Loads of parts 2001 bug eye
11 February 2008, 08:50 PM
#1
Scooby Regular
Thread Starter
Join Date: Apr 2005
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Loads of parts 2001 bug eye
As the post says I have had to break my 2001 bug eye so I have loads of
parts for sale.
It is a 2001 standard wrx in mica blue with 44k miles done.
IF YOU WANT SOMETHING PLEASE SUBMIT A REASONABLE OFFER WITH YOUR PM OR POST. THIS WILL JUST CUT DOWN PMS GOING BACKWARDS AND FORWARDS
all 4 doors (Drivers side has slight creas near the wingmirror but nothing major (Just being honest)
Boot lid
Standard WRX spoiler
Bonnet with standard scoop
Full interior, very good condition with no tears
driver and passenger airbags with airbag module
standard momo steering wheel
back and front bumper (with or without fogs)
4 Alloys (5 spoke 17") with tyres (2 good tread 2 good but outside esge worn). one of the wheels has had a slight repair to the inside rim and there is slight scuffing to the wheels but again nothing bad
rear diff
intercooler
both wings (the bottom of teh nearside is damaged)
centre console (whith gear ****)
cup holder
plastic cover that runs under windscreen where the blowers blow through
centre dash surround (where the radio surround fits into)
front and rear seat belts with pre tensioners
starter motor
alternator
washer reservoir
inlet thing that sits on top of engine and has a metal disc that tilts when the accelerators pressed (As you can see I'm no mechanic
)
speedo 44k miles approx (Fuel gauge doesn't work but light comes on when low)
lcd clock and panel
centre vents
drivers side lower dash panel (where the fog light switches are)
radiator
glovebox
Aircon radiator
air filter housing
Both rear light clusters
Morette style head lights with bulbs (One light has been cracked but still works fine) it was on my car like this for ages and didn't affect anything
turbo
recirculating dump valve
grill
I also have a 7" dvd/TV player, the stereo faci has had to be slightly modified as it is slight wider than standard (the facia will go with it)
Bailey dump valve that I never got round to fitting
and a brand new decat centre section they I never got fitted
PLEASE EMAIL ME ATkarllap@yahoo.co.uk with any queries. I am struggling to keep up with pm's due to the amount I'm getting I'm having to constantly delete some to stop my inbox getting full
Please be sensible and fair with any offers if you do they will be accepted.
parts for sale.
It is a 2001 standard wrx in mica blue with 44k miles done.
IF YOU WANT SOMETHING PLEASE SUBMIT A REASONABLE OFFER WITH YOUR PM OR POST. THIS WILL JUST CUT DOWN PMS GOING BACKWARDS AND FORWARDS
all 4 doors (Drivers side has slight creas near the wingmirror but nothing major (Just being honest)
Boot lid
Standard WRX spoiler
Bonnet with standard scoop
Full interior, very good condition with no tears
driver and passenger airbags with airbag module
standard momo steering wheel
back and front bumper (with or without fogs)
4 Alloys (5 spoke 17") with tyres (2 good tread 2 good but outside esge worn). one of the wheels has had a slight repair to the inside rim and there is slight scuffing to the wheels but again nothing bad
rear diff
intercooler
both wings (the bottom of teh nearside is damaged)
centre console (whith gear ****)
cup holder
plastic cover that runs under windscreen where the blowers blow through
centre dash surround (where the radio surround fits into)
front and rear seat belts with pre tensioners
starter motor
alternator
washer reservoir
inlet thing that sits on top of engine and has a metal disc that tilts when the accelerators pressed (As you can see I'm no mechanic
)speedo 44k miles approx (Fuel gauge doesn't work but light comes on when low)
lcd clock and panel
centre vents
drivers side lower dash panel (where the fog light switches are)
radiator
glovebox
Aircon radiator
air filter housing
Both rear light clusters
Morette style head lights with bulbs (One light has been cracked but still works fine) it was on my car like this for ages and didn't affect anything
turbo
recirculating dump valve
grill
I also have a 7" dvd/TV player, the stereo faci has had to be slightly modified as it is slight wider than standard (the facia will go with it)
Bailey dump valve that I never got round to fitting
and a brand new decat centre section they I never got fitted
PLEASE EMAIL ME ATkarllap@yahoo.co.uk with any queries. I am struggling to keep up with pm's due to the amount I'm getting I'm having to constantly delete some to stop my inbox getting full
Please be sensible and fair with any offers if you do they will be accepted.
Last edited by karllap; 13 February 2008 at 08:52 PM. Reason: change of conatact details
Trending Topics
13 February 2008, 03:07 PM
#13
Scooby Regular
Thread Starter
Join Date: Apr 2005
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
13 February 2008, 08:50 PM
#17
Scooby Regular
Thread Starter
Join Date: Apr 2005
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Do you mean the exterior or interior surounds? and £12 inc p&p for the fog switches.
Could you email me at karllap@yahoo.co.uk with any replies as I am struggling to keep up with pm's due to haveing to delete them to keep my inbox from getting full
13 February 2008, 08:54 PM
#18
Scooby Regular
Thread Starter
Join Date: Apr 2005
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
PLEASE EMAIL ME karllap@yahoo.co.uk with any queries. I am struggling to keep up with pm's due to the amount I'm getting I'm having to constantly delete some to stop my inbox getting full.
Anybody that is waiting for a reply again could you email me as I have probably lost your pm.
Sorry for the messing about but I'm getting hammered with pm's
Anybody that is waiting for a reply again could you email me as I have probably lost your pm.
Sorry for the messing about but I'm getting hammered with pm's
Last edited by karllap; 13 February 2008 at 11:39 PM.
13 February 2008, 09:30 PM
#19
911 C4 pilot
iTrader: (7)
Join Date: Jan 2007
Location: In an Air Cooled Porsche
Posts: 3,578
Likes: 0
Received 0 Likes
on
0 Posts
that email addy doesnt work...
can you email me some pics of the dumpvalve
wibblemonster@dsl.pipex.com
cheers
can you email me some pics of the dumpvalve
wibblemonster@dsl.pipex.com
cheers
17 February 2008, 06:21 PM
#20
Scooby Regular
Thread Starter
Join Date: Apr 2005
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Just to let you all know, I have picke dthe parts up that have been payed for and they will go of in the morning.
I have also took the pics that were requested and I will send them as soon as I find the cable to my camerea.
Thanks
I have also took the pics that were requested and I will send them as soon as I find the cable to my camerea.
Thanks
bttt
19 February 2008, 11:14 PM
#22
Scooby Regular
Thread Starter
Join Date: Apr 2005
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Checked out the interior on the weekend. It is the one with side airbags. It is in very good condition, no rips and no real signs of wear that I can see (it isn't brand new though) It will probably need cleaning as it is being stored in a garage.
21 February 2008, 10:46 PM
#28
Scooby Regular
iTrader: (1)
Join Date: Apr 2007
Location: Up-North Like!
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Silly request but I'd like the little silver plastic cover/dash thingy that sits next to the cup holder above the radio. I'm sure it comes off but not 100% sure
How much delivered?
Thanks,
How much delivered?
Thanks,
21 February 2008, 11:22 PM
#30
Scooby Regular
Thread Starter
Join Date: Apr 2005
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
If you want that you can have it for £20 plus post
Thanks