Scoobyclinic- Newage 3" centre section and backbox
#1
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jul 2007
Location: Guildford Surrey
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
Scoobyclinic- Newage 3" centre section and backbox
SOLD SOLD SOLD
Scoobyclinic true 3" centre section (resonated) and a 4.5" slash cut back box. The centre section is 3" at the down pipe flange and at the back box flange.
This will fit all newages, but not twin scroll.
There is only one small dent on the resonator, all the rest is dent and scratch free.
The exhaust is loudish but no where close to a Nur spec or Apexi.
I would prefer to sell these together, unless there are 2 commited buyers for each part seperately.
£185 delivered.
Scoobyclinic true 3" centre section (resonated) and a 4.5" slash cut back box. The centre section is 3" at the down pipe flange and at the back box flange.
This will fit all newages, but not twin scroll.
There is only one small dent on the resonator, all the rest is dent and scratch free.
The exhaust is loudish but no where close to a Nur spec or Apexi.
I would prefer to sell these together, unless there are 2 commited buyers for each part seperately.
£185 delivered.
Last edited by Brett_555_Sti; 10 March 2009 at 08:43 PM. Reason: revised
#5
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jul 2007
Location: Guildford Surrey
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
I unfortunately do not have a picture of the car it was fitted to.
It was originally fitted to a UK 06 Hawkeye STI.
It will fit all of the above, but make sure your centre section is 1260mm, as this one is.
As above it will not fit JDM twin scroll turbo cars, and the down pipe flange hole centres are the same as the original but obviously you have a larger 3" pipe.
You would be better off getting a decat down pipe anyway.
Last edited by Brett_555_Sti; 05 March 2009 at 06:55 AM.
Trending Topics
#9
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jul 2007
Location: Guildford Surrey
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
In reply to both above, the following can be done and work ok: bolt the 3" to the 2.5" and use a 3" gasket as well as the original graphite one.
OR you can buy this of which many are available, an adapter plate so you get the best of both worlds:
Kakumei 3" ~ 2.5" Exhaust Adaptor Impreza 00-07 Scooby Turbo Subaru Impreza STi WRX Parts Lancer EVO Manifolds Turbo Intercoolers - Flat4online.co.uk
#10
Scooby Regular
Join Date: Jul 2004
Location: OLD MY53 STi @ 341bhp/349lbft -> NOW Evo 8 385bhp/380lbft
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
In reply to both above, the following can be done and work ok: bolt the 3" to the 2.5" and use a 3" gasket as well as the original graphite one.
OR you can buy this of which many are available, an adapter plate so you get the best of both worlds:
Kakumei 3" ~ 2.5" Exhaust Adaptor Impreza 00-07 Scooby Turbo Subaru Impreza STi WRX Parts Lancer EVO Manifolds Turbo Intercoolers - Flat4online.co.uk
OR you can buy this of which many are available, an adapter plate so you get the best of both worlds:
Kakumei 3" ~ 2.5" Exhaust Adaptor Impreza 00-07 Scooby Turbo Subaru Impreza STi WRX Parts Lancer EVO Manifolds Turbo Intercoolers - Flat4online.co.uk
#13
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: Jul 2007
Location: Guildford Surrey
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
It will give all round performance improvement depending on your current state of tune, your ppp exhaust will only be 2.5" AFAIK, it would also help with spool up even more if you fitted a 3" down pipe.
If you are planning further upgrades at a later stage then you will already have an exhaust that will compliment the upgrades even better.
If you are planning further upgrades at a later stage then you will already have an exhaust that will compliment the upgrades even better.
#14
It will give all round performance improvement depending on your current state of tune, your ppp exhaust will only be 2.5" AFAIK, it would also help with spool up even more if you fitted a 3" down pipe.
If you are planning further upgrades at a later stage then you will already have an exhaust that will compliment the upgrades even better.
If you are planning further upgrades at a later stage then you will already have an exhaust that will compliment the upgrades even better.
Might be being a noob but wat is the hole in the out side of the tail pipe for??
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM