V3 STI Heads
#1
Scooby Regular
Thread Starter
Join Date: Jun 2008
Location: Essex
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
V3 STI Heads
As above fully ported, inconell exhaust valves, piper race cams complete with buckets and shims springs, ect,these are perfect condition done 800 miles since full rebuild they do not rattle or tap badly when running but not as quiet as stock as the cam profile is quiet agressive,
The ONLY reason they are for sale is the engine is now going in a newage so later heads will make this easier,
£1400
V1 intake manifold complete with throttle body ect £100 or free with above heads although it was never run on these heads,
Excedy single plate ceramic paddle clutch 800 miles only,
like new £350
Also for sale
Tracktive solutions Track day special full exhaust with cat, ok for over 500 hp
perfect condition
£600
Owen Subaru 475+ bhp Garrett Ball BearingTurbo OD1711
Designed and developed by Owen Developments. It is an increased volume cast turbine housing with solid billet inconel wastegate assembly which fits standard Subaru manifold and downpipe and incorporates the Garrett Ball Bearing Cartridge range. Most suited to very highly tuned 2 ltr, 2.2 ltr and 2.5 ltr engine conversions. Supplied with 1.2 bar actuator setting. This turbo is capable of upto and beyond 475 bhp depending on engine specification. New its £1275+vat
this turbo is 1 year old not many miles never tracked VGC
£800
Simtec ECU from V3 classic fitted by JGM
standard engine back in the car
anti lag/launch controll
£600
The ONLY reason they are for sale is the engine is now going in a newage so later heads will make this easier,
£1400
V1 intake manifold complete with throttle body ect £100 or free with above heads although it was never run on these heads,
Excedy single plate ceramic paddle clutch 800 miles only,
like new £350
Also for sale
Tracktive solutions Track day special full exhaust with cat, ok for over 500 hp
perfect condition
£600
Owen Subaru 475+ bhp Garrett Ball BearingTurbo OD1711
Designed and developed by Owen Developments. It is an increased volume cast turbine housing with solid billet inconel wastegate assembly which fits standard Subaru manifold and downpipe and incorporates the Garrett Ball Bearing Cartridge range. Most suited to very highly tuned 2 ltr, 2.2 ltr and 2.5 ltr engine conversions. Supplied with 1.2 bar actuator setting. This turbo is capable of upto and beyond 475 bhp depending on engine specification. New its £1275+vat
this turbo is 1 year old not many miles never tracked VGC
£800
Simtec ECU from V3 classic fitted by JGM
standard engine back in the car
anti lag/launch controll
£600
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Car Parts For Sale
1
18 November 2015 07:49 AM