RC 3D Helicopter ***Hirobo Freya x-Spec 90 + LOTS MORE***
#1
RC 3D Helicopter ***Hirobo Freya x-Spec 90 + LOTS MORE***
Due to unforseen circumstances ive had my heli a year now and ive not had the chance to fly her once. Shes all mint and ready to go with a whole load of new unopened parts.
Ive got a complete kit ready to go inc, Heli, OS91 C spec, Youngblood pipe, full Futaba radio, flightcase, as new Futaba FF9 radio (only used for flight sim), Dynatron thats not even been out of the box, spare carbon x-spec airframe, spare CCPM rotor head, spare canopy, Phoenix RC sim etc and LOTS more.
Way too many parts to list!!
£££'s spent and 90% of it has never been used.
I need to sell the lot.
Anyone looking for a complete 90 setup ready to go?
I can post full details for anyone who is seriously interested. All this kit is in mint condition, new or as new.
PM me for serious enquiries
Photo is not mine, but identical
Ive got a complete kit ready to go inc, Heli, OS91 C spec, Youngblood pipe, full Futaba radio, flightcase, as new Futaba FF9 radio (only used for flight sim), Dynatron thats not even been out of the box, spare carbon x-spec airframe, spare CCPM rotor head, spare canopy, Phoenix RC sim etc and LOTS more.
Way too many parts to list!!
£££'s spent and 90% of it has never been used.
I need to sell the lot.
Anyone looking for a complete 90 setup ready to go?
I can post full details for anyone who is seriously interested. All this kit is in mint condition, new or as new.
PM me for serious enquiries
Photo is not mine, but identical
Last edited by frayz; 30 September 2008 at 05:56 PM.
#6
Due to unforseen circumstances ive had my heli a year now and ive not had the chance to fly her once. Shes all mint and ready to go with a whole load of new unopened parts.
Ive got a complete kit ready to go inc, Heli, OS91 C spec, Youngblood MP2 pipe, full Futaba radio, flightcase, as new Futaba FF9 radio (only used for flight sim), Dynatron thats not even been out of the box, spare carbon x-spec airframe, spare CCPM rotor head, spare canopy, Phoenix RC sim etc and LOTS more.
Way too many parts to list!!
£££'s spent and 90% of it has never been used.
I need to sell the lot.
Anyone looking for a complete 90 setup ready to go?
I can post full details for anyone who is seriously interested. All this kit is in mint condition, new or as new.
PM me for serious enquiries
Photo is not mine but identical.
Hirobo Freya X-Spec. Approx 4 hours flight
All X-Spec upgrades inc
Full original Hirobo ECCPM setup with metal head upgrade
Full carbon airframe
Full carbon push/pull upgrade
Delrin gears
Carbon fin set
Carbon pushrods
3D header tank setup
Nicad pack with battery level indicator
OS91 C-Spec engine - perfect tune and well serviced with low hours - The O.S. .91 C-spec engine was selected to provide the heli with plenty of power. The O.S. .91 was released recently, was in a more powerful version with a built-in fuel pump to supply fuel in a steady flow under all conditions. The engine produced 3.1 horsepower at 15,000 rpm, and it has proven an extremely powerful and reliable performer.
Curtis Youngblood MP2 – Probably the best and most powerful pipe available for a 90 motor
Futaba GY-601 Gyro with matching S-9251 digital servo - Probably the finest helicopter gyro available, the Futaba GY-601 was designed for FAI competition flying, and has both FAI and 3D flying modes. The gyro can be operated in either normal or heading hold mode, with a high number of user adjustable parameters in order to match the gyro to your helicopter and your preferred flight profile
Futaba FF9 (II) Transmitter – Beautiful revised version of the original FF9. Only used to fly on my PC simulator so in as new condition.
All servos are Futaba 9252 digitals. These are some of the finest servos you can buy and all with very low hours. RX is Futaba 149.
SAB 680 carbon main blades, stock X-Spec tails
Revlock 10 Guvernor
Brand new Sullivan Dynatron Starter
Brand new Robbie “one-way” starting wand
Brand new flight case
Brand new Fuel pump
Brand new fuel fittings for fuel bottle
Brand new ball cup pliers
Phoenic RC simulator with Futaba dongle, ready to go.
Spares inc Full spare carbon X-Spec airframe, Original Hirobo canopy, Ally CCPM rotorhead, Spare Youngblood MP2 (Small dent in it), delrin gears, finsets, boom, graphics, … lots more inc too.
All parts supplied by Bob at Skyline Models
This model heli is a stunning spec and anyone that knows helis knows how good this is. Yes there are cheaper out there but none will come close to the Hirbo quality.
