2 honda cr motocross bikes, 125 and 250
#1
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
i am selling my two crossers,
i have a 1990/91 cr 125 which runs
also a 1995 cr250 which doesnt run!
the 125 runs but would need some slight work as the exhaust has been crudely mated to the rear box, i think it needs a cluch or just adjusting as it wont select 1st gear and just cruches and pulls slightly when the clutch is held in when in 2nd gear.it is rideable in 2nd and above!
the panels are in a fair condition with a few cracks and splits!
i have just fitted a new plug and i think it could do with the carb adjusting properly as i think it runs a little rich?
i have fitted a front brake as the old one was goosed, and changed the rear wheel as the person before me managed to shear the sprocket from the hub, i have a spare front wheel to go with it too!
i have also fitted a new clutch cable as i thought it was the cause of the clutch slip?
the bike has a pair of renthal bars, and a new clutch lever and stantion. this bike could do with a new gearbox gasket, the rubber band type one under the side plastic cover clutch side!
![](http://i2.photobucket.com/albums/y39/london_chris/DSC02432.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/DSC02433.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/DSC02434.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/DSC02435.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/DSC02436.jpg)
the 250, i bought this with all good intentions of getting it running again and ragging the life out of it, but due to now being unemployed i have the time but no money,
it is as far as i am aware a 1995 model and is in good condtion, there are a few cracks on plastics, but nothing a few screws and washers and glue couldnt sort!
the engine is in bits along with the gearbox, there are two sets of gears in the box as the box wasnt changing gear properly, one of the shafts is visbly bent but there is another straight one in there too! all selector forks, and gears are present along with, a new piston, a new small end bearing, and all the other bits that need to be put back together again! this bike also have renthal bars, and there is also a haynes manual for both bikes(one manual) a few spares and a pro circuit downpipe.
![](http://i2.photobucket.com/albums/y39/london_chris/Image033.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image034.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image035-1.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image036-1.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image037-1.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image038-1.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image039-1.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image040-1.jpg)
i am looking for around the £800 mark for both but will listen to offers, please feel free to contact me and i will try to answer any more questions!
i am in dorking in surrey and the bikes would need to be collected as i no longer have a van!
i have a 1990/91 cr 125 which runs
also a 1995 cr250 which doesnt run!
the 125 runs but would need some slight work as the exhaust has been crudely mated to the rear box, i think it needs a cluch or just adjusting as it wont select 1st gear and just cruches and pulls slightly when the clutch is held in when in 2nd gear.it is rideable in 2nd and above!
the panels are in a fair condition with a few cracks and splits!
i have just fitted a new plug and i think it could do with the carb adjusting properly as i think it runs a little rich?
i have fitted a front brake as the old one was goosed, and changed the rear wheel as the person before me managed to shear the sprocket from the hub, i have a spare front wheel to go with it too!
i have also fitted a new clutch cable as i thought it was the cause of the clutch slip?
the bike has a pair of renthal bars, and a new clutch lever and stantion. this bike could do with a new gearbox gasket, the rubber band type one under the side plastic cover clutch side!
![](http://i2.photobucket.com/albums/y39/london_chris/DSC02432.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/DSC02433.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/DSC02434.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/DSC02435.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/DSC02436.jpg)
the 250, i bought this with all good intentions of getting it running again and ragging the life out of it, but due to now being unemployed i have the time but no money,
it is as far as i am aware a 1995 model and is in good condtion, there are a few cracks on plastics, but nothing a few screws and washers and glue couldnt sort!
the engine is in bits along with the gearbox, there are two sets of gears in the box as the box wasnt changing gear properly, one of the shafts is visbly bent but there is another straight one in there too! all selector forks, and gears are present along with, a new piston, a new small end bearing, and all the other bits that need to be put back together again! this bike also have renthal bars, and there is also a haynes manual for both bikes(one manual) a few spares and a pro circuit downpipe.
![](http://i2.photobucket.com/albums/y39/london_chris/Image033.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image034.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image035-1.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image036-1.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image037-1.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image038-1.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image039-1.jpg)
![](http://i2.photobucket.com/albums/y39/london_chris/Image040-1.jpg)
i am looking for around the £800 mark for both but will listen to offers, please feel free to contact me and i will try to answer any more questions!
i am in dorking in surrey and the bikes would need to be collected as i no longer have a van!
#4
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
hi mate
please my boss has got his kids into motor crossing last year as he used to do it in the states.
io know he has beenm looking at getting himself back in to it himself i will pass on these details to him he might have both as his kid will need an upgrade
will let you know later today
steve
please my boss has got his kids into motor crossing last year as he used to do it in the states.
io know he has beenm looking at getting himself back in to it himself i will pass on these details to him he might have both as his kid will need an upgrade
will let you know later today
steve
#6
Scooby Regular
Join Date: Sep 2005
Location: feltham,middlesex
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
![Smile](https://www.scoobynet.com/images/icons/icon7.gif)
hi m8 iam local to you in sutton iam interested in talking to you about bikes please email me your tell number at jcanmustafa@yahoo.co.uk
or call me on 07947158334 thanks m8
or call me on 07947158334 thanks m8
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM