Phase 2 yellow top 440 injectors.
26 April 2007, 01:42 PM
#1
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: May 2002
Posts: 2,387
Likes: 0
Received 0 Likes
on
0 Posts
Phase 2 yellow top 440 injectors.
Great upgrade from those with 380 phase 2 or phase 1 injectors who are running out of headroom with there fueling. Can be fitted to phase 1 rails with adapters provided from Carl Davey.
Only slight problem is one of the injectors is missing the plastic end cap at the nozzle end. This should make any difference to the running oof the injectors and be even less of an issue if you are using the phase 2 to phase one adapaters.
Looking for £60 delivered for all 4.
Will try and get some pictures up soon.
Only slight problem is one of the injectors is missing the plastic end cap at the nozzle end. This should make any difference to the running oof the injectors and be even less of an issue if you are using the phase 2 to phase one adapaters.
Looking for £60 delivered for all 4.
Will try and get some pictures up soon.
13 May 2007, 09:50 AM
#2
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: May 2002
Posts: 2,387
Likes: 0
Received 0 Likes
on
0 Posts
With regards to end cap missing. This really shouldn't be a concern. The cap is only there to stop the bottom 'O' ring falling off when the injector is out of the rail. When the injector is pushed into the rail its pushes against the bottom 'O' ring and therefore holding firkly in place and can't go anywhere.
If you were using adapters it should be even less of a concern as the adapter pushes over the bottom 'O' ring and holds firmly in place.
Not most re-worked injectors don't even have these caps.
Zen's injectors don't have the plastic caps at all.
http://www.zenperformance.co.uk/cms_...ther/535cc.jpg
Grap yourself a bargain there are normally selling for £110 - £150
Thread
Thread Starter
Forum
Replies
Last Post
bluebullet29
General Technical
9
05 October 2015 02:17 PM