Possibly Breaking PPG - 2.35 - 550bhp Impreza
07 October 2008, 11:23 AM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2004
Location: Dublin
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Possibly Breaking PPG - 2.35 - 550bhp Impreza
Strongly considering breaking this up now so if anyone is interested in anything drop me a PM.
The price is £12500 for the whole car.
SPECIFICATION
2.35 Bottom End
Closed Deck Block Bored + Honed with piston squirters relinered and modified to take the Phase 2 Crank.
Complete Engine
79mm Stroke CrankshaftWiseco Stroker Pistons.Custom Crower Con-rods.ACL Race Series Bearings.Cometic Head Gaskets.ARP Head Stud Kit.Modified Oil Pump.Baffled Sump.Ported + Polished Ver 6 STi Heads.Supertech One Piece Inlet Valves.Supertech Inconel Exhaust Valves.Brand New Idlers Tensioner etcUprated Power Enterprise Kevlar Timing Belt.
Custom Reversed Inlet Manifold.
Lateral Front Mount Intercooler / Radiator Kit.
HKS Dumpvalve fitted to pipework
Tuffnol Inlet Manifold Spacers.
Custom Intercooler Pipe work.
Mocal Oil Cooler Kit
GT35R Turbocharger with .82 housing.
Tial 44mm External Wastegate with Screamer Pipe.
Rotated Downpipe + Upipe
3” Exhaust System
GT Spec Headers + Uppipe Wrapped.
100mm Spun Aluminium Trumpet + Cone Filter with Samco Intake.
SimTek ECU with Antilag and Launch Control.
3 Port Boost Solonoid.
AEM 3 Bar Map Sensor.
740cc Injectors.
Modified Parallel Fuel Rails.
Fuelab Fuel Pressure Regulator Kit
Bosch Motorsport Fuel pump
Goodridge Hosing + Fittings
Drivetrain
5 Speed PPG Straight Cut Gear Kit
Billet Selector Forks
Exedy Hyper Twinplate Clutch & Integral flywheel
Suspension
Tein Flex Coilovers
Whiteline anti roll bars
Whiteline Anti Lift Kit
Brakes and Wheels
AP Racing 6 Pot Calipers + Discs Ferodo DS 2500 PadsAP Braided Brake Lines
Ultralite G-Grid 17" Rims Gold with Toyo Tyres
The price is £12500 for the whole car.
SPECIFICATION
2.35 Bottom End
Closed Deck Block Bored + Honed with piston squirters relinered and modified to take the Phase 2 Crank.
Complete Engine
79mm Stroke CrankshaftWiseco Stroker Pistons.Custom Crower Con-rods.ACL Race Series Bearings.Cometic Head Gaskets.ARP Head Stud Kit.Modified Oil Pump.Baffled Sump.Ported + Polished Ver 6 STi Heads.Supertech One Piece Inlet Valves.Supertech Inconel Exhaust Valves.Brand New Idlers Tensioner etcUprated Power Enterprise Kevlar Timing Belt.
Custom Reversed Inlet Manifold.
Lateral Front Mount Intercooler / Radiator Kit.
HKS Dumpvalve fitted to pipework
Tuffnol Inlet Manifold Spacers.
Custom Intercooler Pipe work.
Mocal Oil Cooler Kit
GT35R Turbocharger with .82 housing.
Tial 44mm External Wastegate with Screamer Pipe.
Rotated Downpipe + Upipe
3” Exhaust System
GT Spec Headers + Uppipe Wrapped.
100mm Spun Aluminium Trumpet + Cone Filter with Samco Intake.
SimTek ECU with Antilag and Launch Control.
3 Port Boost Solonoid.
AEM 3 Bar Map Sensor.
740cc Injectors.
Modified Parallel Fuel Rails.
Fuelab Fuel Pressure Regulator Kit
Bosch Motorsport Fuel pump
Goodridge Hosing + Fittings
Drivetrain
5 Speed PPG Straight Cut Gear Kit
Billet Selector Forks
Exedy Hyper Twinplate Clutch & Integral flywheel
Suspension
Tein Flex Coilovers
Whiteline anti roll bars
Whiteline Anti Lift Kit
Brakes and Wheels
AP Racing 6 Pot Calipers + Discs Ferodo DS 2500 PadsAP Braided Brake Lines
Ultralite G-Grid 17" Rims Gold with Toyo Tyres
Last edited by renno rannes; 07 October 2008 at 11:26 AM.
07 October 2008, 12:33 PM
#5
Scooby Regular
iTrader: (1)
Join Date: Oct 2004
Location: Half way up
Posts: 4,791
Likes: 0
Received 0 Likes
on
0 Posts
Awesome spec..
Are you planning on selling the 2.35 CD block separately (as you've listed it separately
)..?
If so, how much..?
I presume I'm wrong, as it would be a shame to break open such a high spec motor..
Does the oil cooler feed from a sandwich plate..? Might be interested if you end up splitting that far..
Are you planning on selling the 2.35 CD block separately (as you've listed it separately
)..?If so, how much..?
I presume I'm wrong, as it would be a shame to break open such a high spec motor..
