Performance Parts & Breaking Tein, HKS, CompBrake, FMIC, Headers, ECU, Greddy
19 August 2010, 12:45 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
HUGE Performance Parts & BREAKING Tein, HKS, CompBrake, OSGiken, Headers, ECU, Greddy
Per my previous thread selling my OS Giken Twin Plate Clutch. I have got some further items ready for sale, per my other post they have been removed from my white Subaru Impreza WRX (Genuine 280hp model) 1996 P reg Face lift model. The car has covered 69707 km’s and is in overall very good condition.
I purchased the car 18 months ago with a view of creating a fast road / track day car. I was well on with this when at the start of this year the car developed a problem which later was diagnosed as a broken valve spring. The car has since been sat in my garage awaiting engine build. The car was running sensible power as the next move on the car was an engine build , @ 1 bar with rolling road printout from Pro Sport Stockport.
I had spent a lot of money on this car and have loads of receipts for work done. When I bought the car it was a standard clean example which had not long been imported.
Due to a recent change in circumstances I, with regret, am having to clear some money from the car and as such am braking it. Everything except the engine is for sale, the more notable items are as follows:-
3 Bolt Headers wrapped in DEI heat wrap (with receipt)- £250
OS Giken Twin Plate Clutch, Fully refurbed 500 miles ago (with purchase receipt) - £695
Flat Performance Flashed ECU - My car was running 330bhp with printout from Pro Sport at 1 Bar on this ECU no problems. - £130
IHI Turbo VF22, Good condition - £225
Front Mount Intercooler with Bumper and front splitter (just painted) for easier fitment, Very good condition (used for 500 miles) - £250
HKS EVC V Boost controller - £150 SOLD
Greddy Turbo Timer (White) - £20
Simota Induction (Used for 250 miles) - £30
Comp Brake 4 pot callipers (Black & White) with 320mm Bell & Rotor’s with braded lines (covered 1900 miles with receipt) - £650
Tein TYPE FLEX adjustable Race suspension, look this up its EDFC compatible, its not super street! (with receipt used for circa 5000 mile) - £695 - SOLD
Bailey Blow Off valve - £45
FSE Power Boost Valve (FSE 090) never fitted! - £50 - SOLD
Open mouth large down pipe with DEI heat wrap - £75
Exhaust back box with 4.5 tail pipe (with receipt) - £55
Short Shift - £10 - SOLD
Alloy facelift bonnet (slight damage to front edge) - £145 - SOLD
Alloy Boot with low level spoiler - £100
WRX 5 speed Gearbox - £195
Crystal face lift front lights - £70
Rear, clear indicator, UK spec (inc fog light within the unit) - £240
Carbon effect 2 dial pillar pod (not fitted) - £15
ALL PRICES EXCLUDE DELIVERY
As I am braking the car there are obviously other items for sale such as radiator, alternator, other body panels, glass, wheels (SOLD), interior (grey), shell, standard brakes, standard ECU, TMIC etc etc, just send me a message or ring.
Viewings of the items and car are welcome and I don’t mind sending pics on request.
Andy - 07533 450 437 or andymckenzie1977@btinternet.com
I purchased the car 18 months ago with a view of creating a fast road / track day car. I was well on with this when at the start of this year the car developed a problem which later was diagnosed as a broken valve spring. The car has since been sat in my garage awaiting engine build. The car was running sensible power as the next move on the car was an engine build , @ 1 bar with rolling road printout from Pro Sport Stockport.
I had spent a lot of money on this car and have loads of receipts for work done. When I bought the car it was a standard clean example which had not long been imported.
Due to a recent change in circumstances I, with regret, am having to clear some money from the car and as such am braking it. Everything except the engine is for sale, the more notable items are as follows:-
3 Bolt Headers wrapped in DEI heat wrap (with receipt)- £250
OS Giken Twin Plate Clutch, Fully refurbed 500 miles ago (with purchase receipt) - £695
Flat Performance Flashed ECU - My car was running 330bhp with printout from Pro Sport at 1 Bar on this ECU no problems. - £130
IHI Turbo VF22, Good condition - £225
Front Mount Intercooler with Bumper and front splitter (just painted) for easier fitment, Very good condition (used for 500 miles) - £250
HKS EVC V Boost controller - £150 SOLD
Greddy Turbo Timer (White) - £20
Simota Induction (Used for 250 miles) - £30
Comp Brake 4 pot callipers (Black & White) with 320mm Bell & Rotor’s with braded lines (covered 1900 miles with receipt) - £650
Tein TYPE FLEX adjustable Race suspension, look this up its EDFC compatible, its not super street! (with receipt used for circa 5000 mile) - £695 - SOLD
Bailey Blow Off valve - £45
FSE Power Boost Valve (FSE 090) never fitted! - £50 - SOLD
Open mouth large down pipe with DEI heat wrap - £75
Exhaust back box with 4.5 tail pipe (with receipt) - £55
Short Shift - £10 - SOLD
Alloy facelift bonnet (slight damage to front edge) - £145 - SOLD
Alloy Boot with low level spoiler - £100
WRX 5 speed Gearbox - £195
Crystal face lift front lights - £70
Rear, clear indicator, UK spec (inc fog light within the unit) - £240
Carbon effect 2 dial pillar pod (not fitted) - £15
ALL PRICES EXCLUDE DELIVERY
As I am braking the car there are obviously other items for sale such as radiator, alternator, other body panels, glass, wheels (SOLD), interior (grey), shell, standard brakes, standard ECU, TMIC etc etc, just send me a message or ring.
Viewings of the items and car are welcome and I don’t mind sending pics on request.
Andy - 07533 450 437 or andymckenzie1977@btinternet.com
Last edited by Stealthproject; 22 August 2010 at 03:44 PM.
Trending Topics
19 August 2010, 02:21 PM
#9
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Bonnet Provisionally Sold.
Worth mentioning per the pics the front bumper and splitter was professionally painted after the fitment of the intercooler so in Very good condition, Ideally want to sell with the FMIC as will ease fitment and the bumper has obviously been cut to fit, so not ideal on a car fitted with TMIC.
Cheers
Worth mentioning per the pics the front bumper and splitter was professionally painted after the fitment of the intercooler so in Very good condition, Ideally want to sell with the FMIC as will ease fitment and the bumper has obviously been cut to fit, so not ideal on a car fitted with TMIC.
Cheers
19 August 2010, 04:34 PM
#14
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
As requested, pics of the Turbo Timer, and HKS EVC V boost controller:
Pics of the Down pipe: NO PRICES INCLUDE DELIVERY
Pics of the Down pipe: NO PRICES INCLUDE DELIVERY
Last edited by Stealthproject; 19 August 2010 at 04:35 PM.
19 August 2010, 06:53 PM
#20
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
FSE is still for sale mate, and yes I am sure you can fit a pressure gauge to it but it does not come with the gauge. Item has not been fit as i had it ready to go just before the car experienced its problem. Cant find the box but as you can see in one of the pictures pipe, fixings and unit all together ready for use.
Cheers
Whilst writting, HKS Boost controller SOLD and short shift provisionally sold
Cheers
Whilst writting, HKS Boost controller SOLD and short shift provisionally sold
