***Breaking good spec classic. Apexi Power FC, AVC-R, Cusco, Brembo's, HKS, H&S, ***
#1
Scooby Regular
Thread Starter
iTrader: (35)
Join Date: Nov 2006
Posts: 2,784
Likes: 0
Received 0 Likes
on
0 Posts
***Breaking good spec classic. Apexi Power FC, AVC-R, Cusco, Brembo's, HKS, H&S, ***
Right, I bought this car a little over a fortnight ago, after a 700 mile trek, knowing that it had a head gasket problem.
After hearing it running, I repaired the problem and looked forward to having some fun with the car, which I did, for a short while.
However after a week the bottom end has started to grumble.
I can no longer justify spending any more money on it, so I have decide to break it.
The car was a great little rocket with excellent power delivery and awesome braking ability.
It had been mapped by Andy Forrest, and I was extremely surprised how quick it was for the level of spec. I can only put this down to the quality of all the various components and of course AF's mapping.
Here are a few pics of various parts on the car...
Firstly, the car
Parts
16" wheels and worn sticky Yoko tyres (ideal track day jobbies) £100.00
Autobahn 88 FMIC £160.00
Pre facelift front bumper, cut out for FMIC, in 406 silver. £80.00
STi RA version 2 cylinder heads, recently skimmed and pressure tested in excellent condition. These are the under bucket shim, solid lifters type and love to rev. £200.00
550cc PH 2 injectors (SARDs) £260.00
PH 2 to PH 1 adapters £30.00
Fuel pressure regulator c/w adapter £55.00
Apexi induction kit £65.00
Proffesionally ported and wrapped headers/up pipe. I have had these off the car recently, and a really good job has been done £80.00
PH 1 Inlet manifold insulating spacers, 10mm. £30.00
TD05 16G, ported by Andy Forrest in excellent condition. £200.00
Forge dump valve to fit FMIC pipework £40.00
Maf sensor £60.00
Brake master cylinder stopper SOLD
Front strut brace £35.00
Rear strut brace £35.00
Cusco Rear Anti roll bar, adjustable £70.00
Hayward and Scott hi flow cat down pipe, wrapped. This is the 3" version, and is listed on their site at £611.00 new, passes the MOT £300.00
Parts still available..
Centre console storage £25.00
Mint plastic header tank £25.00
Rear bumper
O/S/R Door
N/S/R Door
N/S/F Door
Front wings
Headlights
Anything you are interested on, but not listed please contact me via either PM, or email at neilrobinson05@aol.com
After hearing it running, I repaired the problem and looked forward to having some fun with the car, which I did, for a short while.
However after a week the bottom end has started to grumble.
I can no longer justify spending any more money on it, so I have decide to break it.
The car was a great little rocket with excellent power delivery and awesome braking ability.
It had been mapped by Andy Forrest, and I was extremely surprised how quick it was for the level of spec. I can only put this down to the quality of all the various components and of course AF's mapping.
Here are a few pics of various parts on the car...
Firstly, the car
Parts
16" wheels and worn sticky Yoko tyres (ideal track day jobbies) £100.00
Autobahn 88 FMIC £160.00
Pre facelift front bumper, cut out for FMIC, in 406 silver. £80.00
STi RA version 2 cylinder heads, recently skimmed and pressure tested in excellent condition. These are the under bucket shim, solid lifters type and love to rev. £200.00
550cc PH 2 injectors (SARDs) £260.00
PH 2 to PH 1 adapters £30.00
Fuel pressure regulator c/w adapter £55.00
Apexi induction kit £65.00
Proffesionally ported and wrapped headers/up pipe. I have had these off the car recently, and a really good job has been done £80.00
PH 1 Inlet manifold insulating spacers, 10mm. £30.00
TD05 16G, ported by Andy Forrest in excellent condition. £200.00
Forge dump valve to fit FMIC pipework £40.00
Maf sensor £60.00
Brake master cylinder stopper SOLD
Front strut brace £35.00
Rear strut brace £35.00
Cusco Rear Anti roll bar, adjustable £70.00
Hayward and Scott hi flow cat down pipe, wrapped. This is the 3" version, and is listed on their site at £611.00 new, passes the MOT £300.00
Parts still available..