Does the oil cooler feed from a sandwich plate..? Might be interested if you end up splitting that far..
Trending Topics
07 October 2008, 09:45 PM
#13
Scooby Regular
Thread Starter
Join Date: Aug 2004
Location: Dublin
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Some of the below is now sold pending payment.
Complete Engine
2.35 Bottom End
Closed Deck Block Bored + Honed with piston squirters relinered and modified to take the Phase 2 Crank.
79mm Stroke CrankshaftWiseco Stroker Pistons.Custom Crower Con-rods.ACL Race Series Bearings.Cometic Head Gaskets.ARP Head Stud Kit.Modified Oil Pump.Baffled Sump.Ported & Polished Ver 6 STi Heads.Supertech One Piece Inlet Valves.Supertech Inconel Exhaust Valves.Brand New Idlers Tensioner etcUprated Power Enterprise Kevlar Timing Belt.
Custom Reversed Inlet Manifold.
Lateral Front Mount Intercooler / Radiator Kit. SOLD
HKS Dumpvalve fitted to pipework SOLD
Tuffnol Inlet Manifold Spacers.
Custom Intercooler Pipe work. SOLD
Mocal Oil Cooler Kit
GT35R Turbocharger with .82 housing. SOLD
Tial 44mm External Wastegate with Screamer Pipe. SOLD
Rotated Downpipe + Upipe SOLD
3” Exhaust System
GT Spec Headers + Uppipe Wrapped.
100mm Spun Aluminium Trumpet + Cone Filter with Samco Intake. SOLD
SimTek ECU with Antilag and Launch Control.
3 Port Boost Solonoid.
AEM 3 Bar Map Sensor.
740cc Injectors.
Modified Parallel Fuel Rails.
Fuelab Fuel Pressure Regulator Kit
Bosch Motorsport Fuel pump
Goodridge Hosing + Fittings
SOLD
Drivetrain
5 Speed PPG Straight Cut Gear Kit
Billet Selector Forks
Exedy Hyper Twinplate Clutch & Integral flywheel SOLD
Suspension
Tein Flex Coilovers
Whiteline anti roll bars
Whiteline Anti Lift Kit
SOLD
Brakes and Wheels
AP Racing 6 Pot Calipers + Discs Ferodo DS 2500 PadsAP Braided Brake Lines SOLD
Ultralite G-Grid 17" Rims Gold with Toyo Tyres
Complete Engine
2.35 Bottom End
Closed Deck Block Bored + Honed with piston squirters relinered and modified to take the Phase 2 Crank.
79mm Stroke CrankshaftWiseco Stroker Pistons.Custom Crower Con-rods.ACL Race Series Bearings.Cometic Head Gaskets.ARP Head Stud Kit.Modified Oil Pump.Baffled Sump.Ported & Polished Ver 6 STi Heads.Supertech One Piece Inlet Valves.Supertech Inconel Exhaust Valves.Brand New Idlers Tensioner etcUprated Power Enterprise Kevlar Timing Belt.
Custom Reversed Inlet Manifold.
Lateral Front Mount Intercooler / Radiator Kit. SOLD
HKS Dumpvalve fitted to pipework SOLD
Tuffnol Inlet Manifold Spacers.
Custom Intercooler Pipe work. SOLD
Mocal Oil Cooler Kit
GT35R Turbocharger with .82 housing. SOLD
Tial 44mm External Wastegate with Screamer Pipe. SOLD
Rotated Downpipe + Upipe SOLD
3” Exhaust System
GT Spec Headers + Uppipe Wrapped.
100mm Spun Aluminium Trumpet + Cone Filter with Samco Intake. SOLD
SimTek ECU with Antilag and Launch Control.
3 Port Boost Solonoid.
AEM 3 Bar Map Sensor.
740cc Injectors.
Modified Parallel Fuel Rails.
Fuelab Fuel Pressure Regulator Kit
Bosch Motorsport Fuel pump
Goodridge Hosing + Fittings
SOLD
Drivetrain
5 Speed PPG Straight Cut Gear Kit
Billet Selector Forks
Exedy Hyper Twinplate Clutch & Integral flywheel SOLD
Suspension
Tein Flex Coilovers
Whiteline anti roll bars
Whiteline Anti Lift Kit
SOLD
Brakes and Wheels
AP Racing 6 Pot Calipers + Discs Ferodo DS 2500 PadsAP Braided Brake Lines SOLD
Ultralite G-Grid 17" Rims Gold with Toyo Tyres
08 October 2008, 08:35 AM
#19
Scooby Regular
iTrader: (5)
Join Date: Mar 2003
Location: Aberdeen, White Classic Wagon, 6-Speed, Track Car
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
How many rows is the Mocal Oil Cooler? Where was it mounted in the car? Is it the sandwich plate type feed?
Finally, How much would you like for it?
PM if you want.
Cheers
James
How many rows is the Mocal Oil Cooler? Where was it mounted in the car? Is it the sandwich plate type feed?
Finally, How much would you like for it?
PM if you want.
Cheers
James
16 October 2008, 10:16 AM
#27
Scooby Regular
Thread Starter
Join Date: Aug 2004
Location: Dublin
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
