ESL classic chip 1.1bar 280+ bhp
#1
Scooby Regular
Thread Starter
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
I have an ESL chip (like a scoobyecu) taken from my 1993 classic. Will fit all series 1 and 2 classics with a TD05 Turbo. May require soldering into the ECU depending on if you already have a chip holder on the ECU or not.
Comes with a set of chips mapped to 1.1bar, designed for a decat and aftermarket exhaust and panel filter/inductin kit, good for 280bhp + depending on car and a set of chips mapped for 1.1 bar with 440cc injectors, FMIC as well as the above mods, good for anywhere up to 320bhp with a boost controller according to andy stevens but increse boost at your own risk. Always check lamda and knock when increasing boost.
These maps are very highly regarded, you know you are getting a map from a respected tuner with these chips. Increasingly rare to find these days.
Asking £150 incl delivery, open to any offers.
Comes with a set of chips mapped to 1.1bar, designed for a decat and aftermarket exhaust and panel filter/inductin kit, good for 280bhp + depending on car and a set of chips mapped for 1.1 bar with 440cc injectors, FMIC as well as the above mods, good for anywhere up to 320bhp with a boost controller according to andy stevens but increse boost at your own risk. Always check lamda and knock when increasing boost.
These maps are very highly regarded, you know you are getting a map from a respected tuner with these chips. Increasingly rare to find these days.
Asking £150 incl delivery, open to any offers.
Last edited by borat52; 19 August 2009 at 03:47 PM.
#6
Scooby Regular
Thread Starter
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
This is not remappable. It is the origional ESL chip which was made in the same vein as the scoobyECU.
I do have the 440cc injectors available too. Pictures to follow.
I do have the 440cc injectors available too. Pictures to follow.
Thread
Thread Starter
Forum
Replies
Last Post