NEWLY BUILT FORGED SHORT ENGINE..!!!!!!
17 February 2009, 07:34 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
NEWLY BUILT FORGED SHORT ENGINE..!!!!!!
I HAVE FOR SALE A NEWLY BUILT FORGED SHORT MOTOR
SPEC AS FOLLOW:
P1 SEMI CLOSED DECK BLOCK HAD DONE 40K
BLOCK BORED TO SUIT PISTONS
CP FORGED PISTONS AND RINGS 92.5MM (NEW)
EAGLE FORGED H BEAM RODS WITH ARP 3/8 BIG END BOLTS (NEW)
ACL RACE MAIN AND BIG END BEARINGS (NEW)
RCM MODIFIED OIL PUMP (NEW)
STI 7 LIGHTENED AND BALANCED CRANK SHAFT
SUMP AND OIL PICKUP ALSO FITTED
BUILT BY PROFFESIONAL ENGINE BUILDER WHO BUILDS ALOT OF THESE.
SPEC IS CAPABLE OF 400-500 BHP WITH SUPPORTING MODS
I HAVE FULL PICTURE FILE OF BUILD AND PARTS - IF YOU SUPPLY EMAIL ADDRESS I CAN SEND THEM.
PRICE IS £1995
SPEC AS FOLLOW:
P1 SEMI CLOSED DECK BLOCK HAD DONE 40K
BLOCK BORED TO SUIT PISTONS
CP FORGED PISTONS AND RINGS 92.5MM (NEW)
EAGLE FORGED H BEAM RODS WITH ARP 3/8 BIG END BOLTS (NEW)
ACL RACE MAIN AND BIG END BEARINGS (NEW)
RCM MODIFIED OIL PUMP (NEW)
STI 7 LIGHTENED AND BALANCED CRANK SHAFT
SUMP AND OIL PICKUP ALSO FITTED
BUILT BY PROFFESIONAL ENGINE BUILDER WHO BUILDS ALOT OF THESE.
SPEC IS CAPABLE OF 400-500 BHP WITH SUPPORTING MODS
I HAVE FULL PICTURE FILE OF BUILD AND PARTS - IF YOU SUPPLY EMAIL ADDRESS I CAN SEND THEM.
PRICE IS £1995
17 February 2009, 10:33 PM
#5
I HAVE FOR SALE A NEWLY BUILT FORGED SHORT MOTOR
SPEC AS FOLLOW:
P1 SEMI CLOSED DECK BLOCK HAD DONE 40K
BLOCK BORED TO SUIT PISTONS
CP FORGED PISTONS AND RINGS 92.5MM (NEW)
EAGLE FORGED H BEAM RODS WITH ARP 3/8 BIG END BOLTS (NEW)
ACL RACE MAIN AND BIG END BEARINGS (NEW)
RCM MODIFIED OIL PUMP (NEW)
STI 7 LIGHTENED AND BALANCED CRANK SHAFT
SUMP AND OIL PICKUP ALSO FITTED
BUILT BY PROFFESIONAL ENGINE BUILDER WHO BUILDS ALOT OF THESE.
SPEC IS CAPABLE OF 400-500 BHP WITH SUPPORTING MODS
I HAVE FULL PICTURE FILE OF BUILD AND PARTS - IF YOU SUPPLY EMAIL ADDRESS I CAN SEND THEM.
PRICE IS £1995
SPEC AS FOLLOW:
P1 SEMI CLOSED DECK BLOCK HAD DONE 40K
BLOCK BORED TO SUIT PISTONS
CP FORGED PISTONS AND RINGS 92.5MM (NEW)
EAGLE FORGED H BEAM RODS WITH ARP 3/8 BIG END BOLTS (NEW)
ACL RACE MAIN AND BIG END BEARINGS (NEW)
RCM MODIFIED OIL PUMP (NEW)
STI 7 LIGHTENED AND BALANCED CRANK SHAFT
SUMP AND OIL PICKUP ALSO FITTED
BUILT BY PROFFESIONAL ENGINE BUILDER WHO BUILDS ALOT OF THESE.
SPEC IS CAPABLE OF 400-500 BHP WITH SUPPORTING MODS
I HAVE FULL PICTURE FILE OF BUILD AND PARTS - IF YOU SUPPLY EMAIL ADDRESS I CAN SEND THEM.
PRICE IS £1995
[/IMG]
Trending Topics
23 February 2009, 10:08 PM
#10
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
SES IN BOLTON EXCELLENT WITH IMPREZA ENGINES. BUILT LOTS FOR COMPANIES UP HERE, ENGINE CAN BE INSPECTED BY ANYONE BUILD IS EXCELLENT. OBVIOUSLY I HAD THE ENGINE BUILT IM NOT A COMPANY HOW CAN I GIVE WARRANTY, BUT I GUARANTEE WILL STARTUP FINE 100 % IF IT DOESN'T THEY WILL PUT IT RIGHT.
WORKMANSHIP E.T.C GUARANTEED ON ENGINE, BUT ONLY AS FAR AS SHORT MOTOR AS IF NOT BUILT UP AND INSTALLED BY REPUTABLE COMPANY THAT KNOW WHAT THEY ARE DOING ANYTHING COULD BE WRONG TIMING, MAP E.T.C
IVE ALREADY LOST A FORTUNE ON THIS ENGINE AND NEED IT GONE AS DECORATING BABYS ROOM NEXT WEEK ASWELL, I CAN SEEE THE MRS RUNNING TO THE SHOPS ALREADY WITH THE MONEY..!!!
ANY PROBLEMS AT ALL IN THE FIRST 3 MONTHS I WILL TAKE THE ENGINE STRAIGHT BACK TO SES AND IF ITS THEIR FAULT I WILL PUT IT RIGHT HOWS THAT..! I HAVE ALOT OF CONFIDENCE IN THEIR WORK AND NEVER HAD A BAD REPORT
HOPE THIS HELPS
WORKMANSHIP E.T.C GUARANTEED ON ENGINE, BUT ONLY AS FAR AS SHORT MOTOR AS IF NOT BUILT UP AND INSTALLED BY REPUTABLE COMPANY THAT KNOW WHAT THEY ARE DOING ANYTHING COULD BE WRONG TIMING, MAP E.T.C
IVE ALREADY LOST A FORTUNE ON THIS ENGINE AND NEED IT GONE AS DECORATING BABYS ROOM NEXT WEEK ASWELL, I CAN SEEE THE MRS RUNNING TO THE SHOPS ALREADY WITH THE MONEY..!!!
ANY PROBLEMS AT ALL IN THE FIRST 3 MONTHS I WILL TAKE THE ENGINE STRAIGHT BACK TO SES AND IF ITS THEIR FAULT I WILL PUT IT RIGHT HOWS THAT..! I HAVE ALOT OF CONFIDENCE IN THEIR WORK AND NEVER HAD A BAD REPORT
HOPE THIS HELPS
07 March 2009, 09:04 AM
#15
Scooby Regular
iTrader: (9)
Join Date: Apr 2006
Location: Essex
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate can you pm me the following please:
1. Copies of reciepts for all parts and engine build
2. Details of who built the engine so that I can contact them
thanks
1. Copies of reciepts for all parts and engine build
2. Details of who built the engine so that I can contact them
thanks
Thread
Thread Starter
Forum
Replies
Last Post