EJ20T closed deck block with heads and ancilaries
#1
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2009
Location: edinburgh
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
Due to a project coming to an end due to lack of funds and family comitments my engine and all other parts are up for sale ( see 94 sti ra standard parts and aftermarket parts for other items )
the engine had a timing belt fitted about 6 months ago just before the engine was purchased from a car which had rear damage the front crank seal has also been replaced , has crosshatch markings above the crank sensor , behind the flywheel and also over the top of the engine and around the oil filter so its a genuine closed deck.
has the standard sti forged pistons and standard crank and rods with v2 sti heads not sure if these are solid lifters but it definately feels completely different from a wrx as i had driven the car it came out of before the accident a while ago maybe the ecu i dont know ?
engine does not knock and is very smooth and free reving for its age in my opinion has covered 70 451 miles to be exact
engine comes with the following :
inlet manifold
paddle clutch
flywheel is not the cast item it seems different dont know if its a billet one its matt black in colour and the engine does rev really freely so.... not saying for sure as it has no holes in the flywheel but reving the engine is very responsive .
power steering res and pump
alternator
manifold ( has had the lambda position blocked as the sensor was moved behind the turbo to stop damage if the tip shattered and entered the turbo )
running engine basically
engine does not come with :
td05 turbo
up-pipe
coil packs
spark plugs
pics can be sent of the cross hatch markings and the engine in general if needed
price is 800 DELIVERED open to offers but not 350 as someone asked ealier![Lol](https://www.scoobynet.com/images/smilies/lol.gif)
if delivery is needed i can see how much it will cost to paletise
thanks for lookin merry xmas
the engine had a timing belt fitted about 6 months ago just before the engine was purchased from a car which had rear damage the front crank seal has also been replaced , has crosshatch markings above the crank sensor , behind the flywheel and also over the top of the engine and around the oil filter so its a genuine closed deck.
has the standard sti forged pistons and standard crank and rods with v2 sti heads not sure if these are solid lifters but it definately feels completely different from a wrx as i had driven the car it came out of before the accident a while ago maybe the ecu i dont know ?
engine does not knock and is very smooth and free reving for its age in my opinion has covered 70 451 miles to be exact
engine comes with the following :
inlet manifold
paddle clutch
flywheel is not the cast item it seems different dont know if its a billet one its matt black in colour and the engine does rev really freely so.... not saying for sure as it has no holes in the flywheel but reving the engine is very responsive .
power steering res and pump
alternator
manifold ( has had the lambda position blocked as the sensor was moved behind the turbo to stop damage if the tip shattered and entered the turbo )
running engine basically
engine does not come with :
td05 turbo
up-pipe
coil packs
spark plugs
pics can be sent of the cross hatch markings and the engine in general if needed
price is 800 DELIVERED open to offers but not 350 as someone asked ealier
![Lol](https://www.scoobynet.com/images/smilies/lol.gif)
if delivery is needed i can see how much it will cost to paletise
thanks for lookin merry xmas
Last edited by johngoulding; 25 December 2009 at 10:02 PM.
#3
Scooby Regular
iTrader: (16)
Join Date: Apr 2003
Location: Curlew FPSO
Posts: 2,771
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Oh Edinburugh. How much is it if I pick up?
You about in the next week? im from Dundee area could come down for a look. Could you please e-mail me some pics on
ciaranboylan99@yahoo.co.uk
You about in the next week? im from Dundee area could come down for a look. Could you please e-mail me some pics on
ciaranboylan99@yahoo.co.uk
Last edited by Ciaran; 25 December 2009 at 10:10 PM.
#4
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2009
Location: edinburgh
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Oh Edinburugh. How much is it if I pick up?
You about in the next week? im from Dundee area could come down for a look. Could you please e-mail me some pics on
ciaranboylan99@yahoo.co.uk
You about in the next week? im from Dundee area could come down for a look. Could you please e-mail me some pics on
ciaranboylan99@yahoo.co.uk
the engine is in 100 % working order so u will have no worries , regretting selling it bit of u dull one really but eh family first plus i cant afford to keep on with the project will email u a pic tomorow morning mate at about 10 oclock in the morning expect an email , cheers for the interest mate
![Thumb](https://www.scoobynet.com/images/smilies/thumb.gif)
#6
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2009
Location: edinburgh
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
pic was a bit crap lol ma bad . if u are still wanting to view then i can show u markings upon viewing in the pic its just above the crank sensor but its hard to see due to quality of pic , sorry mate
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
bluebullet29
General Technical
9
05 October 2015 02:17 PM