MY99/00 UK Turbo, Front Bucket Seats
#2
I have a pair of UK Turbo front bucket seats only, in dark blue with light grey panels. Std spec for MY99/00 with the drivers seat height adjustment.
I do not have any other interior trim at all.
They were bought from Andy P on here, but are now surplus to requirements.
See here http://www.scoobynet.co.uk/bbs/threa...threadid=60048
Immaculate condition, £250.
Edited to say I should be able to get them courier delivered to anywhere in the UK for £40, payable by the purchaser obviously.
Or am still willing to drive reasonable distance to meet up and sell.
I am based in the Manchester area.
Cheers MTR
[Edited by MTR - 1/27/2002 9:27:51 AM]
[Edited by MTR - 2/28/2002 7:18:16 PM]
I do not have any other interior trim at all.
They were bought from Andy P on here, but are now surplus to requirements.
See here http://www.scoobynet.co.uk/bbs/threa...threadid=60048
Immaculate condition, £250.
Edited to say I should be able to get them courier delivered to anywhere in the UK for £40, payable by the purchaser obviously.
Or am still willing to drive reasonable distance to meet up and sell.
I am based in the Manchester area.
Cheers MTR
[Edited by MTR - 1/27/2002 9:27:51 AM]
[Edited by MTR - 2/28/2002 7:18:16 PM]
#4
Thanks Mr Cookie.
Just to point out that the seats are unmarked, and the blemishes are due to the poor picture quality, and debris inside the camera creating spots all over the shot.
The picture is of the drivers seat and obviously the passenger seat is the same style.
The gap at the bottom of the back section is because the seat height adjustment is at its lowest position, for those of you who have never seen this type of seat before.
When you adjust it to its highest setting, there is no gap.
Cheers MTR
Just to point out that the seats are unmarked, and the blemishes are due to the poor picture quality, and debris inside the camera creating spots all over the shot.
The picture is of the drivers seat and obviously the passenger seat is the same style.
The gap at the bottom of the back section is because the seat height adjustment is at its lowest position, for those of you who have never seen this type of seat before.
When you adjust it to its highest setting, there is no gap.
Cheers MTR
Trending Topics
#12
Omahasubaru and Merlin8019,
I don't really want to get involved with all the aggravation in trying to ship/air freight or whatever, these seats to America.
It makes the sale become very problematic for myself.
Sorry.
Cheers MTR
I don't really want to get involved with all the aggravation in trying to ship/air freight or whatever, these seats to America.
It makes the sale become very problematic for myself.
Sorry.
Cheers MTR
#16
Scooby Regular
For info, having a MY01 I have done a seat swop on, I was told by Cobra that the mountings for MY01 and MY00< seats ARE different - not a straight swop.
#17
Dave T-S,
Thanks for the info. You cannot trust a word these scrapyards tell you!
I've since been told that the MY01 seat sub frames are different between the 4 door and 5 door MY01's as well.
But who knows.
Cheers MTR
Thanks for the info. You cannot trust a word these scrapyards tell you!
I've since been told that the MY01 seat sub frames are different between the 4 door and 5 door MY01's as well.
But who knows.
Cheers MTR
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM