Breaking 2.5 Newage.... Goodies..
25 August 2009, 09:02 PM
#1
Scooby Regular
Thread Starter
iTrader: (35)
Join Date: Nov 2006
Posts: 2,784
Likes: 0
Received 0 Likes
on
0 Posts
Breaking 2.5 Newage.... Goodies..Updated list
Made the decision to break my car in several stages.
The car/parts have all done just under 10,000 miles, except the turbo which has covered 3,000.
Engine spec
EJ 257 std engine cases
Lateral performance H section fast road rods
Lateral performance/wiseco hone to fit pistons
ACL bearings
ARP 11mm head studs
Triple layer head gaskets
STi5 heads, fully ported and polished, with re-profiled Piper cams (not sure on the spec, but seem to remember quite mild)
RCM oil pump
Centre breather blocked off.
Long motor was built by Zen with new Crank, modine, water pump etc, and has completed just under 10,000 trouble free miles.
£3300.00
MD 321 V turbo, with rotated compressor wheel (180 degrees) and 3" inlet, though I can convert back to std fitment if required. £1300.00
356mm front and rear brake set up.
These started out as a Ksport kit, which I had machined and anodised in blue.
Fronts are 8 pot, rears 6 pot. £1200.00
Oil cooler kit, with take off plate, and heavy duty long pipework, to allow the routing around the back of the engine, away from the exhaust manifold. £200.00
Whiteline Rear 22mm Anti roll bar £80.00
Whiteline Front 22mm Anti roll bar £80.00
Whiteline rear steel drop links £30.00
Whiteline rear strut brace 80.00
Heavy duty STi 6 speed gearbox mount, and engine mounts £70.00
Lateral Performance modified injectors, top feed, 800cc £250.00
Inlet manifold, fuel rails and parallel fuel lines,all in -6 fittings and braided lines ready to fit £300.00
JDM Defi style instrument cluster, complete with speedo converter £200.00
Recaro speed seats, runners, and rear bench trimmed to match, £1200.00
Flocked dashboard, complete upper and lower sections, glove box, with flocked clock surround, instrument surround and steering column £250.00
2005 on Flocked door cards 100.00
Flocked A, B and C pillars £100.00
Or can do a deal on all the flocked items if interested.
I am advertising on several forums, so to make everything fair can any interested parties e-mail me at neilrobinson05@aol.com
The car/parts have all done just under 10,000 miles, except the turbo which has covered 3,000.
Engine spec
EJ 257 std engine cases
Lateral performance H section fast road rods
Lateral performance/wiseco hone to fit pistons
ACL bearings
ARP 11mm head studs
Triple layer head gaskets
STi5 heads, fully ported and polished, with re-profiled Piper cams (not sure on the spec, but seem to remember quite mild)
RCM oil pump
Centre breather blocked off.
Long motor was built by Zen with new Crank, modine, water pump etc, and has completed just under 10,000 trouble free miles.
£3300.00
MD 321 V turbo, with rotated compressor wheel (180 degrees) and 3" inlet, though I can convert back to std fitment if required. £1300.00
356mm front and rear brake set up.
These started out as a Ksport kit, which I had machined and anodised in blue.
Fronts are 8 pot, rears 6 pot. £1200.00
Oil cooler kit, with take off plate, and heavy duty long pipework, to allow the routing around the back of the engine, away from the exhaust manifold. £200.00
Whiteline Rear 22mm Anti roll bar £80.00
Whiteline Front 22mm Anti roll bar £80.00
Whiteline rear steel drop links £30.00
Whiteline rear strut brace 80.00
Heavy duty STi 6 speed gearbox mount, and engine mounts £70.00
Lateral Performance modified injectors, top feed, 800cc £250.00
Inlet manifold, fuel rails and parallel fuel lines,all in -6 fittings and braided lines ready to fit £300.00
JDM Defi style instrument cluster, complete with speedo converter £200.00
Recaro speed seats, runners, and rear bench trimmed to match, £1200.00
Flocked dashboard, complete upper and lower sections, glove box, with flocked clock surround, instrument surround and steering column £250.00
2005 on Flocked door cards 100.00
Flocked A, B and C pillars £100.00
Or can do a deal on all the flocked items if interested.
I am advertising on several forums, so to make everything fair can any interested parties e-mail me at neilrobinson05@aol.com
Last edited by Neil..; 08 September 2009 at 07:39 PM.
25 August 2009, 09:30 PM
#2
Scooby Regular
iTrader: (23)
Join Date: May 2006
Location: Rota Subzeros FOR sale!
Posts: 3,701
Likes: 0
Received 0 Likes
on
0 Posts
~The blazes you doing Neil!!!
Is it catching after whats the other ones doing?!
lol PM me a price for your wheels and what your doing neil!!!
Ricey
Is it catching after whats the other ones doing?!
lol PM me a price for your wheels and what your doing neil!!!
Ricey
Trending Topics
27 August 2009, 10:03 AM
#14
have you not thought of selling it all complete?
remember reading the tread when this was being built looked an awsome car once complete and would be a same to send it out in parts, but best of luck with it all
steve
remember reading the tread when this was being built looked an awsome car once complete and would be a same to send it out in parts, but best of luck with it all
steve
27 August 2009, 05:06 PM
#16
Scooby Regular
Thread Starter
iTrader: (35)
Join Date: Nov 2006
Posts: 2,784
Likes: 0
Received 0 Likes
on
0 Posts
Car would be for sale complete, but I would have to ask for £20k as it is, which I don't beleive many people have lying around.
I reckon I can generate that figure breaking it of all the expensive parts, and then also selling the car in a lower state of tune.
I reckon I can generate that figure breaking it of all the expensive parts, and then also selling the car in a lower state of tune.
27 August 2009, 05:24 PM
#17
wow this must be really ahrd for you to do, considering all the time and hard work that went into it. hope everything works out neil as you must have some bloody good reason to brake it soo soon
steve
steve
