engine and various bits
07 January 2008, 10:25 AM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
engine and various bits
Closed deck block engine complete. Engine ran but smoked due to ringland damage, didnt knock so bottom end should be sound. It was in a 94 classic mileage unknown (I bought the engine as a project to rebuild to a forged spec but I have since sold my car so its just taking up space in the garage). Engine has got the flywheel attached still and this would be included.
Also with this are 2 spare cylinder heads without cams, so if you want to practice a bit of porting you can do.
Alternator and aircon pump and power steering etc also availble seperately if required, also have a classic wrx steering rack but this would need a hydraulic pipe as that isnt included. Also another std flywheel as well.
Finally some 2 pot calipers from the front of the car (no discs or pads)
I would take £120 for the lot, or make offers for the individual items
Cheers
Also with this are 2 spare cylinder heads without cams, so if you want to practice a bit of porting you can do.
Alternator and aircon pump and power steering etc also availble seperately if required, also have a classic wrx steering rack but this would need a hydraulic pipe as that isnt included. Also another std flywheel as well.
Finally some 2 pot calipers from the front of the car (no discs or pads)
I would take £120 for the lot, or make offers for the individual items
Cheers
Last edited by jaytc2003; 07 January 2008 at 03:03 PM. Reason: forgot something!
Trending Topics
07 January 2008, 10:17 PM
#12
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
Not stripped it down, but indications are that it would need a new piston as the ringland is broken. It would make sense to give the bottom end a total refresh as it would have to be stripped down anyway to fix the damage. As you would need to strip it down it makes sense to use uprated internals so its basically an ideal base for an uprated engine
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM
hedgecutter
General Technical
3
25 September 2015 02:35 PM