Centre console storage £25.00
Mint plastic header tank £25.00
Rear bumper
O/S/R Door
N/S/R Door
N/S/F Door
Front wings
Headlights
Anything you are interested on, but not listed please contact me via either PM, or email at neilrobinson05@aol.com
Last edited by Neil..; 02 February 2010 at 09:16 PM. Reason: List updated, NEW PRICES :)
#3
Scooby Senior
iTrader: (14)
Over £3000 in bits... obviously worth a LOT MORE broken than it was as a car considering what Cal sold it for.
Told him he should have broken it if he didn't have the inclination to fix it.
I sold Cal that HKS Hyper system for £240 about 8 months ago, I'd be happy to buy it back............... but not at £300
£255 shipped any good?
Told him he should have broken it if he didn't have the inclination to fix it.
I sold Cal that HKS Hyper system for £240 about 8 months ago, I'd be happy to buy it back............... but not at £300
£255 shipped any good?
#7
Scooby Regular
Thread Starter
iTrader: (35)
Join Date: Nov 2006
Posts: 2,784
Likes: 0
Received 0 Likes
on
0 Posts
It is for a version 1 & 2 car.
Over £3000 in bits... obviously worth a LOT MORE broken than it was as a car considering what Cal sold it for.
Told him he should have broken it if he didn't have the inclination to fix it.
I sold Cal that HKS Hyper system for £240 about 8 months ago, I'd be happy to buy it back............... but not at £300
£255 shipped any good?
Told him he should have broken it if he didn't have the inclination to fix it.
I sold Cal that HKS Hyper system for £240 about 8 months ago, I'd be happy to buy it back............... but not at £300
£255 shipped any good?
FYI, the car now stands me at a lot more than what I paid Cal for it...
I can arrange shipping to Germany, but I would prefer UK buyers preferably.
Trending Topics
#8
Scooby Regular
Thread Starter
iTrader: (35)
Join Date: Nov 2006
Posts: 2,784
Likes: 0
Received 0 Likes
on
0 Posts
The turbo is still 90 degree entry.
I'm based near Blackpool, Lancashire.
For anyone looking by the way, I do not accept paypal.
Only bank transfers, cash on collection, or cheques.
PM's replied.
Neil.
For anyone looking by the way, I do not accept paypal.
Only bank transfers, cash on collection, or cheques.
PM's replied.
Neil.
#12
Scooby Regular
iTrader: (12)
Join Date: Mar 2002
Location: Lancs, UK
Posts: 1,818
Likes: 0
Received 0 Likes
on
0 Posts
Very interested in the 17" wheels, I am local too so can collect
What model of Falken tyres are they, how much tread do they have and are all the wheels in good condition like the one pictured?
What model of Falken tyres are they, how much tread do they have and are all the wheels in good condition like the one pictured?
#16
Scooby Regular
iTrader: (12)
Join Date: Mar 2002
Location: Lancs, UK
Posts: 1,818
Likes: 0
Received 0 Likes
on
0 Posts
I definately want them and will be able to get them this weekend or maybe Friday afternoon
Last edited by Rich D; 21 January 2010 at 08:04 AM.
#24
Scooby Regular
iTrader: (24)
Join Date: Oct 2009
Location: Aberdeen
Posts: 2,604
Likes: 0
Received 0 Likes
on
0 Posts
hi mate is that 200 delivered would you take 185 delivered also im at work at the mo and due to the comps im unable to view pics i will have a look tonight is the avcr in good cond i.e scratches/scrapes (1st refusal)
steve
steve