Forced performance TD05 18G and classic bits
#1
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Jan 2008
Location: Burnley, Lancs
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
Forced performance TD05 18G and classic bits
Here for sale is a TD05 18G from forced performance in america. It is Basically an 18G turbine in a 16G exhaust housing thats been ported to allow for the 18G turbine blades to fit inside the housing, and then polished. It Is all stamped up with the forced performance logo and it has it's own serial number 0606200077. This turbo reaches full boost arround 300-500 rpm sooner than a standard 18g due to the smaller exhaust housing and porting work but still retaining the same power rating and top end performance as a standard 18g. The turbo has been removed as i am breaking the car. I have replaced all the exhuast studs and bolts as you can see from the pic. It has also had a new bottom water pipe. There is no movement in the shaft and all fan blades are as they should be. The turbo ran brill on my motor and made 385bhp on my uk classic at 1.5 bar, with no smoke. I bought this turbo second hand 18 mnths ago from the owner who had bought it. He had done 500 miles with it, and ive done 3.5k since, so its done 4k in total from new. These retailed new at nearly £800.00 at the time of purchase. £400.00 o.n.o + postage (£30.oo due to weight)
TURBO NOW SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Wagon WRX STI tail lights. Mint condition £200.00 o.n.o + postage (£15.00 due to item size) Lights reduced to £150.00
Subaru WRX STI rear spoilers, no gen in gloss white £200.00 o.n.o + postage (£30.00 due to size of item)
TURBO NOW SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Wagon WRX STI tail lights. Mint condition £200.00 o.n.o + postage (£15.00 due to item size) Lights reduced to £150.00
Subaru WRX STI rear spoilers, no gen in gloss white £200.00 o.n.o + postage (£30.00 due to size of item)
Last edited by biggazvr6; 08 September 2010 at 05:54 PM.
Trending Topics
#17
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Jan 2008
Location: Burnley, Lancs
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
Haven't got the print out as it was dun on a lap top but still very acurate. I just had gt spec headers up pipe and 3" downpipe bk system, 550 injectors, induction kit, 255 fuel pump, pfr6b colder plugs,silicone intake, standard ecu wiv ecutek map but wiv avcr boost controller, blow thru maff using a newage maff scaled to fit. standard uk engine. Made good power but it killed it eventually.
#20
Scooby Regular
iTrader: (11)
Join Date: Jul 2002
Location: Milton Keynes
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Haven't got the print out as it was dun on a lap top but still very acurate. I just had gt spec headers up pipe and 3" downpipe bk system, 550 injectors, induction kit, 255 fuel pump, pfr6b colder plugs,silicone intake, standard ecu wiv ecutek map but wiv avcr boost controller, blow thru maff using a newage maff scaled to fit. standard uk engine. Made good power but it killed it eventually.
Once its in and mapped I will post the results up
#22
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Jan 2008
Location: Burnley, Lancs
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
yeh sorry forgot the fmic, thats where the blow thru maff is set up in the intercooler pipe work. ill see if i can get hold of the guy to get a copy of the graph as im sure he will have it on his lap top still. Had om my car for two years, with no issues what so ever, then i got greedy with the meth without having map altered and kinda leaned things out a little. Very very slight rattle on big ends which i suspect may be beginings of baring failure, but is so quiet, i could of sold car as was and nobody would of known, but thats not me. Im still undecided wether or not t put my scdb 2.5 in???
Car was very quick for its power and has run in high 11's at scooby shootout last year. Video's are on you tube if you want to have a llok peggy at the car in action.
The bumper is my standard one with a rear difuser you can buy from ht auto's for arround 100 quid. Not easy to fit and get to luck right but if your good with body work and painting as i am its pretty straight foward.
Car was very quick for its power and has run in high 11's at scooby shootout last year. Video's are on you tube if you want to have a llok peggy at the car in action.
The bumper is my standard one with a rear difuser you can buy from ht auto's for arround 100 quid. Not easy to fit and get to luck right but if your good with body work and painting as i am its pretty straight foward.
#24
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Jan 2008
Location: Burnley, Lancs
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
The cars a track car so everything is in place. 6 spd tranny in there so all hunky dorry up that street. Already on with the build, collecting my sti 5 heads on friday i think. if you just go on you tube, type in scooby shoout out elvingtion 2009, its the white wagon on there.
also if yu search sprint series wagon thats also my car
#26
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Jan 2008
Location: Burnley, Lancs
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
not sure on 60ft time, ill have a llok for the ticket sum time. Yeh that was a vid of the18g with the standard uk engine with no meth. fairly impressed with the time to be honest for a dirty big wagon!!!!
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM