made 291bhp on the rollers.
Rgds
Jon
29 March 2007, 01:12 PM
#4
Scooby Regular
iTrader: (2)
Join Date: May 2006
Location: Fareham, Hants
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Many thanks,
Any idea what the difference is between a standard td04 and the Andy F one?
So if the ecu is an off the shelf item, I'm assuming it is not re-mappable and therefore has not got an open license with it?
Did you buy it new for your car?
Cheers
Ben
Any idea what the difference is between a standard td04 and the Andy F one?
So if the ecu is an off the shelf item, I'm assuming it is not re-mappable and therefore has not got an open license with it?
Did you buy it new for your car?
Cheers
Ben
29 March 2007, 01:36 PM
#5
Scooby Regular
Thread Starter
Join Date: Nov 2004
Location: Ashford, Middx
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
The Andy F's TD04 has a higher flow compressor and housing, so it doesn't run out of boost at higher revs.
I got it from a fellow RB5 owner who got it from Power Engineering and thought that it was "locked". However, when I had it on the rolling road at PE, they said they could custom map it to my car, but there was no point as it was fuelling etc fine.
Hope that helps.
Rgds
Jon
I got it from a fellow RB5 owner who got it from Power Engineering and thought that it was "locked". However, when I had it on the rolling road at PE, they said they could custom map it to my car, but there was no point as it was fuelling etc fine.
Hope that helps.
Rgds
Jon
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM