Bailey DV10 dump valve and DEFI Gauges
29 September 2007, 01:32 PM
#1
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
Bailey DV10 dump valve and DEFI Gauges
Hey folks, I have the following bits available
1. Bailey Motorsport DV10 BOV/Dump Valve. Not as complete as I would like. I was told that the Turbosmart BOV I got came with nothing other than the valve itself which I find hard to believe but there you go
. Therefore I have simply the BOV part available. Fully functional, designed for 99/00 Impreza. I have a spare gasket that I will provide with the DV, and will supply the original Samco hose and clips frmon my car from which you can butcher a section of pipe to stick the bung in to that you can get from here: Blanking Plug (Dump Valve) | Dump Valves & Accessories | Demon Tweeks Motorsport, Motorcycle, Modifying, Parts and Accessories I think the 35mm bung would be the best bet. I have the original instructions too that came with the BOV.
Pic HERE
£45 INCLUDING DELIVERY.
-------------------------------------
2. Defi-Link 52MM Turbo Gauge and 60MM Water Temp Gauge with water pipe adaptor. After being told I really should get Defi gauges and nothing else I bought a "complete" 60MM newage Impreza Defi set off Egay. Being Egay, they turned out to be incomplete, a mix of 52MM and 60MM gauges and a dashboard pod that looked like it had broken clips at the front of it...........
Anyway, the end result of it all is that I have a 52MM boost gauge, with all the wiring, a length of boost hose (not pictured) and the T piece (not pictured), a dashboard gauge holder which looks incomplete to me but all the bits to physically plumb it in are present and correct.
The 60MM Water Temp gauge is incomplete as the bundle came with a cut cable where the oil temp probe was supposed to be at the end of..... As I had no interest in the water gauge I used the probe to get my oil temp one working. I have a new age water pipe and sensor holder bit with the gauge but no actual sender (you can buy these from Scoobymania etc to complete it, Part No. PDF03905S). I also have the long cable that connects the control unit to the probe when you buy it but I forgot to put it in the picture.
Pic of the 52MM boost gauge (tubing+T piece not shown)
HERE
Pic of the 60MM Water Temp gauge bundle (connector cable and other jubilee clips not shown)
HERE
*SOLD TO TONE LOC* for the 52MM Boost gauge. £60 INCLUDING DELIVERY for the 60MM Water gauge bundle.
I think that just about covers it. Payment via bank Transfer or Paypal, not fussed.
Cheers,
Nick
.
1. Bailey Motorsport DV10 BOV/Dump Valve. Not as complete as I would like. I was told that the Turbosmart BOV I got came with nothing other than the valve itself which I find hard to believe but there you go
. Therefore I have simply the BOV part available. Fully functional, designed for 99/00 Impreza. I have a spare gasket that I will provide with the DV, and will supply the original Samco hose and clips frmon my car from which you can butcher a section of pipe to stick the bung in to that you can get from here: Blanking Plug (Dump Valve) | Dump Valves & Accessories | Demon Tweeks Motorsport, Motorcycle, Modifying, Parts and Accessories I think the 35mm bung would be the best bet. I have the original instructions too that came with the BOV.Pic HERE
£45 INCLUDING DELIVERY.
-------------------------------------
2. Defi-Link 52MM Turbo Gauge and 60MM Water Temp Gauge with water pipe adaptor. After being told I really should get Defi gauges and nothing else I bought a "complete" 60MM newage Impreza Defi set off Egay. Being Egay, they turned out to be incomplete, a mix of 52MM and 60MM gauges and a dashboard pod that looked like it had broken clips at the front of it...........
Anyway, the end result of it all is that I have a 52MM boost gauge, with all the wiring, a length of boost hose (not pictured) and the T piece (not pictured), a dashboard gauge holder which looks incomplete to me but all the bits to physically plumb it in are present and correct.
The 60MM Water Temp gauge is incomplete as the bundle came with a cut cable where the oil temp probe was supposed to be at the end of..... As I had no interest in the water gauge I used the probe to get my oil temp one working. I have a new age water pipe and sensor holder bit with the gauge but no actual sender (you can buy these from Scoobymania etc to complete it, Part No. PDF03905S). I also have the long cable that connects the control unit to the probe when you buy it but I forgot to put it in the picture.
Pic of the 52MM boost gauge (tubing+T piece not shown)
HERE
Pic of the 60MM Water Temp gauge bundle (connector cable and other jubilee clips not shown)
HERE
*SOLD TO TONE LOC* for the 52MM Boost gauge. £60 INCLUDING DELIVERY for the 60MM Water gauge bundle.
I think that just about covers it. Payment via bank Transfer or Paypal, not fussed.
Cheers,
Nick
.
Last edited by Mr Footlong; 14 October 2007 at 12:02 AM. Reason: Price drops.
Trending Topics
10 October 2007, 10:02 PM
#14
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
I would drop it to £65, no lower I am afraid as I was robbed in the first place and had to buy new gauges on top of that, can't then give this lot away to be honest 
.
.
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
