Caged and Seam welded GC8 Rally Car breaking
29 May 2010, 06:50 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2009
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Caged and Seam welded GC8 Rally Car breaking
Hi everyone...
I am selling my GC8 rally prepped car as have taken a liking to circuit racing and amnow building an R34
Anyway...
Seam welded GC8 MY95 Chassis, fitted with custom cages CDS 12 point roll cage, painted white inside and company colours outside. It has fitted a reconned JDM 5 speed, all shafts etc. Standard brakes, doors etc.
Bulstien tarmac shocks and springs all round. With V5/logbook etc This car has never been finished or raced so its all straight and ready to rock and roll if you put the time in!
£1000ono (the cage alone is £900 not fitted!)
Basically what you see in the pics is what you get! (except for FMIC which is £150ono incl all pipework)
Performance Exhuast system (decatted) with rather large tail pipe (Think its 3" all the way though) £100ono
GC8 flocked dash by AutoFlock (vert high qwaulity never fitted): £150ono
The 22B engine has been sold.
XS Power ebay style FMIC with all pipework £150ono
Reversed inlet manifold with SARD injectors, TB, and fuellabs regulator and aeroquip fittings with equal fuelrails (not including engine): £400ono
Any questions please message or call me on 07891 328829. veiwing welcome and reccomended here at M-Tech, 41B Main Street, West Wilts Trading Estate, Wiltshire BA14 4JU
More pics if wanted
Cheers,
Matt
I am selling my GC8 rally prepped car as have taken a liking to circuit racing and amnow building an R34
Anyway...
Seam welded GC8 MY95 Chassis, fitted with custom cages CDS 12 point roll cage, painted white inside and company colours outside. It has fitted a reconned JDM 5 speed, all shafts etc. Standard brakes, doors etc.
Bulstien tarmac shocks and springs all round. With V5/logbook etc This car has never been finished or raced so its all straight and ready to rock and roll if you put the time in!
£1000ono (the cage alone is £900 not fitted!)
Basically what you see in the pics is what you get! (except for FMIC which is £150ono incl all pipework)
Performance Exhuast system (decatted) with rather large tail pipe (Think its 3" all the way though) £100ono
GC8 flocked dash by AutoFlock (vert high qwaulity never fitted): £150ono
The 22B engine has been sold.
XS Power ebay style FMIC with all pipework £150ono
Reversed inlet manifold with SARD injectors, TB, and fuellabs regulator and aeroquip fittings with equal fuelrails (not including engine): £400ono
Any questions please message or call me on 07891 328829. veiwing welcome and reccomended here at M-Tech, 41B Main Street, West Wilts Trading Estate, Wiltshire BA14 4JU
More pics if wanted
Cheers,
Matt
Last edited by mattatmtech; 29 May 2010 at 06:52 PM.
Trending Topics
30 May 2010, 07:30 PM
#15
Scooby Regular
Thread Starter
Join Date: Aug 2009
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
After a few requests, I am happy to split the inlet manifold down...
The manifold: SOLD
Fuel Rails, Regulator and Aeroquip fuel line setup £150
SARD 550cc injectors: £150
The manifold: SOLD
Fuel Rails, Regulator and Aeroquip fuel line setup £150
SARD 550cc injectors: £150
Last edited by mattatmtech; 30 May 2010 at 10:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM
