Autronics SM2 engine management
13 March 2009, 09:32 PM
#1
Scooby Regular
Thread Starter
iTrader: (61)
Join Date: Aug 2005
Location: N.I
Posts: 3,444
Likes: 0
Received 0 Likes
on
0 Posts
Autronics SM2 engine management
Autronic SM2 engine management complete with seperate CDI interface. Mafless system which was fitted to an Impreza with launch control and anti-lag activated. Obvoiusly will need mapped to suit your mods and with the supporting loom available from Autronics dealers will suit all models and makes up to 8 cylnders. If you have the ability to hardwire the system to your car I do have the plugs for both units.
Ive copied and pasted some info for you.
This is what Autronics summarise the SM2 as:
This model is aimed at the serious racer. With traction control, it is ideal for circuit racing.
The Autronic SM2 Sequential Engine Management System are versatile engine management controls for all engine performance upgrades. Their sophisticated features allow these products to provide performance that rivals even the most expensive European systems costing 3 to 10 times more.
Included are features previously found in Formula 1 level applications, yet this system has the flexibility to be used by the every day engine tuner for almost any high performance upgrade.
A user friendly Windows software program allows the user to select the degree of sophistication required for each application. This program, in combination with intelligence within the management system, allows the user to select the finest calibration detail required to match the application, in absolute minimum of time.
This program provides the means of interrogating the engine management system enabling speedy diagnosis and calibration.
Features:
Sequential operation for 2 to 8 cylinder engines.
Eight injector ouputs.
Four ignition ouputs (ignition expander available for up to 8 outputs)
3D fuel and Ignition maps.
User defined up to 32 RPM and 16 Load sites = 512 sites.
Eight auxiliary outputs other than fuel pump control.
Auxiliary outputs can be defined for boost control, nitrous oxide, staged
injectors, camshaft timing, AC, fan control, idle valve etc...
Traction Control.
Flat Shift. (ver 1.92 & 1.93)
Launch Control. (ver 1.93)
Anti-Lag.
Data Logging.
Available with high current drivers if required.
AutoTune option available.
Compatible with Motec Dash.
Im not really informed enough to ask technical questions but there is aworld of information available through all the decent mappers
£650 ono
Ive copied and pasted some info for you.
This is what Autronics summarise the SM2 as:
This model is aimed at the serious racer. With traction control, it is ideal for circuit racing.
The Autronic SM2 Sequential Engine Management System are versatile engine management controls for all engine performance upgrades. Their sophisticated features allow these products to provide performance that rivals even the most expensive European systems costing 3 to 10 times more.
Included are features previously found in Formula 1 level applications, yet this system has the flexibility to be used by the every day engine tuner for almost any high performance upgrade.
A user friendly Windows software program allows the user to select the degree of sophistication required for each application. This program, in combination with intelligence within the management system, allows the user to select the finest calibration detail required to match the application, in absolute minimum of time.
This program provides the means of interrogating the engine management system enabling speedy diagnosis and calibration.
Features:
Sequential operation for 2 to 8 cylinder engines.
Eight injector ouputs.
Four ignition ouputs (ignition expander available for up to 8 outputs)
3D fuel and Ignition maps.
User defined up to 32 RPM and 16 Load sites = 512 sites.
Eight auxiliary outputs other than fuel pump control.
Auxiliary outputs can be defined for boost control, nitrous oxide, staged
injectors, camshaft timing, AC, fan control, idle valve etc...
Traction Control.
Flat Shift. (ver 1.92 & 1.93)
Launch Control. (ver 1.93)
Anti-Lag.
Data Logging.
Available with high current drivers if required.
AutoTune option available.
Compatible with Motec Dash.
Im not really informed enough to ask technical questions but there is aworld of information available through all the decent mappers
£650 ono
Last edited by scubbay; 13 March 2009 at 09:44 PM. Reason: pics added
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM
