Flamer Kit
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: 2.5 RA
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
I know this will seem abit cheesy to the older (more Mature) ppl on here but i am selling flamer kits if any1 would be interested to keep the cost down if 5 ppl order i can throw them out at £50
Full flamer kit for a single exit exhaust system including everything you will require. Electronic spark module with wiring loom, ignition coil, activation switch, spark plug, HT lead and all fixings.
(note) Flamer kits work by burning unburnt fuel when you de-throttle and the module ignites the fuel as it exits your exhaust system (when the switch on the dash is flicked) For better results we recommend chiping your car or jetting so richer on overrun . (these kits are for display use only and should not be used on any public highway !).
FAQ's
Q: Will it work on my car??
A: The flamer kit will work on any car but it relies on the amount of un-burnt fuel in the exhaust system to ignite and produce a flame. I cannot answer if your car has enough un-burnt fuel.
Q: Do I have to make any major modifications to my car??
A: No you do not you only have to connect two wires and drill a hole the size of a spark plug in the exhaust pipe.
Q: Do you need to do any welding??
A: There is no welding required to fit this kit.
Q: Does this kit squirt petrol into the exhaust??
A: No way !! and don't try it... It ignites the un-burnt fuel in your exhaust system.
Q: Do I need flame proof paint??
A: No you do not.
Full flamer kit for a single exit exhaust system including everything you will require. Electronic spark module with wiring loom, ignition coil, activation switch, spark plug, HT lead and all fixings.
(note) Flamer kits work by burning unburnt fuel when you de-throttle and the module ignites the fuel as it exits your exhaust system (when the switch on the dash is flicked) For better results we recommend chiping your car or jetting so richer on overrun . (these kits are for display use only and should not be used on any public highway !).
FAQ's
Q: Will it work on my car??
A: The flamer kit will work on any car but it relies on the amount of un-burnt fuel in the exhaust system to ignite and produce a flame. I cannot answer if your car has enough un-burnt fuel.
Q: Do I have to make any major modifications to my car??
A: No you do not you only have to connect two wires and drill a hole the size of a spark plug in the exhaust pipe.
Q: Do you need to do any welding??
A: There is no welding required to fit this kit.
Q: Does this kit squirt petrol into the exhaust??
A: No way !! and don't try it... It ignites the un-burnt fuel in your exhaust system.
Q: Do I need flame proof paint??
A: No you do not.
Trending Topics
#10
Scooby Regular
Join Date: Aug 2007
Location: glenrothes,fife
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post