Perrin parallel fuel rail and 792cc injectors
#1
Scooby Regular
Thread Starter
Perrin parallel fuel rail and 792cc injectors
Perrin side feed parallel fuel rails with 792cc perrin modified side feed injectors.
Pictures of what the injectors look like are here (that link says 816 cc injectors, these have been flow tested at 792cc)
STi & WRX Performance Parts: Perrin Fuel Injectors (816cc), Side Feed 2004-2006 STi
the rails are designed for a USDM sti 2004-2007. I believe the injectors look like phase 2 injectors but am no expert so if you need this verifying please tell me what to look for/what pictres to take and I'll hapily do so.
I bought these from the states 12 months ago for a project that never went ahead.
The origional words in the advert on nasioc were:
Perrin side feed fuel rails – have about 6000 miles on them. No problems with them.
Perrin side feed modded fuel injectors – have about 6000 miles on them. When I had them modded, I also had them flowed, but I don't have the flow sheet anymore. All four of them were 792cc. No problems with them.
Used both of these with my Perrin 35R kit without issues. I ran out of injector at 25psi on 94 octane pump gas and had low 90% IDC's on 33psi and Cam2 114 leaded race gas.
Price: £300 for rails with injectors + P&P.
Pictures of what the injectors look like are here (that link says 816 cc injectors, these have been flow tested at 792cc)
STi & WRX Performance Parts: Perrin Fuel Injectors (816cc), Side Feed 2004-2006 STi
the rails are designed for a USDM sti 2004-2007. I believe the injectors look like phase 2 injectors but am no expert so if you need this verifying please tell me what to look for/what pictres to take and I'll hapily do so.
I bought these from the states 12 months ago for a project that never went ahead.
The origional words in the advert on nasioc were:
Perrin side feed fuel rails – have about 6000 miles on them. No problems with them.
Perrin side feed modded fuel injectors – have about 6000 miles on them. When I had them modded, I also had them flowed, but I don't have the flow sheet anymore. All four of them were 792cc. No problems with them.
Used both of these with my Perrin 35R kit without issues. I ran out of injector at 25psi on 94 octane pump gas and had low 90% IDC's on 33psi and Cam2 114 leaded race gas.
Price: £300 for rails with injectors + P&P.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
jobegold@hotmail.co.uk
ScoobyNet General
2
27 September 2015 09:44 PM
hedgecutter
General Technical
3
25 September 2015 02:35 PM