Good spec TIG Welder (AC/DC) - Complete kit
10 May 2009, 11:58 AM
#1
Scooby Regular
Thread Starter
Join Date: Oct 2002
Location: Sussex
Posts: 955
Likes: 0
Received 0 Likes
on
0 Posts
Good spec TIG Welder (AC/DC) - Complete kit
Over £1200 worth of kit for only £700
Portamig TIG 206i AC/DC Welder
Adapter to run of 3pin plug if needed
Regulator for bottle gas
Regulator to run off small bottle gas
2 bottles of disposable argon, 1 full
LEather gloves - good quality
SIP reaction helmet - good quality
Dipping rods for Ali, stainless and mild steel
A few consumables like tungsten tips and tips accessories
Ali sheet/bar
Here are some pics from today of everything included:
3 sheets of 750mm x 450mm x 22mm
Rectancle bars are 1mm long
Portamig TIG 206i - Tech spec:
Inverter range of welding machines
A heavy duty range of professional inverter welding machines designed to give the best performance in the industry.
They all have the following features; 60% duty cycle @ 40 degrees @ maximum output current, very high efficiency so they use less electric than most and all will work from a 13A plug*, excellent welding performance with a very stable and quiet arc, large 35-50mm connectors. The machines are robustly constructed with all internal parts mounted in such a way as to prevent damage caused by small drops which is a common problem with many inverters, the power components are rated to give a large safety margin for the best reliability and importantly these machines are easy to work on and always repairable should a fault occur outside warranty. All models are built to BS EN 60974-1 and are CE marked.
This machine is designed for high quality AC & DC TIG welding & MMA stick welding. The machine is fitted with the following; HF to start the arc, Infinately variable output between 5 and 200 amps, pre & post gas, slope down, torch trigger latching, built in pulser with variable freq, base current & pulse width, true AC squarewave with balance to control arc cleaning & penetration, digital ammeter, arc force on MMA, remote socket for foot control etc.
Technical spec TIG 206i AC DC
Supply voltage 230V 50/60HZ
Fuse (slow blow)* 13/16A
Max no load voltage (OCV) 80V
Duty cycle 200A @ 60%
Size approx 520Lx370Hx320
Weight approx 24KG
Protection IP21
Portamig TIG 206i AC/DC Welder
Adapter to run of 3pin plug if needed
Regulator for bottle gas
Regulator to run off small bottle gas
2 bottles of disposable argon, 1 full
LEather gloves - good quality
SIP reaction helmet - good quality
Dipping rods for Ali, stainless and mild steel
A few consumables like tungsten tips and tips accessories
Ali sheet/bar
Here are some pics from today of everything included:
3 sheets of 750mm x 450mm x 22mm
Rectancle bars are 1mm long
Portamig TIG 206i - Tech spec:
Inverter range of welding machines
A heavy duty range of professional inverter welding machines designed to give the best performance in the industry.
They all have the following features; 60% duty cycle @ 40 degrees @ maximum output current, very high efficiency so they use less electric than most and all will work from a 13A plug*, excellent welding performance with a very stable and quiet arc, large 35-50mm connectors. The machines are robustly constructed with all internal parts mounted in such a way as to prevent damage caused by small drops which is a common problem with many inverters, the power components are rated to give a large safety margin for the best reliability and importantly these machines are easy to work on and always repairable should a fault occur outside warranty. All models are built to BS EN 60974-1 and are CE marked.
This machine is designed for high quality AC & DC TIG welding & MMA stick welding. The machine is fitted with the following; HF to start the arc, Infinately variable output between 5 and 200 amps, pre & post gas, slope down, torch trigger latching, built in pulser with variable freq, base current & pulse width, true AC squarewave with balance to control arc cleaning & penetration, digital ammeter, arc force on MMA, remote socket for foot control etc.
Technical spec TIG 206i AC DC
Supply voltage 230V 50/60HZ
Fuse (slow blow)* 13/16A
Max no load voltage (OCV) 80V
Duty cycle 200A @ 60%
Size approx 520Lx370Hx320
Weight approx 24KG
Protection IP21
Last edited by rb5_336; 10 May 2009 at 12:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
