HKS FMIC, APS Induction, H&S Cente, GT Up-pipe for Classic
#1
HKS FMIC, APS Induction, H&S Cente, GT Up-pipe for Classic
Ok, garage clearout time! Note for both the IC's i ave the HKS pipe joiners but they are total gash. As many will know best to replace with samco 63mm joiners. Here is why...
On with the sale!
Here we go:
HKS FMIC V5/6 and Black Powdercoated pipework. Has a dent in the top of the core from previous owner but still fits and performs fine. Pipework modified to take standard DV (or any other DV with standard takeoff) and an EGT which some aftermakert ECU's may require. but this is blanked at the moment as i did not require and EGT. £300
HKS FMIC V4 but pipework can be modified to fit a V5/6. Core has only just been chemically flushed so nice and clean inside. £350.
APS CAIK (Cold Air Induction Kit) Inner wing mounting. V5/6 fitment. Sources the cold air from the inner wing and protected from heatsoak in the engine bay. I have snapped on of the bolts on the mounting bracket! but tis has not affected the fitment. £125
Innerwing blanking plate wth CF effect vinyl and an APS CF badge. Offers if anyone wants it?
Haywood & Scott 2.5" strait through centre. Very nice bit of kit. has the flare in flange at the DP end to accomodate the flare of the DP if it does not have a flat flange. NO dents are scratchs anywhere. £75
GT Spec Gen II 3 bolt up-pipe. Freshly wrapped in DEI Titanium heatwrap. Wrapped and never fitted. This wrap is £80 a roll and has to be cut with tin snips! £70
I be right by junction 4 of the M25. Orpington.
Cheers!
Matt
matt.johnson@graffiti-solutions.co.uk
07740336145
PM me
On with the sale!
Here we go:
HKS FMIC V5/6 and Black Powdercoated pipework. Has a dent in the top of the core from previous owner but still fits and performs fine. Pipework modified to take standard DV (or any other DV with standard takeoff) and an EGT which some aftermakert ECU's may require. but this is blanked at the moment as i did not require and EGT. £300
HKS FMIC V4 but pipework can be modified to fit a V5/6. Core has only just been chemically flushed so nice and clean inside. £350.
APS CAIK (Cold Air Induction Kit) Inner wing mounting. V5/6 fitment. Sources the cold air from the inner wing and protected from heatsoak in the engine bay. I have snapped on of the bolts on the mounting bracket! but tis has not affected the fitment. £125
Innerwing blanking plate wth CF effect vinyl and an APS CF badge. Offers if anyone wants it?
Haywood & Scott 2.5" strait through centre. Very nice bit of kit. has the flare in flange at the DP end to accomodate the flare of the DP if it does not have a flat flange. NO dents are scratchs anywhere. £75
GT Spec Gen II 3 bolt up-pipe. Freshly wrapped in DEI Titanium heatwrap. Wrapped and never fitted. This wrap is £80 a roll and has to be cut with tin snips! £70
I be right by junction 4 of the M25. Orpington.
Cheers!
Matt
matt.johnson@graffiti-solutions.co.uk
07740336145
PM me
Last edited by -Spooky-; 16 September 2009 at 09:35 AM.
Trending Topics
#10
Thread
Thread Starter
Forum
Replies
Last Post
serpico
ScoobyNet General
20
01 April 2019 07:47 AM