SUBARU PIAA PRODRIVE DRIVING LIGHT KIT
06 April 2010, 05:50 PM
#1
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: May 2009
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
SUBARU PIAA PRODRIVE DRIVING LIGHT KIT
The item is a PIAA driving light / lamp kit fitted to the classic Impreza by Prodrive.
The kit consists of;
A pair of PIAA driving lamps / lights (currently fitted with 55w bulbs)
Two mounting brackets
PIAA external relay
PIAA external power loom
Over ride cable
Intermediate headlamp / light loom
This kit is in good condition and all of the wiring is intact!! There has been NO cutting of any of the wires to remove this from the vehicle.
You will see some discolouration on one of the lamps, this is the only issue with the item.
This, I must hasten to add does not affect it’s operation.
This item was fitted to my Impreza MY00.
These driving lamps have an external wiring loom to that of the lights originally installed on the Impreza. This is due to the current that is drawn from the 130w bulbs that this item uses. As you would expect from an external wiring loom, there is also an external relay for this kit. There is intermediate headlamp loom, which allows the kit to obtain it’s switch feed from the main beams. The ‘override’ cable feed is taken from this and fed to the foglight switch inside the car, when it is ‘switched’ it provides the feed to turn on the driving lamps.
£200 + postage ono
The kit consists of;
A pair of PIAA driving lamps / lights (currently fitted with 55w bulbs)
Two mounting brackets
PIAA external relay
PIAA external power loom
Over ride cable
Intermediate headlamp / light loom
This kit is in good condition and all of the wiring is intact!! There has been NO cutting of any of the wires to remove this from the vehicle.
You will see some discolouration on one of the lamps, this is the only issue with the item.
This, I must hasten to add does not affect it’s operation.
This item was fitted to my Impreza MY00.
These driving lamps have an external wiring loom to that of the lights originally installed on the Impreza. This is due to the current that is drawn from the 130w bulbs that this item uses. As you would expect from an external wiring loom, there is also an external relay for this kit. There is intermediate headlamp loom, which allows the kit to obtain it’s switch feed from the main beams. The ‘override’ cable feed is taken from this and fed to the foglight switch inside the car, when it is ‘switched’ it provides the feed to turn on the driving lamps.
£200 + postage ono
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM
Danny0608
Subaru Parts
0
12 September 2015 02:59 PM
