***BIG POWER UPGRADES***BARGAIN PRICES****
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
***BIG POWER UPGRADES***BARGAIN PRICES****
Due to a new project I will be getting rid of some of my current engine setup.
All the bits are due to come off mid-end Feb, so get your parts reserved now!
Available for sale is:
FORGED ENGINE
Fully Built by Zen Performance with reciepts to show. Only around 10000 miles since the build and perfect for those who want to achieve their power safely. No excess oil useage and an example of a top quality build by Zen. Would cost well over £3k to build and oil changed every 3k miles since built. Will be inspected to verify condition when taken out.
STI 3 RA Block
Re-bored and honed
92.5mm Wiesco Pistons
Stronger STI 9 Rods
ACL Main Bearings
ACL Big end Bearings
ACL Bearings
Standard crank
Standard STI Sump
SOLD PENDING PAYMENT
STI 3 CAMS
These were the most aggresive Cam setup designed by STI and is the most aggresive you can go bar aftermarket cams. Cheap alternative to Race Cams, and in great nick and an absolute steal!
£275
STI VALVETRAIN
Full Valvetrain from a STI 3 RA, in perfect working order. Once again the best bar aftermarket.
£100
TURBO
Genuine Andy Forrest Performance TD05 18G
Ran at 1.7/1.8 bar producing 418/380 with methanol, and 409/367 on plain V-Power....
Excellent condition and has been custom ported. No oil leaks, no smoking, nothing wrong at all! working perfectly!
Sold pending payment
BRAKING
Compbrake full 17" Race kit. Will fit under any 17" wheel, great value for money kit and comes with Pagid Racing pads. Perfect working order contains:
Compbrake 4 pot Race Calipers - Silver
332x30 Discs
Pagid Racing pad
Braided hoses
Mounting bells etc....
Bargain! £350
COOLING
Full custom STI 9 TMIC Setup with Modified I/C Undertray.
Custom fabricated by Zen to allow the early DV to fit and custom fabricated brackets. Includes everything you need to fit....
SOLD- Deposit Recieved
OTHER
Blitz SUS Induction Kit- Great condition 1996> £60
Blitz Super Sound Dump Valve 1996-1998- Perfect condition. Sold pending payment
H&S 3" Decat Bell mouth Downpipe- Excellent condition comes wrapped- Sold pending payment
Andy Forrest SS Up-Pipe- Wrapped Excellent condition- £70
I have been running this setup for a year now and produced 418/380 at 1.6 bar- It runs 1.8 on the road. This is a setup capable of propelling your car into a mid 11 1/4....
The pull is relentless and the spool up time is amazing and lag is almost non existent.
The car runs beautifully with this setup and the power figures speak for themselves.
This setup would make for the most complete and competitive road based Impreza....
All the bits are due to come off mid-end Feb, so get your parts reserved now!
Available for sale is:
FORGED ENGINE
Fully Built by Zen Performance with reciepts to show. Only around 10000 miles since the build and perfect for those who want to achieve their power safely. No excess oil useage and an example of a top quality build by Zen. Would cost well over £3k to build and oil changed every 3k miles since built. Will be inspected to verify condition when taken out.
STI 3 RA Block
Re-bored and honed
92.5mm Wiesco Pistons
Stronger STI 9 Rods
ACL Main Bearings
ACL Big end Bearings
ACL Bearings
Standard crank
Standard STI Sump
SOLD PENDING PAYMENT
STI 3 CAMS
These were the most aggresive Cam setup designed by STI and is the most aggresive you can go bar aftermarket cams. Cheap alternative to Race Cams, and in great nick and an absolute steal!
£275
STI VALVETRAIN
Full Valvetrain from a STI 3 RA, in perfect working order. Once again the best bar aftermarket.
£100
TURBO
Genuine Andy Forrest Performance TD05 18G
Ran at 1.7/1.8 bar producing 418/380 with methanol, and 409/367 on plain V-Power....
Excellent condition and has been custom ported. No oil leaks, no smoking, nothing wrong at all! working perfectly!
Sold pending payment
BRAKING
Compbrake full 17" Race kit. Will fit under any 17" wheel, great value for money kit and comes with Pagid Racing pads. Perfect working order contains:
Compbrake 4 pot Race Calipers - Silver
332x30 Discs
Pagid Racing pad
Braided hoses
Mounting bells etc....
Bargain! £350
COOLING
Full custom STI 9 TMIC Setup with Modified I/C Undertray.
Custom fabricated by Zen to allow the early DV to fit and custom fabricated brackets. Includes everything you need to fit....
SOLD- Deposit Recieved
OTHER
Blitz SUS Induction Kit- Great condition 1996> £60
Blitz Super Sound Dump Valve 1996-1998- Perfect condition. Sold pending payment
H&S 3" Decat Bell mouth Downpipe- Excellent condition comes wrapped- Sold pending payment
Andy Forrest SS Up-Pipe- Wrapped Excellent condition- £70
I have been running this setup for a year now and produced 418/380 at 1.6 bar- It runs 1.8 on the road. This is a setup capable of propelling your car into a mid 11 1/4....
The pull is relentless and the spool up time is amazing and lag is almost non existent.
The car runs beautifully with this setup and the power figures speak for themselves.
This setup would make for the most complete and competitive road based Impreza....
Last edited by R4LLY; 17 January 2008 at 12:34 AM.
#6
Scooby Regular
iTrader: (1)
Join Date: May 2007
Location: Thetford
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
tried pming but seems your inbox is full again
Really interested in the the H&S downpipe but i dont get paid til 25th hopefully you still have this as i'll defo have it.
Cheers for the reply though
Really interested in the the H&S downpipe but i dont get paid til 25th hopefully you still have this as i'll defo have it.
Cheers for the reply though
Trending Topics
#8
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Inbox now cleared guys.
If you want me to hold it you can pay a 20% deposit and I'll put your name against it.
Graham,
The intercooler will fit straight onto your car. It has already been modified to fit the STI 3/4 Engine bay, and comes with all the modified brackets etc... to act as a direct swap.
If you want me to hold it you can pay a 20% deposit and I'll put your name against it.
Graham,
The intercooler will fit straight onto your car. It has already been modified to fit the STI 3/4 Engine bay, and comes with all the modified brackets etc... to act as a direct swap.
#12
Scooby Regular
Join Date: Oct 2007
Location: Feeding my car's addiction of V Power.
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=R4LLY;7555986]
COOLING
Full custom STI 9 TMIC Setup with Modified I/C Undertray.
Custom fabricated by Zen to allow the early DV to fit and custom fabricated brackets. Includes everything you need to fit....
£200
[QUOTE]
If this is available mid-late feb I'll take it off your hands if Graham hasn't had 1st dibs already.
COOLING
Full custom STI 9 TMIC Setup with Modified I/C Undertray.
Custom fabricated by Zen to allow the early DV to fit and custom fabricated brackets. Includes everything you need to fit....
£200
[QUOTE]
If this is available mid-late feb I'll take it off your hands if Graham hasn't had 1st dibs already.
#14
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Ok AZ, CWT also inquired at the same time as Grahame, so if both fall through then you will be next on the list.
The induction kit is in great nick, and postage will be £10.
Pm's replied to
The induction kit is in great nick, and postage will be £10.
Pm's replied to