£1200 takes the lot
Ive got a complete kit ready to go inc, Heli, OS91 C spec, Youngblood MP2 pipe, full Futaba radio, flightcase, as new Futaba FF9 radio (only used for flight sim), Dynatron thats not even been out of the box, spare carbon x-spec airframe, spare CCPM rotor head, spare canopy, Phoenix RC sim etc and LOTS more.
Way too many parts to list!!
£££'s spent and 90% of it has never been used.
I need to sell the lot.
Anyone looking for a complete 90 setup ready to go?
I can post full details for anyone who is seriously interested. All this kit is in mint condition, new or as new.
PM me for serious enquiries
Photo is not mine but identical.
Hirobo Freya X-Spec. Approx 4 hours flight
All X-Spec upgrades inc
Full original Hirobo ECCPM setup with metal head upgrade
Full carbon airframe
Full carbon push/pull upgrade
Delrin gears
Carbon fin set
Carbon pushrods
3D header tank setup
Nicad pack with battery level indicator
OS91 C-Spec engine - perfect tune and well serviced with low hours - The O.S. .91 C-spec engine was selected to provide the heli with plenty of power. The O.S. .91 was released recently, was in a more powerful version with a built-in fuel pump to supply fuel in a steady flow under all conditions. The engine produced 3.1 horsepower at 15,000 rpm, and it has proven an extremely powerful and reliable performer.
Curtis Youngblood MP2 – Probably the best and most powerful pipe available for a 90 motor
Futaba GY-601 Gyro with matching S-9251 digital servo - Probably the finest helicopter gyro available, the Futaba GY-601 was designed for FAI competition flying, and has both FAI and 3D flying modes. The gyro can be operated in either normal or heading hold mode, with a high number of user adjustable parameters in order to match the gyro to your helicopter and your preferred flight profile
Futaba FF9 (II) Transmitter – Beautiful revised version of the original FF9. Only used to fly on my PC simulator so in as new condition.
All servos are Futaba 9252 digitals. These are some of the finest servos you can buy and all with very low hours. RX is Futaba 149.
SAB 680 carbon main blades, stock X-Spec tails
Revlock 10 Guvernor
Brand new Sullivan Dynatron Starter
Brand new Robbie “one-way” starting wand
Brand new flight case
Brand new Fuel pump
Brand new fuel fittings for fuel bottle
Brand new ball cup pliers
Phoenic RC simulator with Futaba dongle, ready to go.
Spares inc Full spare carbon X-Spec airframe, Original Hirobo canopy, Ally CCPM rotorhead, Spare Youngblood MP2 (Small dent in it), delrin gears, finsets, boom, graphics, … lots more inc too.
All parts supplied by Bob at Skyline Models
This model heli is a stunning spec and anyone that knows helis knows how good this is. Yes there are cheaper out there but none will come close to the Hirbo quality.
£1200 takes the lot
#7
£1200...........................................Wo w I bought my little tiwain'es rechargable electric jobbie off ebay for £15
I'm sure its a very impressive bit of kit, and to someone in the know its probably a bargain, and one hell of a toy but blimey.! £1200 for a RC heli. :shock:
Nice toy though.
I'm sure its a very impressive bit of kit, and to someone in the know its probably a bargain, and one hell of a toy but blimey.! £1200 for a RC heli. :shock:
Nice toy though.
Trending Topics
#8
Dude, this is an X-spec. Anyone in the know willknow just how good these are. All the kit onit is the best of the best too.
Spares inc another complete carbon airframe and a CCPM ally rotorhead.
All this kit has cost me thousands. I think £1200 is very fair for whats included. Im open to a good sensible offer too.
Spares inc another complete carbon airframe and a CCPM ally rotorhead.
All this kit has cost me thousands. I think £1200 is very fair for whats included. Im open to a good sensible offer too.
#9
911 C4 pilot
iTrader: (7)
Join Date: Jan 2007
Location: In an Air Cooled Porsche
Posts: 3,578
Likes: 0
Received 0 Likes
on
0 Posts
£1200...........................................Wo w I bought my little tiwain'es rechargable electric jobbie off ebay for £15
I'm sure its a very impressive bit of kit, and to someone in the know its probably a bargain, and one hell of a toy but blimey.! £1200 for a RC heli. :shock:
Nice toy though.
I'm sure its a very impressive bit of kit, and to someone in the know its probably a bargain, and one hell of a toy but blimey.! £1200 for a RC heli. :shock:
Nice toy though.
Free bump for ya Frayz, if I had the spare cash I'd buy it.
#14
Scooby Regular
iTrader: (1)
Join Date: Mar 2005
Location: In RS land......
Posts: 12,902
Likes: 0
Received 0 Likes
on
0 Posts
Found it
Futaba FF9 (II) Transmitter – Beautiful revised version of the original FF9. Only used to fly on my PC simulator so in as new condition
Thread
Thread Starter
Forum
Replies
Last Post